Resume - I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air...

Misco Jobs

Resume #77702

CONTACT INFORMATION:
View contact information...

Application for offshore Hydraulic crew post/ Riggers post

I would very much appreciate a chance to work in the offshore oil industry. Although I am a Qualified Hydraulic Specialist I have done an Off Shore Survival Course, and SAMTRAC through NOSA. I would like to enquire as to the possibility of employment as E.H.S. Officer, or, as part of a Hydraulic Crew or ROV Trainee, or any other position your company would suggest, on one of your offshore installations. I am more than willing and prepared to begin at the bottom and work my way up in your organization. As can be seen by my credentials I am a fast and willing learner.

At present I have no offshore experience and am thus very eager to actively participate in any training course(s) you expect me to attend and complete successfully in order to achieve my goal.

In Short:
I am an easygoing type of person and I get along with most people. I can and will work well under pressure alone or as part of a team. I also do not mind working away from home for extended periods of time. I can be trusted to do my work alone, as part of a team or as head of a team without any supervision. I am conscientious and responsible and can take and effectively carry out orders. I am hard working and I am prepared to undergo any drug test and medical examination your company requires. My past work and credentials indicate that I can be an asset to your esteemed company.

Personal Details
Nationality: S.A. Citizen by Birth
Marital Status: Married. (No dependents)
Language Ability: Fully Bilingual
Health: Excellent
Criminal Record: None
Military: S.A.A.F. 1975 - 1996
Religion: Dutch Reformed Church
Reliable Transport: Motor Vehicle.
Valid licenses: Code A & EC (Prof. Driving Permit: General &
Personnel. Expire 10.06.2009
School: Monument High. Grade 10. 1974

Education & Training Grade 10 & Post School
1. Trade courses and Trade test 02.01.1975 –
27.10.1978: Qualified as Aircraft Fitter
2. Petrols, Oils and Lubricants Quality Control
Completed 29.10.1981
3. Nosa Safety for Supervisors Completed
22.10.1982
4. Nosa Teletuition Safety training Course
1985
5. Senior Technical Course for Non Commissioned Officers 1986
6. Senior Technical Non Commissioned Officers Development Course 1986
7. Quality Management 1986
8. Life Enrichment Course 1988
9. Official Languages Testing Course (Africans & English) 1988
10. Quality Evaluation Course 1990
11. Life Enrichment Course 1990
12. First Aid Course 1991
13. Labour Relations Course for Supervisors 1993
14. Inspection, Preservation and Packaging Course. 1994
15. Aircraft Corrosion Control 1994
16. First Aid Course ?

Decorations and Medals: 1. Propatria Medal
2. Service Medal
3. Long Service Medal Bronze 10 Years
4. Long Service Medal Silver 20 Years
5. Unitas Medal

Commendations: 1. Colours Parade for Freedom of Hopefield
Signed by Mayor Baard 1989.
2. Expression of Thanks by AFB Langebaanweg for Good Service Signed by Col. Labuschagne

Computer Literacy: 1. M.S. Word
2. Excel
3. Internet & Email

Employment History / Job Description:

1. South African Air Force 1975 – 1996.

I. Qualified to work on following Aircraft, Airframe and Engine

Cessna 185 1st Line Servicings.
Kudu 1st and 2nd Line Servicings.
Dakota 1st Line Servicings.
Impala Mk1 Up to and Including 6 Monthly Servicings.
Bosbok 1st and 2nd Line Servicings

Competency for following Tasks on above Aircraft.
a. Marshalling b. Towing and Ground Handling c. Refueling d. Operating of Hobart Starters e. Ground Run f. 1st Line Servicing of Elect. Equip. as fitted to Kudu Aircraft. g. Removal and replacement of Safety Pins on Mk AS 06A Ejection Seats h. Operating and Driving Following Bowsers:
i. Bedford 4x4 4500LT ii. M/Benz 5000LT iii. Man 16000LT iv. M/Benz 26000LT i. Operating and driving Forklifts 3-7 T

Experience Gained in the Following Sections a. Head of Section Flight Line and Flight Line Servicings b. Aircraft Servicing Sections c. Base Aircraft Servicing Section d. Squadron Safety Officer at Air Force Base Langebaanweg for Three Years e. Acting Head of Section for Six Months Air Force Base Hoedspruit Mirage Engine Workshop f. Head of Section Wheel Bay Two Years Air Force Base Hoedspruit.

2. SMC Joint Venture 1997 – 1998
Worked as Hydraulic Fitter on Construction of Saldanha Steel
Assist with Construction of the Continuous Caster Hydraulic Systems including:

a. Hydraulic Pipe work from Hydraulic Room Valve Stands to Ladle Turret, Tundish Turret, Continuous Casting Machine (Segments), Pendulum
Shear, Rollout Table and Dummy Bar.
b. Charging of Hydraulic Accumulators. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. e. Commissioning of Systems
Assist with Construction of Electric Arc Furnace Hydraulic Systems including: a. Hydraulic Pipe Work in Hydraulic Room from Pumps to Valve Stands b. Hydraulic Pipe Work from Valve Stands to Furnace 1 and 2, Roof Lifting Cylinders, Roof Slew Motors, Roof Loosening Cylinders, Roof Elbows, Emergency Hydraulic Panels and Electrode Arm Turret. c. Charging of Hydraulic Accumulators. d. Flushing of Completed Systems. e. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. f. Commissioning of Systems. Assist with Construction of Ladle Heating Furnace Hydraulic Systems including: a. Hydraulic Pipes in Hydraulic Room from Pumps to Valve Stand b. Hydraulic Pipes from Valve Stand to Roof Lifting Cylinders, Electrode Arm Turret and Slew Motor. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc.

All of the above mentioned installations were done by bending 8mm up to 42mm stainless steel and carbon steel hydraulic tubing as well as installing ½" up to 24" stainless steel and carbon steel schedule piping. All pipe work was done with the assistance of coded welders.

My contract at SMC was ended upon the completion of the Steel Making Side of Saldanha Steel. An American Contracting Company – CBI, did the Iron Making Side of Saldanha Steel.

3. Fluid Flow Contracting up to 15 September 2008

Occupation: Hydraulic Specialist / Sales Manager.

a. As Hydraulic Specialist I did the flushing of the pipe work at the Corex at Saldanha Steel in conjunction with Raur Rine Chemicals for CBI b. As Hydraulic Specialist I did repairs on various Hydraulic Pumps, Motors, Cylinders and Valves directly for Fluid Flow Contracting. These were done in the workshop as well as on site. (The main make names dis- tributed by Fluid Flow are Parker, Vickers, Eaton, Charlyn, Bosch and Danfos, and thus I know them very well.)
c. I visited Industrial Sites to look at jobs, determined what spares will be needed, calculated how long it will take to do, considered safety aspects and all special equipment that will be needed to carry out particular installation or repair. d. Assisted with building of Hydraulic Power Packs and test Benches at Fluid Flow Workshop e. Assisted with planning, developing and manufacturing of a new Accumulation System at Pendulum Shear Hydraulic System at Continuous Caster at Saldanha Steel.
f. Worked on Shut Downs and Breakdowns at all hours of day and night. g. Was head of the day shift working on the repair (reinstall all hydraulic, pneumatic, water and grease pipes) at the Saldanha Steel Electric Arc Furnace Shell 1, after a Burn Through. Also lead the night shift repairing all of the same pipes at Saldanha Steel Electric Arc Furnace Shell 2, after a Burn Through.
h. Made up Hydraulic Hoses from single wire to multispiral hoses. i. Was part of the team Installing new Clay Gun and Drill on Furnace 2 at
Namakwa Sands Saldanha j. Designed and assisted in manufacturing of a Portable Tap Floor Drill for the Corex at Saldanha Steel. k. Modified Grease piping, Hydraulic piping and Water piping on Continuous Caster Segments to ensure quicker and easier changing of Segments on Breakouts and standard Maintenance. l. Was part of a 2 man team installing a 3" Pneumatic line complete with Dryer / Heater at Iron Granulation Plant at Saldanha Steel.
m. Designed 3" Refill line for Oil from Total Bulk Area to Continuous Caster Bulk Tank. (+/- 420m). Engineered Installation, Cleaning and Commissioning of line. n. Designed, contracted outside company for manufacturing, and was part of the 2 man team installing the Bin Opening & Closing Mechanism for
Tail end Bins on Mine at Namakwa Sands Brand se Baai.
o. Overall did various large Hydraulic, Pneumatic, Grease and Water Instal- lations at Namakwa Sands Saldanha, Namakwa Sands Brand se Baai, Saldanha Steel, Duferco Steel Processions, Southern Seas Fishing, Marine Products, Oranje Vis and Saldanha Fish Canning Factory. a. As Sales Manager all Incoming and Outgoing Sales were handled by me. I made sure that prices quoted corresponded with prices on delivery notes. I made sure that deliveries to the Stores were done on or before the dates stated on the clients official orders. I worked closely with the Workshop Manager to make sure that delivery notes for completed jobs went out in time to be signed off by the Client. b. I did Field / Site trips to look at jobs, ascertain what spares will be needed, calculated how long job will take to do, considered all safety aspects and special equipment needed to carry out installation or repair. c. Communicated with Clients to ensure that I know exactly what the client wanted done and made suggestions on how to do work in the Fastest, Safest and most Cost Efficient way. d. Also informed New and Existing Clients on what services and products we could provide them. e. Assisted Store Personnel at times when high volume of equipment was received from Suppliers and booked out to Clients. f. Did Quality Control Inspections on items received. Made sure that items were in sealed containers that part numbers, prices and quantities corres- ponded with order placed with Suppliers. g. Did Quality Control Inspections on items being booked out to Clients. All items specially manufactured by the company was to have Job Number stamped on it, must be sealed in a container, and must be accom- panied by a test certificate where applicable, in the correct quantities. h. Did Quality Control Inspections on items being booked out to Clients. All items received from Suppliers and supplied directly to Clients, were checked against the Clients Order to make sure that correct items, quantities and pricing were received. I also made sure that goods such as pumps, motors, valves and cylinders had test certificates supplied by the Main Supplier. Furthermore, I made certain that all threaded parts were protected. i. I followed up on orders and late deliveries and communicated with Client i.c.w. expected arrival date etc. j. Wrote official failure reports to Suppliers if goods supplied did not conform to standard of quality. k. Attended meetings at Distributors to keep up with latest equipment and procedures. l. Where items could not be obtained from local Distributors, I went on the internet to source goods from other Distributors, both in South Africa and Overseas. m. Sent enquiries to various Distributors / Suppliers to obtain the best Prices and Contracts.

Please Note.
1. All certificates and proof of training mentioned in this C.V. is available on interview.
2. Remuneration will be discussed during interview.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1474)

Go to Search Parameters...

Brief Description

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Machinist- licenced

COATING INSPECTOR CV

Instrument Supervisor

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Turbine tech.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Experienced Floorhand/Roughneck

I wish to work in a challanging environment of the oil industry

Attorney and Landman with excellent tract record of acquiring Oil and Gas Leases. Over 10 years title experience, with specialized training in probate and non-probate transfers of property interests; including trusts and all matters relating to the administration of estates. Diversified experience

I’m extremely interested in obtaining a post either as Geophysicist / Geologist / Petrophysicist or any relevant position that fit my education back ground. I have outlined some working experiences and developed talent in geology (Geocience) about myself in the Resume attached for consideration

• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Senior Mechanical Draughtsman(MEP)

Asset Management Application Support

To Become employed as a Instrument Tech, Instrument Designer, or Process Operator

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

sales, marketing, business development general management

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Welder

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

Worked service rigs for 2.5 years

Instrument technician

Versatile, knowledgeable, exploration geologist

An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out