Resume - I am an AWS-Certified Welding Inspector and a Philippine licensed Mechanical Eng...

Misco Jobs

Resume #74012

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES:
To quest for a job in a highly competitive environment that will enables me to muddle through with the latest development in the inspection industry and to secure a permanent position in a high growth and globally operating company with considerable advancement opportunities.

CAREER PROFILE:
A highly motivated Certified Welding Inspector (AWS) and a Licensed Mechanical Engineer, with 15 years extensive onshore experience in QA/QC function in the construction of large Oil and Gas refinery, Floating Production Storage and Offloading (FPSO), Petrochemical plant (Polymer and Ethylene), Power plant and Pharmaceutical plant for both fabrication, erection and pre-commissioning stages in countries like Philippines, Singapore, Vietnam, Kazakhstan and Dubai UAE.

BRIEF SUMMARY OF EXPERIENCES
1. Ability to check or develop WPS/PQR and conduct WPQT base from ASME IX, Approved Standards & Specifications
2. Quality Control expertise in Welding, Piping, Tank fabrication/erection and FPSO Conversion at fabrication, erection and pre-commissioning stages
3. Welding/Welder Qualification of different positions, thicknesses, material types and other essential variables, in process Inspection, Actual testing, decision making in acceptance or disapproval base from ASME IX and project approved Specifications and Standards.
4. Knowledge in various kind of welding processes such as GTAW, SMAW, FCAW, GMAW, SAW and Orbital without filler metal addition, Afloat welding in FPSO conversion.
5. Ability to read blue prints like GA, Isometric, P&ID, Structural Fabrication and Erection drawings, Plot Plan, ship Hull repair and fabrication drawing, Storage tanks Fabrication/Erection Drawings
6. Conduct inspection according to approved Field Quality Control Plan (FQCP) or I&TP
7. Hull life extension Structural inspection and progress monitoring, FPSO Topsides utilities and process piping and welding inspection.
8. Ability to inspect different kinds and Grades of materials like Carbon steel, Stainless Steel, Hastelloy, Copper Nickel, Duplex and Super Duplex Stainless, Low Temp materials, Low, Medium and High Strength Steel or any material from the project requirements (Specified below).
9. Supervisory capabilities in handling sub-contractors and main contractors.
10. Material control and trace ability competence, Welding consumables control, welding and welder control.
11. Good Knowledge in NDE (RT films interpretation, MT, PT, PMI & PWHT) and destructive testing like soundness face, root and side bend Test, Tensile, Macro, hardness and impact Testing, pitting corrosion test, ferrite scope test.
12. Familiar with various kinds of inspection tools, welding processes, weld joint geometry and welding symbols, metallurgy, weld discontinuities, and proper documentation governing inspection and welder qualification.
13. Ability to prepare Test Packages Records, Test blocking in the master copy of P&ID and highlight in isometric drawings
14. Ability to perform line check, prepare punch list records & punch clearing. Ability to do as built configuration of pipes, identify different types of valves, bolts, pipe supports and gaskets. Witness pressure testing (Pneumatic / Hydrostatic / service Test) and reinstatement or restoration.
15. Ability to inspect painting, hot and cold insulation based from approved painting and insulation procedure.

16. Conversant with international codes and standards such as ASME II, ASME V, ASME VIII, ASME IX, ASME B31.1, ASME B31.3, AWS D1.1, API 1104, API 620/650, ASTM, ABS standards
17. Safety awareness (Support company's Incident and Injury Free working environment program, IIF)

STRENGTHS:
1.) A thorough knowledge in welding / piping inspection and proper documentation.
2.) Witnessing and monitoring of pressure testing activities, test package preparation and documentation, clearing in welding NDE and final review of welding dossier, clearing of all piping punch list items.

EDUCATION / QUALIFICATION / CERTIFICATION:
American Welding Society (AWS) – CWI (renewed till 2011), Certificate no.: 05010601, Setsco – Singapore - 2005
Mechanical Engineering board exam, License no.: 0046711, Manila, Philippines- 1995
Mechanical Engineering degree, University of the East, Caloocan City Philippines-1993
High school Education, Calintaan Municipal High School -1988– Third Honor
Elementary Education, Calintaan Elementary School – 1984-Third Honor
Computer literate - Microsoft excel, words, outlook, lotus 6.5, pro arc and news software, Internet.

EMPLOYMENT HISTORY:
I. CHEVRON International exploration and Production (Supplied by MCS (Houston/Dome expats) – Dubai, UAE
Position / Period: Hull Inspector (Structural) / Piping / Welding Inspector / 18-Nov-07 to 01-Apr-08
Project: Frade FPSO Conversion Project- Structural / Piping
Job Description:
Worked as Owner Representative and directly reporting to QA/QC Manager. Lump sum, turnkey supply and installation of Floating Production, Storage and Offloading (FPSO) facilities for the Frade field in Brazil. The FPSO has storage capacity of 1.5 million barrels of oil. An internal turret will be installed, designed for a maximum of 33 risers. Topsides facilities will be comprise of oil processing system sized for 100,000 BOPD, a gas compression and treatment plant, and a water injection plant sized for 150,000 BWPD. FPSO hull particulars includes conversion for 18 years design life, internal turret mooring system, accommodation for 120 people, offloading capacity of approximately one million barrels of export quality crude to stern moored export tanker every 10 day at peak production, Ship overall dimension is 337m length by 54.5 m breadth by 28 m depth.
Close surveillance inspection includes Crude Oil Tanks (COT) Cross-Tie brackets, Transverse and Longitudinal bulkhead stiffeners and inserts, Frames, Flare foundation, Gantry foundation, under deck brackets and longitudinal stiffeners, Bottom longitudinal stiffeners, all type of inserts, Stiffening flat bars, Stringer inserts and additional structures, Main deck module support, and Accommodation/Navigation decks, piping and plate materials inspection, welding consumables issuance and storage, welder qualifications, and surveillance of fit-up and welding visual inspection. Plate materials in ABS Standards includes High tensile AH 32, DH 32, EH32, AH36, DH36, EH36.
Topsides and Vessel Cargo Piping and welding inspection of materials like API 5L-B / X52, Duplex Stainless SA 790 UNS S31803, Super Duplex SA 790 UNS S32750, SA 312/TP316L & TP304L, A106/A53, Kubota pipes 1.25Cr(SA 335/P11), SA 333 LTCS, CuNiFe1.6Mn (90/10). Implement Incident and Injury Free (IIF) working environment program of Chevron at site.

II. Parsons / Fluor Daniel (PFD) international LLC – Tengiz, Kazakhstan
Position / Period: Welding Inspector / 23-May-07 to 18-Aug-07
Project: SGP- Second Generation Plant / Gas Plant Process and Utility Piping (Field)
Client: TCO- Chevron/Kazakhstan Government
Job Description:
Acting as Client Inspector involve in monitoring and surveillance of welding activities by the sub-contractors Check bolt torque per package and close Quality Verification Documents (QVD), Witness pressure testing. Preparation of daily welding production reports and submits to Non-destructive Examination weld summary "NEWS". Weld counting against Latest revision and as-built drawings. Revise drawing as per actual condition at site.

III. Technip Consortium– Vietnam Socialist Republic
Position / Period: Welding Engineer / 07-Aug-06 to 21-Apr-07
Project: Dung Quat Refinery Project – Storage Tanks/Piping (Field)
Client: Vietnam oil and gas Corporation (Petrovietnam)
Job Description:
Project Quality Management Team Player directly reporting to the QA/QC Manager. Involve in the review and approval of QC documents such as field quality control plan (I&TP), review and approve Welding Procedure Specification (WPS) and Procedure Qualification Record (PQR) for onshore and offshore sea water/cooling water intake pipelines (API-5L X52), steel structures for bridge application, steel structures process units, utility tanks (A36),underground pressure pipes & process piping (A106/A53). Witness & approval of WPQT and WQT for GTAW, FCAW, GMAW, SAW and SMAW processes, 1G, 2G, 3G & 4G positions for plate and 2G, 5G & 6G positions for pipe. Review and approve welding consumables control procedures, review of welders summary list, ID'S and certificates.Troubleshoot day-to-day queries regarding WPS/PQR. Witness and approve mechanical testing, Implement Quality Management System (QMS) and plan. Conduct inspection and supervision on utility and process tanks welding activities. Witness MT on the root pass and final pass of annular to Shell plate welding, Check plumbness, roundness, and levelness of tank shell plates, check orientation of tanks appurtenances, nozzles alignment, review of RT films and reports. Verify the accuracy of all welding related documents, check inspection level in request for inspection (RFI) against field quality control plan (FQCP). Witness vacuum box testing for bottom plates, bottom annular plates using vacuum box 6'' wide x 132'' long, roof plates and 90º L shape vacuum box equipment for shell to annular joints.

IV. UTOC Engineering private Ltd. - Singapore
Position / Period: QA/QC Welding/Piping Inspector (Shop/Field) / 01-Sep-05 to 30-May-07
Project: NS06 / SPS Project – Polymer/ethylene Plant Process and Utility Piping
Client: Denka Singapore pte. Ltd. (Petrovietnam)
Job description:
Worked as Main contractor Inspector and directly reports to QA/QC Manager, involve in supervision of welding and piping fabrication and erection activities, Verification of QMS being implemented at site, prepare WPS and conduct WPQT and witness Mechanical test. Prepare welding reports, conduct WQT on subcontractor's welders, close surveillance on subcontractors welding activities for carbon steel, stainless steel and hastelloy materials, review and identification of NDE requirements, review of welding summary reports, Preparation / review and clearing of test packages, verification of testing equipment before use, verification of welding electrodes and filler rod and their proper storage and ensure that the welders follow the approved welding procedures. Inspect pipes and fittings with 100% traceability against the Material Certificates (MTR) to be fabricated for all steam lines. Liaise with the third party inspector regarding MOM (Steam) lines. Inspection of jacketed pipes, conduct line checking and generate punch lists, witness pressure testing and flushing, inspection of painting and hot and cold insulation. Close monitoring of shutdown activities. Handover of test package records, RT films and all related documents compiled during construction period to owner representative.

V. Hiap Seng Engineering Ltd. - Singapore
Position / Period: QA/QC Lead Tank Inspector (Fabrication Shop) / 03-Apr-05 to 30-Aug-05
Project: Banyan Integrated Terminal Phase I – 27 units Oil Storage tanks
Client: Chiyoda Singapore / Vopak Terminal (S) ltd.
Job Description:
Worked as Sub-contractor Tank Fabrication Lead Inspector. Submit Welding Procedure Specification (WPS), IT&P, NDE Personnel Qualifications, NDE Procedures and Air Leak test procedure. Conduct WQT for Plate 1G, 2G, 3G and 4G positions using GTAW, SMAW and SAW (1G & 2G) and 6G for plates. Perform daily routine dimensional and welding visual inspection of shell plates with attached welded nozzles, beveling of roof/bottom annular plates bottom plates and shell plates. Check layout before cutting, rolling and beveling. Witness shell Plate Post Weld Heat Treatment (PWHT), Hardness Test, Magnetic Particle Test (MT), Penetrant Test (PT), and Prepare necessary documents as per fabrication activities. Dimensional and weld preparation Inspection of Telescopic tubes, Alignment verification and preparation of dimensional report and compile it in MDR.

Position / Period: QA/QC Lead Welding/Piping Inspector (Field) / 18-Aug-04 to 03-Mar-05
Project: Simvastatin Project- Pharmaceutical Plant Process and Utility Piping
Client: Foster Wheeler / Merck, Sharp and Dohme (MSD)
Job Description:
Acting as Lead Welding/Piping Inspector and directly reports to the QA/QC Manager. Set-up QA/QC department and documentation system at site, Submit all necessary project procedures, I&TP and other quality related documents, involve in the implementation of quality management system (QMS), Inspection of materials with 100% traceability against the MTR, welding inspection of CS (A106/A53/P1), SS (TP304/TP304L/TP316/TP316LP8), dissimilar materials (A106/A53P1 to TP304L/TP316L/P8) Chrome-molybdenum (P22) and hastelloy (C276 / P43). Conduct welder / brazer qualification test and preparation of qualification certificates, Perform in process inspection, Review of test package records, Perform Line checking and generate punch list, weld mapping, dimensional inspection, welding report, interpretation of RT films and verification of reports, orbital welding and boroscope inspection, pressure testing, flushing, spark or holiday detection test, surface preparation and painting inspection.
Conduct internal audit to make sure that the QMS, procedures and the specifications requirements have been implemented.

Position / Period: QA/QC Lead Welding/Piping Inspector (Shop / Field) / 16-Sep-03 to 17-Jul-04
Project: R&D expansion project (CCR-5 Filter Dryer & New Steroid Bay 5) – Process Piping
Client: Foster wheeler / Schering Plough

Position / Period: QA/QC Lead Welding/Piping Inspector (Shop) / 07-May-03 to 14-Sep-03
Project: Multi-Product Plant II- Pharmaceutical Plant Process and Utility Piping
Client: Foster wheeler / Schering Plough

Position / Period: QA/QC Lead Welding Inspector (Field) / 15-Apr-02 to 05-Feb-03
Project: R&D facility project-Pharmaceutical Plant Process and Utility Piping
Client: Foster wheeler / Schering Plough
Job Description:
Acting as Lead Welding/Piping Inspector and directly reports to the QA/QC Manager. Supervise QC inspectors for both shop and field under my area of responsibility. Coordinate and liaise with the owner and third party inspector regarding documentation and inspection. Conduct WQT for Carbon steel, Stainless steel, dissimilar material (SS/CS) and Hastelloy at 6G Position. Conduct line checking and prepare punch list record. Review documents before submission to the client inspector. Monitor and satisfy Non-destructive examinations requirement per line classes. Clear welding documents, Verification of the accuracy of number of joints against latest revision drawings. Prepare weld summary report. Verify Pressure test limit from P& ID and Isometric drawings in the test package and witness pressure testing. Conduct inspection of hot and cold insulation and painting.

Position / Period: QA/QC Welding/Piping Inspector (Field) / 01-Jun-01 to 14-Apr-02
Project: Seraya 2 Petrochemical revamps area project-Process and Utility Piping
Client: ABB/JGC / Seraya Chemicals
Job description:
Monitoring of daily welding production by each welder and prepare field inspection report and surveillance report. Monitor NDE per line class to satisfy project requirement. Conduct line checking and generate punch list (weld counting), witness pressure testing like Hydrostatic, Pneumatic and service test, check reinstated piping system, Make sure that all welding activities conform to the approved WPS, specifications and codes.

VI. National Power Corporation - Philippines
Position / Period: Operation / Maintenance personnel / 22-May-98 to 16-May-01
Project: Lubang Diesel Power Plant / Power Generation

VII. EEI Corporation - Philippines
Position / Period: Welding Inspector (Fabrication Shop) / 15-Jan-97 to 24-Feb-98
Project: Mahanagdong GPP- Structural member fabrication
Client: Kiewet / Holt Philippines
Job Description:
Involve in the shop fabrication of structural members such as pipe racks, pipe supports, walk ways, column, rafter, and trusses. Coordinate with the client inspector. Conduct fit-up visual and dimensional inspection before giving instruction for welding, conducts final visual inspection of welds in conformance with AWS D1.1, conduct dimensional check on the structural attachments location like stiffening plates, gusset plates/rib plates and bolt holes. Dimensional inspection and weld report preparation.

Position / Period: Welding Inspector (Fabrication Shop)/ 09-Feb-96 to 06-Nov-96
Project: PPC expansion project –Refinery Process/Utility Piping
Client: Fluor Daniel Pacific Inc. / Shell Philippines
Job Description:
Assigned as a replacement inspector for PPC Expansion Piping fabrication, Liaise with the site QC Manager in coordination with the outstanding documents necessary for submission before the delivery, perform visual inspection on welded piping components, and prepare inspection report and non-conformance report for materials and workmanship that did not conformed to the Codes, Specifications and Standards. Check NDE against the line list to satisfy the requirements as per line classes. Preparation of release notes for delivery.

Position / Period: Welding Inspector (Fabrication Shop) / 31-Nov-95 to 06-Feb-96
Project: Sprinkler system- Manufacturing Plant - Piping
Client: Fluor Daniel Pacific Inc. / Procter and Gamble Philippines

Job Description:
Worked as a welding inspector involved in the fabrication of Sprinkler system for a factory in Laguna Philippines, Liaise with the client assigned inspector. Ensure that all welding activities be in accordance with the approved Specifications, Codes and Standards. Perform visual inspection and prepare documentations in line with the project requirements of all fabricated pipes. Monitor welder's performances according to their repair rates. Prepare welding visual inspection reports and release notes before delivery.

Position / Period: Welding / Piping Inspector (Field) / 30-Nov-94 to 09-Nov-95
Project: 2x385 MW coal fired PP- Power Piping
Client: Mitsubishi Heavy Industries / NPC
Job Description:
Assigned as a Welding and Piping Inspector and primary duties is to conduct WQT, weld mapping, and visual Inspection of welds in power plant pressure piping such as turbine pressure pipes, super heater tubes (primary, secondary, and tertiary), economizer tubes, girdling tubes, roof tubes, cooling water tubes, blow down pipes & preparation of NDE request and check line list to satisfy NDE requirements as per line classes. Monitor storage of welding filler metal and rods especially the low hydrogen electrodes baking/holding. Monitor performances of the welder's based from their rejection rates. Witnessing of pressure test of heavy wall pipes like turbine pipes and super heater tubes.

Position / Period: Jr. QC Engineer (Field) / 06-Apr-94 to 27-Oct-94
Project: Shell STAR Project-Process and Utility Piping
Client: Fluor Daniel Pacific / Shell Philippines
Job Description:
Assigned as a rotating equipment Inspector involve in a Pump to pipe flanges alignment and pump to motor alignment inspection and preparation of reports. Coordinate with the client mechanical inspector for the final acceptance of rotating equipment alignment. Witness pressure testing, flushing, prepare NDE request, and prepare quality control inspection report (QCIR).

Additional Information.

I am a hard working fellow with a great desire and interest in Production, Quality and Safety relating to my jobs.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1336)

Go to Search Parameters...

Brief Description

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Free! I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)

Joint Ventures & Divestitures, Negotiation & Closing Strategies, Strategic Alliances & Partnerships

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers

Have more than 13 years of experience in log interpretation

I can give you very useful information about wellhead & X-mas trees and wellhead control systems in China

Offshore Oil Rig Motorman

Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist

Driller / Tool Pusher (Onshore / Offshore)

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

Rig mechanic with a vast experience

WELDER

To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.

Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.

Millwright/Industial Mechanic and Power Engineer 3rd class.

HVAC BOILER TECHNICIAN

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

I am an AWS-Certified Welding Inspector and a Philippine licensed Mechanical Engineer with 15 years experience in Welding/Piping/Structural/Tanks inspection.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Master Electrician with Millwright experience

32 years exp in seismic data processing. QC and interpretation

CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

I have worked in the energy and petrochemical industry for over 25 years. I am a machine shop and field supervisor and perform field service on refineries, water and power plants, etc. I have supervised numerous valve repair turnarounds and day to day maintenance on all major oil refineries in Sout

14 years experience in Coating / Painting field with BGAS-CSWIP Painting Inspector Grade II Certification.

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

city and guilds ,years ,1,2,3 . advance craft , higher national

Analyzer and Instrument Technician, with significant experience through training and certification

Extensive experience in power, petrochemical and utilities plant startup, operation and training

3 months project of Petrochemical marketing research , 3 years experiences in polymer trading, 7 years experiences in business analysis.

I have drive, motivation, confidence and determination.

Alberta B pressure welder/red seal certified. safety tickets all up to date

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

More then 20 years experience as Welder

I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.

Application to vacancy Medic (Doctor)

Skills & experience is mainly in the industrial/commercial sector

at present working on cyberbase rig totally computerised

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out