Resume - I have worked in management positions for over 15 years in both the construction...

Misco Jobs

Resume #77781

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Work for a company that can use my talents and enhance my knowledge through continued learning and growth. Increase and improve company growth through productivity in workflow improvements while at the same time increasing quality. Build a careers with a company that is willing to retain, empower and compensate employees that show a willingness to improve company and work conditions, with continued profitability because of their hard work.

WORK EXPERIENCE:
Company: LADS, Inc. Work (307) 782- 6103
General Contractors Cell (307) 679-8395
P.O. Box 130
Robertson, WY 82944
Contact: Alan Harmon CEO
Title: Foreman (July 05 – Nov 2008)
* Overseeing all building aspects including structural completion, sub contractors for plumbing, electrical, cabinet installation and flooring installation to maintain schedule and insure efficiency and quality are maintained.
* Integral part of all finishing details of project, insuring that homeowner is satisfied with final product.
* Responsible for procuring all necessary products for completion of project.

Company: Tony Divino Toyota (801) 394-5701
777 West Riverdale Road
Riverdale, UT
Contact: Russ Layton General Manager
Title: Sales Consultant (June 03 – July 05)
* Used communication skills in the initial contact with customers, to defuse tension and create a positive environment.
* Maintained and exceeded a quota of sales each month.

Company: LADS, Inc. Work (307) 782- 6103
General Contractors Cell (307) 679-8395
P.O. Box 130
Robertson, WY 82944
Contact: Alan Harmon CEO
Title: Laborer (August 01 – May 03)
* Worked in areas of construction including concrete pouring and finishing, structural framing, carpentry finishes, tiling, installation of cabinetry, etc.
* Worked with Forman to make sure project is on schedule and quality standards are being maintained.

Company: INNERSTEP (520) 294-0781
3280 E. Hemisphere Loop Suite 140
Tucson, AZ 85706
Contact: Jorge Pozo V.P. Sales & Marketing
Title: Program/production Manager (May 99 – June 01)
* Major electronic circuit board manufacturer
* Worked with customers to insure that product was being built to specifications.
* Production employees totaling 40, under my direct supervision.
* Increased quality assurance from 75% to 96% during my tenure.
* Decreased cost of Labor 30% while increasing efficiency of workflow by 8%.
* Trained all production leads in using "on time delivery" programming so that they understood where product should be in our process at any given time, ensuring total customer satisfaction.
* 70% of our product was military based.

Company: Todd Engineering (520) 889-9333
3280 E. Hemisphere Loop Suite 154
Tucson, AZ 85706
Contact: Richard Todd President
Title: Division General Manager (Feb 84 – March 99)
* Builder of DC Power Supply and other product for RV industry
* Over 60 Employees under my direct supervision including Procurement, Accounting, Production and Quality Assurance departments.
* Worked with corporate headquarters in organizing and maintaining proper inventories to increase cash flow while still maintaining production efficiency.
* Increased production in our division from 85% to 94% efficiency.
* Traveled three weeks out of each quarter to meet with current customer base and to insure satisfaction of product line.
* Worked in sales to generate new business, increasing sales in our division from 2 million to approximately 7 million over 5 years
* Worked on floor with production employees to understand their daily routine and find out how the production line could become more efficient, making sure that employees had all the tools necessary to complete there work in an efficient and qualitative way.

EDUCATION
* (1987-1993) 3 years of college completed University of Arizona
* Business Management University of Phoenix

INTERESTS
Family, religion, basketball, management, carpentry, concrete work, tile work

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1474)

Go to Search Parameters...

Brief Description

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

Finished trade as Heavy Diesel Mechanic August 2009 work on heavy earthmoving equipment for 3 years as well as Air Start Underground equipment for 5 months at Rio Tinto Site. Six month work as Breakdown Fitter at a Rio Tinto site Australia for contracting company.

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

Experience in maintenance & condition monitoring of rotating machinery. I am totally at ease with Condition Monitoring Software packages and have the advantage of knowing Microsoft Office (WinWord, Access, Excel & PowerPoint). I am also fully conversant with SAP system.

17 years in Supply Chain Management

I'm posting my resume looking for work in Canada or offshore drilling or a Mining job in Calgary or British Columbia

MIG) Gas Metal Arc Welding, (TIG) Gas Tungsten Arc Welding, (SMAW) Shielded Metal Arc Welding “Stick”, OXY-ACETALENE Welding and cutting. I have also been trained in Pipe Welding, and have an extensive knowledge of Ferrous and Non-Ferrous metals along with numerous skills in metal fabrication.

over 14 years of Quality Control and Assurance within the Construction and Facilities Maintenance field. Providing leadership and Quality Control in a variety of New and or expanding projects ranging from military and civilian aircraft runways, slip form, facilities maintenance, and industrial plant

diesel engine mechanic, rig mechanic , generator mechanic

I have twelve years of operations experience in the petrochemical industry as an Operation specialist(DCS,Field)specialising in plant operations for Ethylene plants (Naphtha and gas cracker units.

PhD in geochemistry, experience in trace and major elements, radiogenic Isotopes (Sr-Nd-Rb-Sm-Pb-Hf) and U-series isotopes. My research focused on the application of short-lived, U-series isotopic disequilibria to constrain, the time scales of magma formation, transport and differentiation.

25 years mining and heavy industrial , power generation,technical trainer,maintenaince supervision superintendent roles, 6 years expat work in 4 countrys ,extensive exposure to MARC's and dealer systems,all mining equipment covered diesel and electric

Been it the welding trade for three years

I am PhD in Geotechnical Engineering from Japan.

Over twenty years experience in tuning and repairing automated systems, proficient in problem solving and continuous improvement, focus on strategies to improve safety systems performance, resourceful in locating, storing and disseminating knowledge

I am Professional Logistician (CITT), Certified Purchaser and Journeyman, H/D-Partsman (automotive and mining equipment-including underground) and Warehouseman.

I have got 19 years experince in pumps and valves .

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

Experienced HSE professional

OHST - Health, Safety & Environmental - HSE

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

Dear Sir / Madam,

Field Service Engineer

Information / Documentation Data Manager; Hiring and training of internal /external staff vendors for collaboration software system. Updating collaboration systems. Design Title blocks / numbering system. Work contractual assignment (projects) start of life cycle to finish of Handover to Client

Highly qualified in security, safety and rescue work, a lot of experience in helicopter rescue, work and training camp experiences, military education, calm, reliableand flexible

Qualified Boilermaker, Current Bluecard, Worsley inducted, MC License, Confined spaces trained, Currently studying Cert 4 in OH&S

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

Petroleum Engineer with Field onshore offshore experience. Experience in field operations and wellsite operations. Working in reservoir management and well testing.

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Construction / mining / environmental

Skilled welder with 10 years experience. Able to weld mig, arc, flux core. Have used manual, semi-automatic, automatic and portable welding machines. Also albe to operate heavy equipment.

I have over 20 years International Electrical/Instrumentation/Control Systems Construction and Commissioning Experience as Supervisor, Superintendent, and Managerial positions.

Inspector / Quality Control - API 510 & AWS CWI certified Over 27 years professional inspection experience in the petroleum refining, chemical process and electrical power generation industries .

Area of expertise includes: Office Management, Project/Staff Management, Training and Development, Budget Management, Procurement Management, Planning and Execution Skills, Secretaria/Confidential Services, Document Management, Coordination/liason, Team Building & Team Management, Logistics and Tran

Rotational Equipment, Power Infrastructure E&I, O&M, & International ISO Quality and Safety Systems

AT PRESENT I WORKING IN DUBAI ELECTRICITY AND WATER AUTHORITY ( DUBAI GOVERNMENT SECTOR) AS A ELECTRICAL SUPERVISOR . I HAVE 11 YEARS EXPERIENCE IN INSTALLATION & MAINTENANCE OF ELECTRICAL WORK ,CONTROL & MONITORING CONTROL OF CONTRACTORS WORK.

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I'm looking for a long term career. I am used to labouring and I'm a quick learner. I have previous experience in the oilfield swamping and lease cleanups. I want to start work as soon as possible. I will be a definite asset to your company and will do my best in everything that I do.

Multi tasked in the construction filed. SAP 4.6, Lotus Notes, Act, JD Edwards, Microsoft, Access, Material handler, Tool-Room, A/P & A/R, Procurment, Human Rescources duties

S.S.LC. From Board of Kerala

If you are looking for a dedicated, hardworking, honest, dependable employee who can think “Out Side the Box”, see further into the future than the end of his nose and is a dedicated team player - your search may be over.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out