Resume - 14 years experience in Coating / Painting field with BGAS-CSWIP Painting Inspe...

Misco Jobs

Resume #74327

CONTACT INFORMATION:
View contact information...

Career Objective

Seeking for suitable position as Coating / Painting Inspector and to make significant contribution and make use of the experience, technical knowledge and skills gained in previous years.

Summery of Experience

14 years experience in Coating / Painting field with BGAS-CSWIP Coating / Painting Inspector Grade II Certification.

Professional Experience

„« Conversant with (i) BS codes and specification for corrocoating inspection (TRANSCO), (ii) BG N¢X P.A.9 and P.A.10 requirements, (iii) Material standard such as BS 5493 and ASTM standards.
„« Adept Knowledge of surface preparation of metallic substrate following BS 7079 and SIS-05-5900, different surface preparation methods, grade of cleanliness (SA1, SA2, SA2 1/2, SA3), hand and power tool cleaning (ST2, ST3), preparation of weld areas and other surface preparation standard such as SSPC-SP-10, SSPC-SP-12, RP287 and ISO8503-01.
„« Familiar with paint selection criteria and application methods, coating faults (BS2015), method of test for paints (BS3900) and destructive & NDT measures carried on coating.
„« Good surveillance in specific painting application (SPAS) of ferrous surfaces (long term & short term protection), damp ferrous surfaces, low pressure gas holders and non ferrous surfaces, observance of in service environmental conditions (RH, DP), cathodic protection on subsea, pipelines, safety requirements on site by following HASWA (1974), COSHH regulations (1988), EPA and IGE-SR-21.
„« Co-ordinate with the project of ASAB-BAB NGL pipeline coating rehabilitation (blasting and coating of pipeline by CTU).

Working Experience:

1. Presently Working with: Velosi certification (Qatar) LLC

Velosi Certification is a leading Inspection & Certification Company having World wide offices. Velosi Certification (Qatar) LLC is an approved Inspection & Certification Company of Qatar Petroleum. Website: www.velosi.com

Project 1: Raslaffan Messaieed Ethane Transmission Pipe Line Project
(RMETP) & LPG Pipeline project - Onshore.20¡¨ & 6¡¨ pipeline.
RMETP is a 60 km cross country below ground FBE coated 20¡¨pipeline from
Raslaffan to Messaieed.
Designation: Coating / Painting Inspector - Trainee (TPI).
Client: QATAR PETROLEUM
Contractor: Tekfen Construction & Installation Co.

Project 2: EPIC OF FLASH GAS/ SAG PIPELINE BETWEEN FSP & FMDS
This is a 6km 12¡¨ above ground pipeline between two plants.
Designation: Coating / Painting Inspector - (Full time TPI Representative).
Client: QATAR PETROLEUM
Contractor: Panorama Contracting & Engineering Services WLL

Project 3: EPIC OF ADDITIONAL GAS FILTERS AT NGL-3 AND POTABLE WATER SYSTEM FOR SMALL CRAFT BERTH.
Additional 3 Nos of Preasure Vessels (Dry Gas Filter, Pipeline Gas Filter & Expander Gas Filer) are being attached to the existing.
Designation: Coating / Painting Inspector - (Full time TPI Representative).
Client: QATAR PETROLEUM
Contractor: Panorama Contracting & Engineering Services WLL

Project 4: EPIC FOR UPGRADE OF FIRE WATER RING MAIN SYSTEMS AT KHATIYA MAIN, FAHAHIL MAIN,JALEHA AND DIYAB - DUKHAN
Installation of 48mtr (Diameter) Potable Water Tank at Dukhan.
Designation: Coating / Painting Inspector - (Full time TPI Representative).
Client: QATAR PETROLEUM
Contractor: Panorama Contracting & Engineering Services WLL

Job profile:
„« Surveillance inspection of implementation of Quality Plan, Specifications and Procedures for that Project.
„« Monitoring and witnessing field joint coating for both aboveground and underground Pipeline.
„« Inspection of calibration validity for all measuring devices and daily log for weather condition.
„« Assessing pre-blast and post blast condition of substrate prior to painting application.
„« Monitoring safe working practice.
„« Review documentation and report on a weekly basis.
„« Inspection of field joint coating (FBE) complies to the specification requirement such that DFT and Free from holiday, run, tear, sags, wrinkles & other coating defects.
„« Witnessing Surface preparation complies with visual standard and coating complies to the project specification.
„« Witnessing daily log for weather condition and calibration of measuring devices.
„« Maintaining QC-coating report log and reported on daily basis.
Period of Employment - Nov 2007 to till date

2. Worked With: Hempel Paints (Qatar) WLL.

Hempel Paints (Qatar) WLL is one of the leading manufacturer and supplier of Industrial, Marine and Decorative Paints in the state of Qatar since 1982. Web Site www.hempel.com. Worked as Coating advisor / Technical representative

„« Responsible for recommendation of the Coating Systems as per the Specification and the Costing of different recommended systems to the Customers.
„« Responsible for getting Approvals at different stages from Concerned Projects and its Submittals.
„« Co-ordination with Project Sales Representatives for the supply of Paint materials for the next few months on the basis of Predicted quantity given by them prior to the start of the work.
„« Co-ordination with Production Department and production schedule planning.
„« Coordination with Logistics to make sure that the Delivery of the material happens at the right time at the concerned Project Sites.
„« Closely work with the Contractors and Consultants to get the approval of the Hempel Products for that particular Project.

Period of Employment - Jan 2006 to Nov 2007

2. ICI PAINTS INDIA LTD.

Part of Global ICI Group. Manufactures and markets paints and speciality chemicals, having sales offices and distribution network, which spans the length and breadth of the country. Web site: www.iciindia.com. Worked as

TECHNICAL SALES EXECUTIVE

„« Technical Sales in-charge of Automotive paints sector in State of Kerala including Acrylics, Alkyds, NC, Polyurethane.
„« Supervises Territory Sales In charges (TSIs) and Secondary Sales Forces (SSFs). Reports to Regional Sales Manager.

„« Achieves the sales targets. Ensures proper man-management and maintain high morale in the team to meet the targets. Follows up and collect the payments.Develops new businesses, customers, clients and dealers. Manages stock and inventory. Organises, manages and attends trade promotions, conducts demonstrations and product trials.

„« Conducting Technical Trainings for the Customers.

Period of Employment - September 1994 - Dec 2005

Personal Information.

Nationality: Indian
Date of Birth: 04/11/1970
Marital Status: Married

Educational Qualification:

Bachelor of Science (Chemistry) from Mahatma Gandhi University -Kottayam,
Kerala - India (1991)

Professional Certification

BGAS-CSWIP Certified Painting Inspector- Grade 2 (BG 570356).

Computer Proficiency

Well versed in MS OFFICE & very good knowledge on Excel, MS Word and Power Point.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1336)

Go to Search Parameters...

Brief Description

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Free! I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

I"m a Skilled South African Millwright and Mechanical Fitter (Red Seal)

Joint Ventures & Divestitures, Negotiation & Closing Strategies, Strategic Alliances & Partnerships

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers

Have more than 13 years of experience in log interpretation

I can give you very useful information about wellhead & X-mas trees and wellhead control systems in China

Offshore Oil Rig Motorman

Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist

Driller / Tool Pusher (Onshore / Offshore)

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

Rig mechanic with a vast experience

WELDER

To fully leverage my working experience, education and potential, I am looking for an apprentice Millwright job and operator related positions at entry or intermediate level to continue my oil career in Canada.

Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.

Millwright/Industial Mechanic and Power Engineer 3rd class.

HVAC BOILER TECHNICIAN

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

I am an AWS-Certified Welding Inspector and a Philippine licensed Mechanical Engineer with 15 years experience in Welding/Piping/Structural/Tanks inspection.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Master Electrician with Millwright experience

32 years exp in seismic data processing. QC and interpretation

CAPEX & OPEX multiple projects. 22 years of EPC working background; oil & gas upstream EP, petrochemical, chemical, power generation, rail, water, nuclear & manufacturing (UK - Middle East), business & contractual awareness - FIDIC, IchemE Alliance agreement FOB, CIF, SMMIEC & SMM risk management

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

I have worked in the energy and petrochemical industry for over 25 years. I am a machine shop and field supervisor and perform field service on refineries, water and power plants, etc. I have supervised numerous valve repair turnarounds and day to day maintenance on all major oil refineries in Sout

14 years experience in Coating / Painting field with BGAS-CSWIP Painting Inspector Grade II Certification.

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

city and guilds ,years ,1,2,3 . advance craft , higher national

Analyzer and Instrument Technician, with significant experience through training and certification

Extensive experience in power, petrochemical and utilities plant startup, operation and training

3 months project of Petrochemical marketing research , 3 years experiences in polymer trading, 7 years experiences in business analysis.

I have drive, motivation, confidence and determination.

Alberta B pressure welder/red seal certified. safety tickets all up to date

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

More then 20 years experience as Welder

I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.

Application to vacancy Medic (Doctor)

Skills & experience is mainly in the industrial/commercial sector

at present working on cyberbase rig totally computerised

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out