Resume - Refractory field engineer, 40 years global experience in refractory/furnace cons...

Misco Jobs

Resume #77119

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To meet new challenges and widen the scope of possibility within this field. Also to increase awareness of importance of being environmentally friendly.
I am a time served refractory mason, with 40 years experience in refractory/furnace construction worldwide. My strengths are in the field, planning, training,build, and quality control, with the ability to communicate, and promote teamwork.

RECENT HISTORY
08/07-11/07
Dubal Dubai U.A.E.
Carbon bake oven,32 cell demolish/rebuild
Duties
Mobilization,material planning,site supervision.

10/ 06-06/07
Aluar Argentina-144 cell pot line,new installation.
Duties
Training of local masons, quality control,consultancy
02 / 06 –06 /06
Esso Refinary, Fawley, UK. Site Supervision PV2 – PS2. Turnaround.
Duties:
Site Management, Supervision, Quality Control on Various Refractory installations. Inc. Brickwork, Castable Gunite, Resco, Ceramic Fibre.
With Eastern European workforce.

08 /05 – 01/06.
Dubal Dubai, U.A.E.
Carbon Bake Furnace. 32 Cell Demolish/Rebuild.
Duties:
Sat up an Ran Training School for Asian Masons (200) Prior to Contract. During Contract was Responsible for build. Quality Control, Daily Surveys, Material Supply.

01/05 – 05/05.
Dubal Dubai, U.A.E.
Carbon Bake Furnace. 32 Cell Demolish/Rebuild.
Duties:
Training School, Demolition, Mobilisation, Survey, Labour Placement, Material Control, Build, Quality Control.

02/03 – 08/03.
Alcan Rotterdam Holland.
Carbon Bake Furnace, new Construction, Supervision.
Duties:
Setting out Labour Placement, Surveys, Material Control, Quality Control, and Liaison with Interpreter (Portuguese workforce).

Alcan, Fort William, Scotland
Pot Line Re-build
Duties:
Taking pots offline for demolition. Survey, re-build and put back on line. Various times between 2002 and present.

EXPERIENCE

* 1992 – 2000.
Quality control consultant For tunnel kiln project Johor Malaysia
Employed as Refractory Mason for most of the major glass furnace construction companies.
Employed as site Supervisor on Thermal Oxidiser contract for I.C.I. Taiwan.
Also employed as mason on Thermal Oxidisers on various sites throughout UK and Europe.

* 1984 – 1992 Director of own company.

* 1978 – 1984 C&W International: Field/Site Engineer.

* 1977 – 1978 Build and commission heat treatment plant Tabriz, Iran

* 1972 – 1976 C&W International: Mason.

* 1967 – 1972 British Steel: Apprentice Mason.

EDUCATION

General academic education.
Graduated 1972 from Foley Technical Collage of Engineering City& Guilds, Advanced brickwork.

EXPERIENCE

ALUMINIUM

Was directly involved in the installation, rebuilding and refurbishment of smelting and holding plants at major aluminium worldwide incl. DUBAL (Dubai), ALBA (Bahrain), VALCO (Ghana), ALCAN (Britain, Europe and Nigeria). Duties incl. Recruitment and control of local labour, building of units (on tools), setting up and running training programmes for masons at VALCO, DUBAL,and ALUAR.

COPPER

Main contract while running own business was to supply complete refractory service to I.M.I. Copper refinery was responsible for design to anode casting furnace, as well as all rebuilt and repair to converters, reverbs, blasts anode casters.

HEAT TREATMENT

Extensive background in this industry, Sealed Quench, Cyclic Anealers. Carburisers Tempering Furnaces. Installed and rebuilt many of these units with own company mostly at British car manufacturing plants.

STEEL

As well as serving apprenticeship with British Steel, have also been involved on many installations of walking beam type re-heaters and soaking pits as Superintendent/Site Manager.

OTHER INFO

Industrial waste, sewage, refuge incinerators (Foreman) ABU DHABI National Oil Company (Site Manager) for new installation of primary and secondary heaters on Ammonia Plants, AKZO, Holland (Foreman) also for installation of primary and secondary heaters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 1490)

Go to Search Parameters...

Brief Description

Experience in pipeline, Power Plat Installation

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Crane Operator/Deck Foreman, Level III, HLO, Supervisor, Safety Rep

I am looking to expand my knowledge and experience in the oil and gas industry, I have 5 years exp. as a well service floorhand and relief derrick hand. I am interested in Offshore drilling or related jobs.

I am looking for entry level offshore work.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

I would like to find a diversified employment opportunity where I can continue to learn and grow in both the drilling and completion/work over aspects of the oilfield.

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Looking to obtain Employment in the Oil & gas indusrty

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

I have 12 yrs cementing experince in UK and worldwide with the same company working with different Oil companies. I also have well-bore cleaning experince for 2 years. I have dealt with Mud, brines and different cemeting fluids.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

11 Years experience in oilfield

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Performing the day-to-day maintenance activities of the oil and gas plants in coordination with DCS Technicians and Sr technicians.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Sales, Engineering Project Manager

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Sir,I have about 18 years of experience in operation of various Chemical plants, oil refineries and oil and gas gathering stations in India and Arabian Gulf Onshore and Offshore. I am also having experience of operation on Modern DCS belonging to HONEY WELL TDC 3000 of USA, CENTUM of YOKO GAWA

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

I have more than 5 year of experience under valve manufacturing company.I worked with gate, globe, ball, NRV valves mostly with forged steel, cast steel, and stainless steel. But I have a experience of manual valve only.

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Pipefitter with supervisory and training facilitator experience

A professional LNG Technician/Engineer is looking for a position where his skills and education will add value to operations.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out