Resume - Welding Inspector/ Qa Qc Inspector

Misco Jobs

Resume #78249

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

* BGAS/CSWIP Welding Inspector (BGAS No. 577215)
* APPOINTED FIRST AIDERƒn

SAFETY TRAINING

* BOSIET Offshore Survival/Fire fighting.
* UKOOA Full Medical Certificate

PROFILE

Excellent experience gained in a variety of demanding environments. Experience includes but not limited to - Onshore/offshore pipelines. Block and check valve installation.. Lay and spool barges and installations. Comprehensive working knowledge of International codes and standards. Highly motivated, flexible and adaptable to any work environment.

WORK EXPERIENCE

LLOYDS REGISTER, ALGERIA, SAIPEM S7000 & CASTORO SEI, OCTOBER 08

Client Rep for Lloyds Register on board the Saipem S7000 during deepwater J lay of various diameter sub sea pipelines. Then onboard the Castoro Sei (C6) during S lay of sub sea pipelines. Duties included but not limited to ensuring that all procedures and specifications where adhered to at all times by the contractor during the welding, double joint, blasting, coating and NDT operations, completing all QA/QC documentation and filing.
Also ensuring that all safety procedures were strictly adhered to.

Agip KCO, KAZAHKSTAN, CASTORO 12, APRIL 07 TO DECEMBER 07

Client Q.C, Laying a 28" Sour gas pipeline in the Caspian Sea.
Duties included, ensuring all procedures and specifications where adhered to at all times, and completing all QA/QC documentation and filing.

BP GREATER PLUTONIO PROJECT, BLOCK 18, ANGOLA, JAN 07 to MARCH 07.
Client QC for Acergy overseeing the sub- contractor, Sotrraplex. Ensuring all work was carried out to procedure and specification, including but not limited to welding, coating, blasting, painting and dimensional control of the ILT's. Ensuring all paper work was in place for the final as built documentation.

AGIP KCO, CASTORO 12, KHAZAKSTAN. JULY 06 to OCTOBER 06
Client Q.C Inspector, Laying an 18" Carbon steel pipeline in the Caspian Sea.
Duties included but not limited to welder qualification, and inspection of welds both front and back end. Monitoring and enforcing all HSE plans and policies to ensure construction activities are conducted in a safe and acceptable manner. Ensure all construction work is in accordance with the approved drawings, specifications, Standards and procedures.
Manage any and all inspections on contractor vessels by third parties and authorities.

LLOYDS REGISTER, FPSO SHIEHALLION, NORTH SEA. APRIL 06 to JUNE 06
Client Rep for Lloyds Register on board the BP FPSO Shiehallion doing a CUI (Corrosion under Insulation survey). Responsible for overseeing the contractor stripping and inspecting all carbon steel pipe work to evaluate the need for repairs, updating spreadsheets to allow the contractor to go directly to all repair sites with ease, working with P&ID,s and Isometrics.

TOTAL FINA ELF (DOLPHIN ENERGY) DEC 05 to MARCH 06
Q.C Inspector on the Mainline and Double Joint aboard the Castoro Sei. 350km of 48"sub sea export pipeline. Ensuring all procedures and specifications were adhered to at all times, completing all QA/QC documentation and filing

.
STOLT OFFSHORE AUG 05 to OCT 05
Client Rep for Stolt Offshore ensuring that procedures were adhered to at all times, and all relevant documentation was filed.
Overseeing all procedure qualifications, welder qualifications, consumables certificates, system calibrations and daily progress reports to Paris
.
SHELL JUL 05 to AUG 05
Client Rep, Combined execution of the cutter and K-17 gas development pipeline. Laying a 16" line with a 2" piggyback line.
.
BP Rhum Project MAR 05 to JUL 05
Client Rep for BP on board the Castoro Sei Laybarge on the BP Rhum Project doing a pipe in pipe lay to the BP Bruce platform, occasional trips to the Bruce platform to do the riser tie ins, duties including but not limited to ensuring adherence to all specifications and standards, third party witness to welder qualifications, internal camera inspection with laser defect finding for the root pass, monitoring both front end and back end main line welding, comprehensive report writing on a daily basis, ASA Safety audits on a regular basis
.
STOLT OFFSHORE JAN 05 to MAR 05
Welding Inspector on board the Laybarge LB200, duties including but not limited to, double joint and main line welding inspection, welder qualifications for both main line (Saturnax) and double joints ( Sub Arc )

AMEC - BP BRUCE PLATFORM. DEC 04 to JAN 05
Welding Inspector for Amec Construction installing a 30" duplex line on the CR platform, duties included but not limited to, adherence to all procedures and specifications, attended daily progress meeting with the offshore installation engineer to ensure welds were to specification
.
AGIP GAS BV, LIBYA AUG 04 to SEP 04
Rep for Saipem on board the Castoro Sei (C6) laying a 22" pipe in pipe off the coast of Libya, duties included but not limited to, internal camera root pass interpretation, utilising ground breaking technology to measure defects by way of laser and defect guidelines to ensure all welds were within the specifications
.
.
STOLT OFFSHORE NOV 03 to APR 04
Sanha Condensate Project-Angola
Q.C Inspector for Chevron/Texaco on the East Kocongo platform offshore Angola, over seeing the contractor, Stolt Offshore, doing the installation of a compression module. and associated risers, duties included but not limited to welder qualification and adherence to all Chevron specifications, at completion a punch list was established to ensure 100% compliance.
I also spent two weeks on the dive support vessel Seaway Discovery ensuring all specifications were adhered to for the sub sea riser and spool installation
.
CABGOC SANHA PROJECT - ANGOLA SEPT 03 to NOV 03
Q.C. Inspector
Q.C. for Stolt Offshore during launching and installation of 3000 ton DPP jacket from Seaway Polaris, and subsequent completion of sub sea pipelines for Chevron Texaco. Supervised SMAW and automatic welder qualification programme for jacket and pipeline welding,.. Ensured compliance to all Chevron procedures and specifications...
Also running umbilical lines alongside pipelines.

SHELL BONGA PROJECT ¡V NIGERIA MAY 03 to AUG 03
Q.C. Inspector
Q.C. for the contractor, Stolt Offshore, onboard Seaway Polaris during conventional S lay and deepwater J lay of various diameter sub sea pipelines. Witnessed pipe lay welder qualification. Co-ordinated all welding and NDT operations reviewing associated reports. Carried out daily weld audits to ensure compliance to procedures
.
O.P.S. ¡V ALABAMA U.S.A. MAR 03 to MAY 03
Q.C. Inspector
Fabrication of 8" risers at the Theodore spool base in Alabama for Chevron/ Total/ Fina/ Elf. Criticality of specification required fully documented surveillance at all stages from fit up to completion of welding, including 18 point fit up checks and parameter checks of all weld passes. Scheduled NDT and PWHT operation..

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1484)

Go to Search Parameters...

Brief Description

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

Heavy Equipment Operator

Radio Operator Offshore

Welding Inspector/ Qa Qc Inspector

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Well testing Senior Operator.

Rig mechanic, rig technician

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

Oil/gas/water/wastewater electrical

Industrial Electrician/Instrumentation Technician with Linesman training

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Hydrocarbon Exploration and Development

Precision Drilling since Feb 2002, various knowledge in drilling different kinds of wells as well as downhole tools. I posses a excellent safety record. I have the ability to learn new jobs very quickly and throughly.

Regional Senior Account and Sales Manager with 9 years accomplished career track throughout the industry delivering and sustaining revenue and profit gains within highly competitive South East Asia Market. Exceptional communicator with a consultative sales style, strong negotiating skills, exception

Safety Engineer

E&I QA/QC Inspector, Certified QMS Lead Auditor, Having Oil&Gas onshore and offshore experience

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

Certified Rigger, Welder helper, and Forklift driver.

Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.

Critical Care Paramedic

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Instrument supervisor / technician v exp construction commissioning start up HSE

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Employment history with over 15+ years oil and gas exploration experience.

Field Machinist/Millwright

NDT Inspector-oilfield equipment

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Electrician - Construction

Experienced trainee driller, compitent derrickman, expiernced floorhand and roustabout with strong workover experience.

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out