Resume - Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acce...

Misco Jobs

Resume #78837

CONTACT INFORMATION:
View contact information...

Career Objective
To become a part of a growing and respectable company that has stability and advancement opportunities where I can expand my knowledge and skill sets.
Education
Associates of Applied Science GPA=3.85 out of 4.0 graduated from I.T.T. Technical Institute
Major in Electrical Engineering
CCNA Networking Associate Certification

Experience
2007 – current Texas Instruments Stafford, Texas
Repair and Maintenance Technician Prober and Tester support

* Isolate, troubleshoot and repair multiple tester platforms, which include Teradyne, Polaris, LTX Fusion, and various other customer test platforms.
* Run diagnostics and electrical fault isolation
* Board replacement
* Power Supply adjustment and replacements
* Support the test floor and maintain tool utilization at 98%.
* Interface with customers and engineers to provide increased quality and dependability on any all tester platforms.
* Maintain and order spare parts if needed.
* Troubleshoot PCB's to the component level and repair as needed to maintain tester utilization and reduce downtime.
* Access and usage of Unix and Linux operating systems.
* Extensive ISO 9000 training

Experience
2003 – 2007 Texas Instruments Stafford, Texas
Product Quality Analyst AEC Automotive Division

* Analyze Micro controllers. Through electrical fault isolation techniques.
* Support customer returns and improve quality through defect identification, defect reduction, defect electrical isolation, test case improvements and implementation. Drive customer returns to closure and identify root cause.
* Operation of Automated Testing Equipment: Platforms: Teradyne, Polaris, Fusion, and various other customer test platforms.
* Provide corrective action to reduce defects to improve quality and reliability.
* Provide formal status and final reports in the 8D format.
* Extensive ISO 9000 training

Experience
2000 – 2003 Texas Instruments Richardson, Texas

Plasma Test Laser Technician
* Operate Laser, VCT, VLCT and LTX Fusion series testers
* Operate under engineering conditions "Load specialty Job files etc"
* Interface with Engineering on Dispositions and minor issues with product flow
* Monitor and troubleshoot tester setups to maximize yield and minimize probe / re-probe cycle time and scrap
* Perform data analysis in performing lot disposition after processing
* Work closely with PDE and assist as I can in bin summary analysis, material scrap/dispositions and program anomalies
Experience
1999 – 2000 Texas Instruments Richardson, Texas
Wafer Fabrication Manufacture Specialist, (Photolytic)
* Work in a clean room environment
* Wafer handling protocols
* Operate photolithical equipment in production of silicon wafers utilizing precision optical equipment (electron microscopes, steppers using unix xterm interfaces and alignment machines
* Follow written and verbal procedures
* Interact with customers and suppliers within a team environment
* Troubleshoot exposure problems and make adjustments accordingly
* Identify hold lot issues; implement corrective action and direct rework as necessary

1987-1999 Texas Instruments/Raytheon McKinney, Texas

Electronic Engineer Technician AT/ET (Acceptance Test,
Environmental Test) Job grade 74
* Perform Qualification testing on deliverable/prototype products
* Provide formal documentation on testing results and events performed
* Trouble shoot malfunctioning systems and work closely with Engineering to correct issues, utilizing voltmeters, oscilloscopes and analytical software relevant to the particular system under test
* Interface with customers/suppliers within the organization
* Control work flow to meet customer demands and on time delivery
* Work with and write formal operating procedures and written operating instructions as needed in operation of systems to meet Military standards and customers needs
* Maintain and trouble shoot equipment used in the lab (Test sets, Chamber controllers, vibration controllers, circle chart recorders, meters, PC's, operating systems such as Windows NT and Unix/Solaris.
* Gather field data on systems, instrument them with accelerometers, operate them under field conditions while recording on a DAT machine, take the data and import it into a signal generator, and alter the signal as needed per customer requirements (increase or decrease DB/RMS levels) to be input through Electro Dynamic Shakers controlled by Ultra Spark workstations running on Solaris Unix and Spectral Dynamics Shaker controller software
* At times provide LAN connectivity so that the customer can interact with their units under test from home or from their workstations. Some test are very long durations, sometimes as long as 1 year (Reliability Growth and accelerated life Tests)
* Perform sound tests within a soundproof environment, recording DB levels under operational and non-operational conditions to meet customer requirements
* Provide testing recommendations to customers to meet Military standards

Special Skills
* Extensive electrical test data analysis. Able to interpret electrical functional data for electrical fault isolation.
* Power Supply functionality, adjustment, and replacement
* Good understanding of electrical circuitry and their functionality.
* Good understanding of semiconductors, their properties and fabrication methods and techniques.
* Certification of completion of Advanced Vibration Equipment Operation Administered by Environmental Test Laboratory of Texas Instruments
* Use testing and monitoring equipment as in voltmeters and oscilloscopes, signal generators (Spectral Dynamics software)
* Good written and communication skills
* Work well in a teaming environment
* Work with little or no supervision
* Control workflow to meet customer requirements
* Read drawings and schematics, follow and write formal procedures
* TQC certification (Total Quality Control)
* Basic Unix operating system usage
* Signal generation and wave form manipulation using Software made by Spectral Dynamics
* Troubleshooting skills, some component level and card to system level
* Operation of Teradyne, VCT, VLCT, LTX Fusion Probe testers
* SMS functionality
* Microsoft Word, Excel, some Access
* Operating Systems—Winnt 4.0 and up, WinME, Win2000, Win2000 server, Solaris, Linux, Unix

Honors
* Member of the Honor Society at I.T.T. Technical Institute
* Highest Honors awards

References
* Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1484)

Go to Search Parameters...

Brief Description

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible

Instrument Engineering, Fire & Gas Engineering

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

The professional profile of a physicist is one of the most varied and extensive. Physicists learn during their studies, strategies for solving problems and issues as quickly and efficiently. Following this training the physicists can work in a universal (almost) any professional area.

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Project Engineer

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

Well experienced mechanic worked on wide range of plant with good references have documents ready for work permit should you be interested let me send you my cv in browse format

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

CIPS qualified MSc MBA MCMI graduate, Oracle, negotiations, IT, tendering, software licensing

Diamond driller / Truck driver

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

maintanance,welding,supervisor,fork lift,fabrication,roustabout,

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

I have 8 years extensive Coded Welders experience in Hydr Industry. I also did a Welding Inspectors Course Level 1 in 2007. I do however not have any experience in Off Shore Ind, but I am very eager and willing to learn.

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

my resume consists on my career on my trade of electrician. I send this resume to apply the position of rig service electrician.

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

24 years in oilfiled \ Safety Rep.\ EMT

Experienced Design Engineer

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am a licensed Heavy duty mechanic trained and certified in Canada. I have extensive oil field/drilling experience. I am trained in Caterpillar natural gas compression products. I have extensive supervisory experience as well.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

Channel sales, Institutional sales, Oem sales, Business development, International sales

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out