Resume - JOURNEYMAN CRANE OPERATOR

Misco Jobs

Resume #74279

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A position as a Offshore Crane Operator where my abilities, current Crane Operators License, and extensive experience in Rigging/Roustabout can be drawn upon to make a positive contribution toward the success and safety of your operation.

SUMMARY OF QUALIFICATIONS

„IFive years experience as a Crane Operator and Rigger, with a demonstrated ability to operate cranes safely and efficiently

„I Persistent TROUBLESHOOTER & PROBLEM SOLVER¡Xadept at performing inspections and diagnostic procedures to identify & solve mechanical problems

„IPlaces a high value on QUALITY IMPROVEMENT with a demonstrated capacity to detect flaws & inefficiencies, prevent errors, save time and eliminate waste

„I Clean driving record¡Xno accidents or moving violations

„I Former Volunteer Firefighter¡Xadept at inspecting and testing equipment

PERSONAL
PROFILE

„INeat, professional appearance / positive, flexible work attitude / nonsmoker
„IEnthusiastic worker - takes pride in completion of a job well done
„IEffective communication, organizational, time-management & interpersonal skills
„IHardworking TEAM PLAYER¡Xroutinely achieves goals beyond expectations
„IDetail-oriented and precise with exacting performance standards
„IPlaces a high value on quality craftsmanship and maintaining on-the-job safety
„IExtremely punctual with a steady work history and near perfect attendance record

WORK EXPERIENCE

PUGET SOUND NAVAL SHIPYARD / IMS Bangor/Bremerton, Washington
Journeyman Crane Operator [Dec 2004-present]
Operates cranes on piers and drydocks to lift and move major nuclear components, radar equipment, live ammunition, ship's structures, propellers, shafts, and other miscellaneous cargo. Frequently required to follow crane movement instructions by using power sound phones, exercising extreme care in following hand signals and precision to prevent costly accidents. Required to conduct weight-handling tests which involve moving large and heavy test weight loads that will exceed the crane's capacity and often in confined shop and dock areas where maneuverability is restricted and accuracy is crucial. Ensures that all weight-handling equipment are weight tested in accordance with existing instructions,P307 instruction technical code. Required to assist PACNAVFACENGCOM representatives while conducting load tests of special purpose service (SPS) cranes for validation and NAVFAC audit teams in conducting audits of weight-handling equipment. Incumbent may operate cranes fitted with excavating attachments. On an incidental duty basis, operates bridge cranes up to 100-ton capacity in confined shop area where maneuverability is restricted and accuracy is critical
Served on Code 740 Safety and Rec Committees
ƒ¤ƒnCurrent ATMS report available on request

Rigger [June 2002- Dec 2004]
Directed operation of cranes and similar equipment. Directed rigging teams of laborers. Selected and attached hoisting and pulling gear for lifting, moving, and positioning heavy machines and other heavy loads. Fabricated, installed and repaired ship and boat rigging and weight handling gear. Worked in conjunction with tugboats to moor Navy vessels into piers or dry dock. Participate in the emergency preparedness drills, safety meetings, and on the job training.
ƒ¤ Attended one year Helper Program twice a week on own time
ƒ¤ Selected to work on special emergency project in San Diego to put in a new motor, enerator and rotor into U.S.S. Ronald Reagan (February-March 2005)

BOB TURNER FORD COUNTRY / Albuquerque, New Mexico
Automotive Technician [May 2000-Oct. 2002]
Performed repairs on engines, brakes, cooling systems, and auto interiors, as well as general preventive maintenance work and cosmetic repairs for the only Ford Blue Oval Certified dealer-
ship in New Mexico. Frequently called upon to review and/or correct work of other technicians.
ƒ¤ Hired as Technician and advanced to increased responsibility after just five months

LES SCHWAB TIRES / Tacoma, Washington [January 2000-May 2000]
Wheel Alignment Technician

GOODYEAR TIRES & AUTOMOTIVE / Gig Harbor, Washington [1997-1999]
Service Technician
ƒ¤ Recipient of several meritorious pay raises

BAYDO¡¦S TRAILER SALES / Tacoma, Washington [1996-1997]
Lot Attendant & Trailer Deliveryman

EDUCATION TWO YEAR CRANE APPRENTICESHIP / PSNS IMS Bangor, Washington
4,000 hours

Graduated: YELM HIGH SCHOOL / Yelm, Washington

OLYMPIC COMMUNITY COLLEGE / Bremerton, Washington
Completed 1 Year Certificate Program: Emphasis in Industrial Trade Fudamentals

CERTIFICATES RECEIVED

PUGET SOUND NAVAL SHIPYARD / IMS Bangor, Washington
¡´ FALL PROTECTION
¡´ SUBMARINE ACCESS
¡´ RIGGING TOOL FAMILIARITY
¡´ HAZORDOUS COMMUNICATION
¡´ WORKING SAFELY IN CONFINED SPACES
¡´ HAZORDOUS WASTE ORIGINATOR CERTIFICATE
¡´ FULL FACE AND HALF FACE RESPIRATOR TRAINING
¡´ BACK INJURY RECOVERY AND LIFTING TECHNIQUES
¡´ BASICS OF NAVAL EXPLOSIVES HAZARD CONTROL (AMMO 18 DL)

CURRENT PORTAL CRANES (Up to 85 Tons) / PSNS IMS Bangor, Washington
LICENSES ¡´ 3 hook 85 tons LeBear Crane
¡´ 3 hook 85 tons Amclide Crane
¡´ 2 hook 60 tons Craft Crane
¡´ 2 hook 60 tons Samsung Crane
¡´ 2 hook 60 tons Westmont Crane
¡´ 2 hook 25 tons Westmont Crane

BRIDGE CRANES
¡´ PNH Bridge Crane (up to 75 tons)
¡´ Grove Crane (up to 75 tons)

COMMUNITY ¡´ Volunteer Fire Fighter: YELM VOLUNTEER FIRE DEPARTMENT [1993-1995]
SERVICE ¡´ Advanced CPR and First Aid Training

References Furnished on Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1336)

Go to Search Parameters...

Brief Description

My main areas of expertise are negotiations, sales and account management. I have worked for many years as an entrepreneur being responsible for all operations in the Benelux region. So, business development experience is an essential part of my assets.

I have 19 years of oilfield experience most recently on 30000ft wells in areas of high pressure and high H2S. My familiarity with many rig types and conditions and ability to work without direct supervision makes me an asset to any progressive drilling company.

Chief Mate License with STCW 78/95 Convention, Norwegian Endorsement, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Helicopter Landing Officer Certificate, Basic Safety end Emergency Preparedne

1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES

I was developed my business at Refineries,Fuel Oil Tank Storage,Power Plant Projects,above ASME B-31..P-5-P-11-P-22-P-91-X10 CHROM-CS-SS--DUPLEX-SUPER DUPLEX

Electrical techinician work on FPSO/Rig and power plant

Working Offshore as an engineer and mechanic for 15 years

JOURNEYMAN CRANE OPERATOR

I am seeking an international position preferably in Middle East/Canada or rotating schedule. I have 15 plus years of Oil and Gas field experience as a Foreman/Sr. Technician/Tech. of numerous gas and oil production facilities.

I am highly motivated, self-starter, team player and resourceful. I have worked in harsh conditions and adapt easily to any situation. I have just finished working in Iraq on the RIO recover Iraq Oil project for KBR. Prior to that I worked in Chad on the ExxonMobil Oil Recovery Project.

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and ran pipe. Train others on PDMS.

7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00

Valve Service Technician

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Marine Maintenance Supervisor & Machinery Watchkeeper

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Free! Oilfield pumper, lease operator, supervise pulling units/ workover rigs

Qualified Electrician, have management skills, 22 years post apprenticeship experience.

Millwright Supervision

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

I am looking to be a part of a succesfull drilling team.

Licensed Electrical Supervisor / Project Manager with 30 years experience

Result oriented team player expert with extra organizational skills and over 20 years experience in the industry (Drilling, Completion and Work over)

Highly experienced commissioning/handover supervisor

Coded pipe & pressure vessel welder with valid certification

25 plus years working with subsea equipment offshore drilling/ 10 years varied welding experience.

Journeyman Pipefitter Journeyman Gasfitter Journeyman Plumber-Red Seal

pha,hazop,pfd,p&id,sop,aspen.htri

I have worked in the oil & gas drilling industry for over 19 years and possess a unique blend of experience and knowledge of how the industry works.

crane &heavy equipment operator,mechanic,welder & service manager

JOURNEYMAN MILLWRIGHT/FOREMAN 26 YEARS OF PROGRESSIVE EXPERIENCE AND DETAILED ORIENTED GOLD AND RED SEAL (V1984) JOURNEYMAN MILLWRIGHT/FOREMAN EXPERIENCED IN CONSTRUCTION AND PETROCHEMICAL PLAN ENVIRONMENTS

i have over 17 years experience with diesel and hydraulics mechanical and automotive installation and trouble shooting i am looking for a position where my experience would reduce downtime and improve production

Cable pulling Transformer and panel Erection &Installation

Career Objective:To be effective and efficient team member in Petroleum organizations, achieve Organizational and Individual goals. Completed M.Tech (Petroleum exploration) 1st year (1st&2ndsem) with 73%marks with specialization of Reservoir managements and Hydrocarbon Exploitation from June-2006 in

Objective: To work in a responsible and challenging position as a crane operator/deck foreman/crane inspector.

E&I Installations, Mechanical, HVAC, HSE

I am an experienced Electrical and Electronic Engineer with an HND degree in 1994. I also hold a certificate in woodward engine controls in 2003 in Holland.

TIG WELDER 14Y,ASNT LEVEL II ,RT,UT,MPT,PT.

Rig Electrician

Foreman on Oil Jobs

I started Oil and Gas Abstracting for Petroleum Abstract back in 1980. Recently been subcontracted independent Landman for Anteres Exploration, Dakotah Oil, WonderGem Resources, LLC and Dell Abstract and Title, LLC, preparing abstracts, ownership reports, leases, leasing and acquire minerals.

Lead Quality Engineer / Inspection Engineer / Welding Engineer

To obtain a position in the offshore oil & gas drilling industry which best utilizes my extensive mechanical skills and background while providing for career advancement. Currently residing in Fort Collins, CO, and in process of relocating to the Houston, TX, metropolitan area.

32 years of international and domestic deep water, jack-up barge and land rigs,in drilling, completion and workover in field operations.

I have worked on all sizes of rigs since 1983 and have gained a lot of down-hole experience in directional, horizontal and under-balance wells.

Equipment operator/open-cased hole operator/driver-commentary task assessment trainer.

Deepstrip rectification, in-depth examination, non-destructive testing, fault diagnosis and post installation testing of gas turbine engines

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

CSWIP – 3.1 welding inspector certified from TWI,All stage wise QC related activities for the fabrication and installation of pipeline, piping and structural for offshore platforms and other related works

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out