Resume - Pipe fitter welder

Misco Jobs

Resume #73857

CONTACT INFORMATION:
View contact information...

Objective
To obtain steady employment as a pipe fitter or pipe welder. I want to be able to show the quality of work that is expected and to be able to grow with the company for a long term commitment.

Work Experience
8/2007 - 7/2008 Pipe Fitter
AMS Staff Leasing, Alaska Ship & Drydock Ketchikan, AK.
Welding and fitting pipe for an experimental Navy ship. Building pipe spools for all systems of the ship. I also welded some of the hull panels during the construction of the modules.
Charlie White 228-326-6774
6/2007 Pipe Fitter
Fluidynamics International, Excursion Inlet AK.
Fitting and installing pipe, valves and hangers on a new anhydrous ammonia system for a seafood processing plant.
Carl Burgland 208-289-5245
5/2007 Pipe Fitter
Construction Workforce Inc, Industrial Resources Inc, Astoria OR.
Fitting and installing pipe, valves and hangers on a new anhydrous ammonia system for a seafood processing plant.
Rich Pomeroy 503 338 5230
4/2007 Welder - Fitter
Grus Personnel, O&M Industries. Eureka CA
I was at Evergreen Pulp and Paper welding Stainless steel pipe that was to be installed during the upcoming shutdown. I also did some work in the flack dryer replacing some filters. I went to DG power plant in Eureka and did some pad welding on a fan to repair the blades so they could balance it and get the boiler back online.
Williams CA at SK Foods.
I fabricated, welded and installed a stainless steel hopper and walkway.
888-230-9908
Welder - Fitter- Millwright
3/2007 Labor Systems, ARSI Davenport CA.
I fabricated a large hoper and welded as needed to install in a concrete plant. Repaired and installed air slides that were damaged.
503-684-5401
Welder - Fitter - Millwright
2/2003 - Present Leshowitz Welding, Naselle, Washington
* I did repairs on ships to include welding, fitting, replacing valves, pipe, hangers and what ever else was necessary. Various pipe projects in a variety of industrial settings, boiler shutdowns, and made stainless steel urns and bed frames from stainless tubing. Whatever came up that needed done I did.
* Scott Leshowitz 360-484-7118
Pipe welder
1/1996 - 2/2007 PSI, Nashville, TN
* Welding small and large bore pipe in a sugar beet plant.
Welder - Fitter
2/2003 - 9/2003 REPCON INC, Corpus Christi, Texas
* Replaced old pipes, hangers, valves in a hydrofluoric acid unit in a refinery in Ferndale WA.
Pipe and plate welder
1/1995 - 12/2002 Industra Inc, Portland, Oregon
* Doing shutdowns on hog boilers and recovery boilers in paper mills, saw mills and power houses. Compressor room piping.
Stainless steel pipe welder - Millwright
1/2000 - 6/2001 U.S. Trades LLC, Indianapolis, Indiana
* Design, build, install and incorporate different systems to completely upgrade a canning and bottle facility. The product lines, water lines and filtering system, CO2 and nitrogen lines and anhydrous ammonia system all had to be rerouted and installed so the plant could produce their product. I also had to remove and replace the old equipment with the new equipment before the lines could be run.
Stainless steel pipe welder - millwright
1/1998 - 6/2000 Midwest Trades LLC, Indianapolis, Indiana
* Worked on anhydrous ammonia system moving compressors and piping and running to new area for future use. Installed a nano-filtration water system and piping in a food plant.
Pipe welder
2/1997 - 2/1998 Cloudy & Britton, Mt Lake Terrace, Washington
* Installed and repaired anhydrous ammonia systems in food processing plants and cold storage warehouses. Welding pipe and hangers along with all the necessary valves and cooling towers.
Pipe welder
1/1994 - 6/1996 Kan-tech, Rockchester, NY
* Welding pipe and hangers in a paper mill for a new bleach plant and digester.
Education
9/1992 - 6/1993 Clatsop Community College, Astoria, Oregon
* Some College Coursework Completed„X

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1336)

Go to Search Parameters...

Brief Description

Avdanced scaffolder/ supervisor. IRATA Level one trained. offshore survival/ medical very good experence working offshore and on shore in the oil and gas industries.

Seasoned Senior Business Continuity and Crisis Management Executive looking for National and International Opportunities

Specialized in the Hydrographic Survey, Topographic Survey, GPS / Total Station Survey, Dredging and Off Shore Construction Survey, GIS and CAD data integration, Data Processing and fair sheet production.

I've a large idea about oil field industry, and especialy in slickloine operation, I worked in bouth gas and oil wells ,with differents completions...

Operations, Business Developement, International experience, North Africa, Saudi, Kazakhstan, Russia.

Instrumentation Technician, Instrument Specialist.

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

Oil/gas/water/wastewater electrical

24 years experience in the printing industry with over 15 years in supervising,managing.

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

Presently I’m graduate from Mara University of Technology (UiTM) Shah Alam. I have completed the Diploma in Civil Engineering. The details are listed in my resume.

Diesel Mechanic/Righand Apprentice

Critical Care Paramedic

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

having 3 yrs technical diploma & 1 yr boiler operation certificate, computer literate, worked in Libya/Saudi Arabia/Kuwait/Sudan/India in various energy field like, power plant, gas /steam turbo genset/ diesel engine /auxiliaries/utilities/oil field process 7 production operation / dcs -cont room

CSWIP Painting Inspector 3.0 Cert no.30494/Supervisor /IT Literate, CPCS Slinger (LOWLER)

Well servicing (Coiltubing, Wireline and Pumping Operations).

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

I have 2-3 years experience in drivin overhead gantry cranes both in cab and pendant. I also have 4-5 years experience in rigging and lifting

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Determine, develop and establish ownership records, based on review and interpretation of title opinions, legal documents, paysheets, or divisions of interest. Set up ownership records, changes in ownership based on analysis and interpretation of conveyance documents, probate proceedings.

24 years of Machinist experience, with knowledge in heavy and preventative maintenance, experience in the Industrial Mechanic/Millwright trade Supervision of production and quality control mechanical aptitude WHMIS and OHS training

im hardworking and willing to work on overtime

AT PRESENTLY WORKING IN KUWAIT NATIONAL PETROLEUM CO. KUWAIT AS SCHEDULER, I HAVE WELL KNOWLADGE IN PLANNING & SCHEDULING AS WELL EXECUTION OF SCOPE.

General Maintenance and Mechanical Field

Worked For Cheveron and other various maritime companys thru Unions as A QMED. Worked as a Pumpman on super tankers as well working for Military Sealift Command. Pumping ballast on all the ships i worked on...

Experienced self-starter in LNG and Gas commercial with strong managerial and problem-solving skills and oversea exposure in LNG Supply Chain Optimization

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Employment history with over 15+ years oil and gas exploration experience.

Extensive Industrial Mechanical Maintenance, Supervision, Planning & Coordination within Europe, Canada, Middle East, North / West Africa and the Caribbean.

Welding positin utilizing technical skills for a growth-oriented organization.

I have had over 4 years in the oil field and am currently a Driller, and 8 years in the US Army serving as a Signal Support Specialist.

Qualified Electrician. Hazardous Area Installation, maintanence, inspection and testing Specialist. IRATA level 1 rope access technician.

I am a highly motivated & adaptable materials/ logistics specialist with a thorough knowledge of all disciplines within material acquisitioning, inventory management and material logistics. My experiences have included responsibilities of high value projects mainly with in the drilling industry.

I am a 4 year landman with a very strong work ethic, a team player with very good verbal communication skills with landowners. I would be a great addition to any company needing an inhouse landman.

I have graduated from Bellingham Technical College and finished my AAS in Instrumentation and Controls Technology, I have experience in working with Emerson Process Management's DeltaV DCS System

Field Operator / Panel Operator Pre-Commissioning & Commissioning Startup, Shutdown And Plant Emergencies Handling

I have knowledge in Maintenance and Operation procedures. My experience is in PM's, Reliability, Planning & Scheduling. I would like to continue to grow in the Petroleum Industry and at present I am continuing my education in Operation Controls. I am also very interested in offshore or shift work.

IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company

Pipe fitter welder

Oil and gas industry for over 12 years.

Well Intervention, Well Services, Field Well Completion,

Sir, as I am working since couple of decades in oilfield both onshore and offshore I have come across all sorts of jobs related with mobile land and offshore rigs, jackup self elevated platforms, barges heavy lift ships upto 2ooo ton crane capacity, engines cat, GM, cummins, mudpumps,bop,X" valves

Second year apprentice steamfitter/pipefitter

Installation of ESD (emergency shutdown) and DCS (distributed control system).(honeywell brand)

I am a graduate with Chemistry in 1st class having 24 years experience as a Chemist/ Senior Lab Technician in Petroleum Refinery (Takreer, ADNOC) (10 Years), Natural Gas Plants(5 years) (in Malaysia and DUGAS), Petrochemical Plants (5 Years) (MTBE & Pentaerythritol) and 3 years in Pesticid

Microstation

As I am having good experience in Electrical field, working as a Electrical Technician for a contractor employee in Kuwait National Petroleum Company, Mina Al Ahamadi Refinery

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out