Resume - Title research, Mineral Ownership reports, Limited title abstracting, Lease nego...

Misco Jobs

Resume #78290

CONTACT INFORMATION:
View contact information...

Work Experience

March 2008 – present Self-employed Petroleum Landman

I was employed as an Petroleum Landman in an independent contractor capacity.. My duties included pre-lease clearance, draft clearance, leasing, preparing title spread sheets, mineral ownership reports and performing due diligence on existing leasehold drill sites. All of this experience was in the Barnett shale.
I am experienced with MsWord, Excel and Deed Plotter.

Work Experience

January 2003 – February 2008 Kimball Hill Homes
3010 LBJ Freeway
Suite 1100
Dallas, Texas 75234

QA Inspector

I inspected residential construction beginning with foundation thru completion to insure that all ongoing construction complied with local building codes and safety regulations. This required a solid working knowledge of building codes and OSHA safety standards. For the most part I performed inspections at the same stages of construction that most municipalities would perform their inspections. Such as foundation, frame, plumbing top out, electrical and HVAC rough, trim out, and final inspection prior to obtaining a certificate of occupancy

August 2001 – November 2002 Vintage Homes/Mercedes Homes
11494 Luna Road
Suite 201
Dallas, TX 75234

Construction Manager

Manage and supervised the construction of custom homes ranging in price from $300,000 to $600,000. My main duties were to supervise construction at all stages. Vintage is a new division of Mercedes Homes specializing only in high end homes. I was responsible for establishing a vendor base that complied with pre-set budget guidelines, dealing directly with home buyers, and vendors providing services and/or materials. I performed all of the scheduling of trades and materials as needed to get each home completed in a timely fashion and within budget guidelines. I also monitored each home to insure that all of the required functions were completed as per quality guidelines, and in full compliance with the current building codes.

March 2000 – July 2001 Lennar Homes of Texas
Construction Manager
12720 Hillcrest Road
Dallas, TX 75230
Construction Manager

I supervised the construction of new residential properties from approximately 3,200 – 4,500
square feet in area with a starting price range of approximately $180,000. My duties begin with grading and site preparation of the building lot through completion of the finished home. It was my responsibility to schedule all of the required trades in a timely fashion so as to stay on a pre-determined schedule for completion of each home on time and within budget guidelines. My workload could be as few as two homes, and up to as many as 18 homes simultaneously. The key factors to performing this job are establishing strong communication with all of the trades and sub-contractors, and having above average abilities in setting and maintaining efficient scheduling. It was not uncommon for my homes to be completed in 65 – 80% of the time allotted.

May 1999 – March 2000 City of Lewisville
Building Inspection Division
1197 West Main Street
Building Inspector Lewisville, TX 75029

Inspection of new residential and commercial construction taking place within the corporate boundaries of the city of Lewisville, TX. This also included improvements made to existing structures. The inspection process included all stages of construction from foundation through completion and issuance of a certificate of occupancy. The primary focus was to insure that all construction conformed to the guidelines of the city, and followed the minimum construction standards as set forth in the Universal Building Code.

June 1997 – April 1999 Cencor
5252 Cherokee Avenue
Suite 100
Alexandria, VA 22312

Regional Quality Assurance Analyst (temporary position)

I began my employment with this firm as one of approximately thirty QA Analysts stationed throughout the United States tasked with monitoring offices of the Immigration & Naturalization Service. I was stationed at the Central Region INS headquarters in Dallas to perform bi-weekly QA audits of the Dallas District office documentation flow. Through my efforts, problem areas were identified, and suggestions made that helped this office successfully pass an audit by the accounting firm of KPMG that they had failed the previous year. I was then promoted to one of three Regional Quality Assurance Analyst positions. I then began conducting no-notice audits at INS offices throughout the central and western United States duplicating my efforts at the Dallas District office. In addition, it was my duty to compile the observations and suggestions of 8 – 10 analysts throughout the central Region and prepare bi-weekly reports of findings to the Department of Justice in Washington, D.C. During this time I used all of the different software programs in the Microsoft Office Suite. MsWord for reporting formats, Access for creating databases, Excell for creating analytical tools and spreadsheets, and Power Point for creating flow charts.

August 1990 - May 1997 Lacerte Software Corporation
13155 Noel Road
Suite 2200
Dallas, TX 75240

Technical Support Representative/Assistant Manager QA/Shipping Dept.

I worked in a phone technical support position. It was my job to answer technical questions from the company's software user base regarding software, computer hardware, and network problems. This position required a good working knowledge of over one hundred software products, computer operating systems such as DOS, and all versions of Windows, as well as computer network operating systems. Due to the nature of the software I supported, income tax related, I was required to have a good working knowledge of the IRS tax code, rules and regulations. The most important skill was the ability to analyze problems quickly with a limited amount of information. Then present a workable solution that helped the caller resolve their problem as quickly and efficiently as possible.
The first two years of my employment with Lacerte Software was as an Assistant Manager of the QA/Shipping Dept. I assisted in managing 5-20 personnel performing the everyday duties of the shipping dept., keeping the customer database up to date on a daily basis, maintaining all inventory levels daily, and keeping a constant QA program in place for inventory production and out-going shipments. I was also in charge of the high speed duplication equipment that was used for producing our product inventory. I developed a program for optimizing the use of this equipment during our busiest times to maintain the maximum amount of software to be duplicated and get the most use from all equipment at all times. During our busiest time of the year, November through April, we would ship out approximately 250,000 shipments with the department operating 24 hours per day, 7 days per week.

May 1980 – July 1990 Patrick E. Bailey Land Services
709 South 29th Street
Mt. Vernon, IL 62864

Owner of Business

I owned and operated a diversified land services business, which provided real estate title research services for independent oil & gas producers. I also prepared curative land title documentation as prescribed by land title examining attorneys. I negotiated oil & gas lease terms and conditions as well as compensation agreements for the land owners that would be affected by oil & gas exploration. One of the biggest projects I worked on was for the estate of an Independent Oil Producer in Southern Illinois. At the time of the owners death, he operated approximately 500 producing wells. This individual was named Wildcatter of the year several times by the Illinois Oil & Gas Association. My job was to prepare deeds and assignments for the wife and five children covering producing and non-producing royalty in 21 states and Canada, splitting the interest as per the decedents will. The spouse received 83%, and the five children split 17%. So the documentation was quite extensive. My work was under the supervision of Attorney Craig R. Hedin who I would also use as a personal and professional reference. Overall, the majority of my time working as a Landman was spent performing title research and title opinion documentation.

In addition, I performed residential appraisals for Boatmen's Bank of Mt.Vernon, IL. This bank is now a branch of Bank of America. And I provided residential inspections for a corporate re-location service. During the last two years this business was in operation I returned to college full-time and received my Associates degree in Business Management.

Education

Southwestern Assemblies of God University
Waxahachie, TX 75465
1998
12 Semester Hours
Major: Real Estate Inspection courses
GPA: 3.0 out of 4.00

Rend Lake College
Ina, IL 62846
A.S. 1989
70+ Semester Hours
Major: Business Management
GPA: 3.0 out of 4.0

Mt. Vernon Township High School
Mt. Vernon, IL 62864
High School, 1972
Major: General Studies
GPA: 3.00 out 4:00

Job-Related Training Courses

I completed two one-week training sessions in quality assurance for the U.S. Immigration and Naturalization Service at the U.S. Department of Justice, Washington, D.C. during 1997 and 1998.

During 1997 through 1998 I completed the necessary course work to take the Texas Real Estate Inspectors licensing exam and successfully completed same.

During my employment at Lacerte Software Corporation, I performed extensive software and computer hardware testing. The software testing was primarily in ensuring that tax forms were recreated as per the taxing authority specifications, and that tax calculations were performed correctly, and followed the tax code exactly.

JOB-RELATED CERTIFICATES AND LICENSES:

Current Texas Real Estate Inspectors License #4329.
Current Texas Technician license from the Structural Pest Control Board, #318-50-1076

I completed training through the Building Professional Institute at the University of Texas at
Arlington, TX for Foundation & Framing Field Inspection, and Concrete Inspection during
January of 2000.

I completed a 10 hour OSHA course in Safety and Health Standards for the Construction
Industry during October 2000.

While employed with CENCOR, I successfully underwent a normal F.B.I security background check.

SUMMARY OF QUALIFICATIONS:
------------
Please enter brief description of your skills and qualifications. I have approximately 11 years experience as a Petroleum Landman. Due to the oil prices of the late 80's I dropped out of the profession for several years and relocated from Southern Illinois to the DFW area. I returned to working as a Landman in 2008 working with a title attorney I previously worked with in Illinois who also relocated to DFW.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1489)

Go to Search Parameters...

Brief Description

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Geologist, 17 years experience with major Oil Company in various international settings (Europe, Asia, Middle East and Africa) both as development- and exploration geologist. Analytical and flexible. Swiss national.

I have been doing Sandblasting/Painting for 18 yrs. Over the years I have become more and more skilled. I have used just about every industrial paint there is (for example) zinc, red oxides, high builds, 890, urithane, epoxies, and etc.... I have knowledge with airless

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using Monte Carlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

TIG, MIG SMAW, duel shield, drawing, ASTM, ASME codes, MIL 256-7, copper-nickel, plasma cutting

Six years in a medical lab an nine years in a petrochemical lab

Qualified Diesel Mechanic

I am an Independent Landman looking for employment in the Oil & Gas Industry. I have approximately 10 years experience in Mineral Title Search and negotiating leases, Due Diligence and Curative of Title among other aspects of this business.

Sr. Petroleum Geologist, 27 years experience, production & exploration expertise.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Graduate Chemical engineer with experience in process control and instrumentation in Petroleum, Nuclear and Power industries. Worked on DMC and SPC advanced control strategies. Computer software skills.

Oil and Gas driller, previous owner of water well drilling company

Electrical technician, Industrial Technician, Instrument Technician, HIgh Voltage Terminator & splicer

painting and insulation supervisor/manager

I have about 15 yesr exsperience in the gas industry and 5 years in the oil field industry.I am currently a oil field gas inspector, and I also was a gas inspector for Public Safety New Brunswick

Diploma in Mechanical Engineering. With 1st class Technical

Positions desired: Plant Services Supervisor, Platform Deck Foreman, Mechanical Supervisor

More than 14 years of actual and hands-on work experience in Electrical, Instrumentation and Control Systems in Petrochemical Plant and Oil & Gas Industries (offshore & onshore) in the field of Inspection, Field Engineering, Construction and Offshore Hook-Up & Commissioning.

Directional Driller II

QA/QC nspector i reviewed and documented all x-rays NDT/NDE inspection UT, PT, VT, M.U.T., all calibration witness all production and documented any repaires and recived all information to reopt for the customer and company every day.

Laboratory Chemist, BSc Honours Degree Chemistry,

Project Management and Processes; PRINCE2 Methodology and Processes; Microsoft Project; Microsoft SharePoint Technologies; Design and Architecture; Migration Projects (2003 to 2007); Branding and Customization (Masterpage); Site and Lists Definitions

Have worked and travelled all over the Pacific region, NZ and Australia. I have interacted and worked with a wide diversity of cultures. I am a very hard worker, I learn new skills quickly and am able to implement them accordingly. I wish to continue utilizing my skills as a Diesel Fitter,

CNC machinist, edm die sinker, wirecut operator

Canadian ticketed machinist and millwrite

Welder or tube welder . blue print . machine operator.. etc..

Offshore mechanic work any shift hyd.and some elect.

TOTAL EXPERIENCE MAIN DISCIPLINE : Above 10 Years of professional experience in Piping (Including overseas).On PDMS 7 Years. EDUCATIONAL BACKROUND 1997-1998 : Diploma in Mechanical Engineering. 1993-1994 : Secondary School Certificate. CERTIFICATES 1997-1998 : Diploma in CADD Graphics. (Autodesk CA

I have more than 9 year experience in Installations,Commissioning ,maintenance, trouble shooting of all Cathodic Protection Systems in Offshore-Onshore , Pipe Line ,Oil and Gas Industries, Refineries, Petrochemical Plants,MarineJettys. And excelent Experience in DCVG (2200Km),CIP(1600Km) Surveys .

Free! I am a management professional with 28+ years of extensive experience in the O & G industry. I’ve supervised under balance drilling operations, directional drilling and vertical well applications. I’m well versed with latest drilling techniques, parameters, policies and procedures.

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Supervisor with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills, can drive change and motivate individuals to enhance company performa

My skills include, but are not limited to diesel engine rebuilding,hydraulic equipment repair and modification, troubleshooting and repair. Drilling equipment, cranes, forklifts and are some I have experience with. Mechanical equipment includes Cat engines, Drawworks, Mud Pumps, TDS9S, TDS11S.

Hardworking and dependable mechanic

I have 13 years experience in the oil and gas industry in Alberta, Canada, drilling natural gas with Champion Drilling. For the past 6 years I have been a driller, supervising a 5 man rig crew. I am loyal and extremely hardworking.

Senoir Fabrication Supervisor for piping on Operation Department from Gulf Specialized Mechanical & Engineering Service Co. L.L.C.For this moment of my job I am started work to checked iso.drawings on conformity with P&ID and notify all descrepancy and inform Field Eng.Department

Maintain a safe workplace. Effectively resolve problems. Expedite the achievement of company projects (procedures & specifications). Ability to think critically as situations develop & change. H2S/HUET/firefighting offshore/certified crane licenses. CPR. Current passport

I have EIGHT (08) YEARS EXPERIENCE: In oil/gas Drilling Company (ENTP), and DALMA ENERGY Algeria as Rig Chief Electrician, in Algeria Field.

* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.

International Logistics Business Executive - Trilingual

Wellsite supervisor for 5+ years with 10+ years prior service rig experience

crane inspector, technician, project manager, special projects coordinator

To apply my skills and training as a Heavy Duty Mechanic. I am a forth period apprentice and have experience with the repair and servicing of hydraulics, gaseous compression systems. And fluid pumping systems, coil tubing units, diesel engine repairs, and tractor/trailer repairs.

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

Planner/Coordinator

Seismic Interpreter(M.Sc. Degree) with extensive experience in exploration with carbonates and basalts. Involved in planning 2D/3D surveys, wells, mapping seismic data, integrating different data sets to derive a sound geological model and technical evaluation of new acreages for bidding.

Title research, Mineral Ownership reports, Limited title abstracting, Lease negotiation, Run sheet, Pre-lease clearance, Draft clearance, Due diligence, Land damage negotiation and settlement, Extensive curative documentation preparation

Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industries as Lab Technician, Chemist, Operator. Last 9 years working as a Marine Surveyor (Petroleum Inspector) at Kuwait. Can Run & set independent Lab for Petroleum Products. Liecenced driver with ISO Quality system knowhow

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out