Resume - Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC ac...

Misco Jobs

Resume #78983

CONTACT INFORMATION:
View contact information...

Employment

16/06/2008 – Present Granite International (GSI), Central Europe

I am currently hired via GSI and utilised on various GE owned businesses, predominantly Aero. I am presently assigned to Installation & Commissioning on-site training of GE's LM6000 packages with the prospect of becoming a TA for GE installations worldwide. I previously spent 6 months in GE Energy service workshops based in Rheden, The Netherlands. Though relatively new to working with the internal components I gained knowledge and experience whilst applying my skills working on all aspects of their LM6000 Gas Turbines. From time to time I also assist GE Water Technologies on their mobile water treatment purification trailers as an Operations & Maintenance Technician. As an experienced tradesman and Gas Turbine operator, I am considered for contracts with GE Energy Rentals to further provide skilled labor on both Engine Maintenance Support, and Operations & Maintenance of their TM2500 Mobile Power Plant.

01/04/2008 – 10/05/2008 NRG Global, Pakistan

Working self employed I was utilised in planned maintenance of seven General Electric LM2500 Gas Generators. Having previous experience of the site and equipment on the original installation and the operations, I was approached to assist Aero representatives in carrying out removal of engine, top casing and blade changes, as well as hot sections and nozzle changes. In between maintenance periods I was also required as an Operations and Maintenance Technician to ease pressure from longer term site staff.

13/09/2007 – 31/03/2008 Granite International (GSI), Central Europe

I was recruited predominantly to work alongside GE Aero Derivatives on European contracts. I have assisted Aero in the removal of engines (and in cases the Power Turbine) from the package for major overhaul. Re-installation & alignment, and pre commissioning of land mounted units, generally LM2500. Having an appreciation and experience of Operations and Maintenance of their TM2500 power plant as a package for GE Energy Rentals, I gained further experience solely on the LM2500 Gas Generator itself. Working to GE guidelines and procedures, fulfilling Aero FSR expectations, I now have a greater understanding of Engines and the strict mechanical work required, particularly on installs.

To become more flexible for Granite I accepted a request to attend classroom training for GE Water Technologies. I then worked on operations and maintenance within Europe on GE Mobile Water Treatment plants, providing various levels of purified water to suit client specification based upon plant requirements. I have gained further knowledge of chemistry and the direct use in water treatment. I have obtained operations and maintenance experience of mobile plant including 6 stage Filtration Systems, Reverse Osmosis, De-Aerators and DI Trailers and their effectiveness and efficiency within the water purification and treatment industry.

08/06/2007 – 03/08/2007 NRG Global, Kuwait

Installation Supervisor: Working Self Employed as PB Globetech Ltd, however sub-contracted to TC Power via NRG Global on a rotating shift basis. Working as a team member my role is to oversee and assist in a new installation of six General Electric LM6000 gas turbine units. Responsibilities include liaising with client on a daily basis regarding progress, safety concerns if applicable and relevant issues. Accountable to Project and Installation Managers I am supervising a team of ex-patriots, and local labor of up to 20 personnel.
Additionally
* Responsible for install progress and updates
* Responsible for implementing health and safety measures
* Ensuring all mechanical lift machinery are operational and available
* Progression of installation and commissioning movements
* Identification and rectification of problems

08/12/2006 – 27/05/2007 NRG Global, Pakistan

Mechanical Technician/Turbine Operator: Working Self Employed however subcontracted to General Electric Energy Rentals via NRG Global I was part of a team responsible for the installation, operation and maintenance of seven TM2500 mobile gas generators utilised on a WAPDA Power Station in Pakistan.
Additionally:
* Self motivated mechanical technician and turbine operator
* Key team member within specialist install team
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Condition monitoring of package machinery
* Contribution towards operator training of local personnel and ex patriots
* Familiar with relative local and remote HMI computer operations software
* Team empowerment and inspiration. Also able to contribute greatly on own initiative

28/04/2006 – 01/12/2006 NRG Global, South Africa

Mechanical Lead/Turbine Operator: Operating via NRG Global I was subcontracted to General Electric Energy Rentals for a period of seven months. I was responsible for the installation, operation and de-mobilisation of three TM2500 mobile gas generators based on a PetroSA Oil Refinery.
Additionally:
* Contribution towards achieving install deadlines as a key member
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Ensured effective maintenance of relative machinery
* Ensured client dispatch requirements were fulfilled
* Maintaining a very good client relationship
* Appointed leading mechanical hand relative to de-mobilisation
* Achieved record de-mobilisation target, whilst ensuring health and safety requirements were the optimum goal throughout

01/09/2004 – 23/02/2006 IPM Industries, Thornaby

Service Engineer: Employed on a permanent basis to overhaul client pumping equipment, whether on site or in the IPM workshops. When necessary I was also subcontracted out to local and national refineries, steelmakers and chemical industries. I was also utilised overseas installing and demobilising mobile power generation equipment for General Electric.
Additionally:
* Rotating equipment specialist
* Competent in maintaining heavy plant machinery and equipment
* Rotalign Pro laser alignment technician
* Maintaining good client relationship via personal conduct
* Health and safety awareness

02/04/2001 – 27/08/2004 Ceetak Engineering Ltd, Middlesbrough

Service Engineer: Employed on a permanent basis to overhaul a wide range of client pumping apparatus and rotating equipment both on site and workshop based. Responsibilities included quotations, recommendations and sourcing of spares and replacement units. Within this role I was required to assist the workshop manager and area sales engineer by taking on some of their duties on a regular basis.
Additionally:
* Rotating equipment specialist
* Optiline laser alignment technician
* Administration
* Knowledge of working in petrochemical, chemical, oil & gas and pharmaceutical industries
* Health and safety awareness o
* Management of workshop and stores

16/11/1998 – 30/03/2001 SLD Pumps Ltd, Chester le Street

Diesel Pump Fitter: Employed on a permanent basis to overhaul a range of diesel and electric driven Godwin self priming pump sets within the company fleet. Based in the central repair centre I was responsible for the repair/overhaul for a range of diesel engines, self priming pumps, compressors and vacuum pumps, as well as rectifying any chassis damage. All serviced pump sets were performance tested in house prior to release from the centre.
Additionally:
* Rotating equipment specialist
* Manufacture of 12/24v engine wiring looms
* Knowledge of Volvo, Cummings, Perkins, Ford and Lister-Petter diesel engines
* Manufacture of brackets and steelwork
* Occasional management of stores and stock levels
* Compliance with company and OEM standards

16/06/1992 – 13/11/1998 Clydesdale Forge Co, Hartlepool

Mechanical Technician: I was initially recruited as an apprentice on a permanent basis, and retained as a fully qualified Technician following completion of my apprenticeship. Responsible for repairs and maintenance of all company machinery, and ensuring all plant equipment was kept in good operating condition. I was selected to be part of a product improvement team for my mechanical input and system modification suggestions. I also set up a PC controlled routine maintenance schedule to aid prolonging component life and reducing machine downtimes.
Additionally:
* Knowledge and competency in maintaining a range of forging and stamping machinery
* Control of PC assisted routine maintenance
* Knowledge of pumps & valves, hydraulics & pneumatic systems, brake & clutch systems, cams and followers
* Enthusiastic team player

Skills

* Capable, competent, reliable and responsible
* Ability to work on own initiative or as a team member
* Methodical and able to apply fault finding techniques
* Very good communication and administration skills
* Trained alignment technician
* Computer literate
* Welding and fabrication
* Basic electrical skills
* Basic lathe skills

Education

1987 – 1992 The English Martyrs Comprehensive School, Hartlepool
(GCSE'S) Mathematics, Modular Science, Art and Design, Graphic Design, English Language,
English Literature, History, French, Religious Studies
1992 – 1993 Stockton & Billingham Technical College, Stockton
BTEC First Certificate in Engineering
1993 – 1995 Hartlepool College of Further Education, Hartlepool
BTEC National Certificate in Mechanical & Production Engineering
1995 – 1997 Hartlepool College of Further Education, Hartlepool
BTEC Higher National Certificate in Mechanical & Production Engineering

Training Courses

Jun 1993 Entra (Engineering Training Authority)
NVQ Level 1 & 2 Mechanical Maintenance Skills
Jan 1996 Clydesdale Forge Engineering Company
Slinging and Pendant Controlled Overhead Crane Driving
Oct 1996 Entra (Engineering Training Authority)
NVQ Level 3 Engineering Maintenance - Mechanical
Oct 1999 SLD Pumps Limited
Counterbalance Fork Lift Truck Operator Certificate
Sep 2001 Ceetak Engineering Limited
Glandless Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Centrifugal Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Vacuum Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Progressive Cavity & Positive Displacement Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Mechanical Seal Maintenance Competency Training
Jun 2002 Pruftechnik AG
Optiline Laser Alignment Training (Uncertified)
July 2002 AES Seal Plc
Mechanical Seal & Systems Training Course
Sep 2002 AES Seal Plc
AES Seal Correspondence Course – Bronze Award
Jun 2003 Pruftecknik AG
Vibrotech Condition Monitoring Training (Uncertified)
Sep 2004 IPM Industries – In House
Rotalign Pro Laser Alignment Training (Uncertified)
Jun 2006 General Electric – Non certificated EHS Training in accordance with GE policy (NRG)
May 2007 NRG Global – In House
Rotalign Ultra Laser Alignment Training (Uncertified)
Sep 2007 General Electric – Non certificated EHS Training in accordance with GE policy (GSI)
Nov 2007 General Electric – Non certificated mobile flow school, GE Water (GSI)

Hobbies

* Motorbikes
* Travel
* Cycling
* Running

References

* Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1484)

Go to Search Parameters...

Brief Description

EXPERIENCED FOR 13 YEARS IN OIL REFINERY

Offshore Materials & Logistics Coordinator / Controller

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

LICENCED AIRCRAFT MAINTENANCE ENGINEER

Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.

Sales, English, Detailed-oriented, Marketing, IT, Key Account

9 Yrs Experience in Oil & Gas Estimation, Civil Construction, Architectural Facades, Construction Chemicals.

Cad Operator

QA/QC Inspector, engineer

Mapping, surveying, mudlogging, excel, word, geothermal

Currently completing the final year for the degree, Masters in Petroleum Well Engineering. Expected graduation February 2006

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

Electrical Eng./Supervisor - Power Plant

QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

Finished trade as Heavy Diesel Mechanic August 2009 work on heavy earthmoving equipment for 3 years as well as Air Start Underground equipment for 5 months at Rio Tinto Site. Six month work as Breakdown Fitter at a Rio Tinto site Australia for contracting company.

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

Experience in maintenance & condition monitoring of rotating machinery. I am totally at ease with Condition Monitoring Software packages and have the advantage of knowing Microsoft Office (WinWord, Access, Excel & PowerPoint). I am also fully conversant with SAP system.

17 years in Supply Chain Management

I'm posting my resume looking for work in Canada or offshore drilling or a Mining job in Calgary or British Columbia

MIG) Gas Metal Arc Welding, (TIG) Gas Tungsten Arc Welding, (SMAW) Shielded Metal Arc Welding “Stick”, OXY-ACETALENE Welding and cutting. I have also been trained in Pipe Welding, and have an extensive knowledge of Ferrous and Non-Ferrous metals along with numerous skills in metal fabrication.

over 14 years of Quality Control and Assurance within the Construction and Facilities Maintenance field. Providing leadership and Quality Control in a variety of New and or expanding projects ranging from military and civilian aircraft runways, slip form, facilities maintenance, and industrial plant

diesel engine mechanic, rig mechanic , generator mechanic

I have twelve years of operations experience in the petrochemical industry as an Operation specialist(DCS,Field)specialising in plant operations for Ethylene plants (Naphtha and gas cracker units.

PhD in geochemistry, experience in trace and major elements, radiogenic Isotopes (Sr-Nd-Rb-Sm-Pb-Hf) and U-series isotopes. My research focused on the application of short-lived, U-series isotopic disequilibria to constrain, the time scales of magma formation, transport and differentiation.

25 years mining and heavy industrial , power generation,technical trainer,maintenaince supervision superintendent roles, 6 years expat work in 4 countrys ,extensive exposure to MARC's and dealer systems,all mining equipment covered diesel and electric

Been it the welding trade for three years

I am Professional Logistician (CITT), Certified Purchaser and Journeyman, H/D-Partsman (automotive and mining equipment-including underground) and Warehouseman.

I have got 19 years experince in pumps and valves .

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

Experienced HSE professional

OHST - Health, Safety & Environmental - HSE

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

Dear Sir / Madam,

Field Service Engineer

Information / Documentation Data Manager; Hiring and training of internal /external staff vendors for collaboration software system. Updating collaboration systems. Design Title blocks / numbering system. Work contractual assignment (projects) start of life cycle to finish of Handover to Client

Highly qualified in security, safety and rescue work, a lot of experience in helicopter rescue, work and training camp experiences, military education, calm, reliableand flexible

Qualified Boilermaker, Current Bluecard, Worsley inducted, MC License, Confined spaces trained, Currently studying Cert 4 in OH&S

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

Petroleum Engineer with Field onshore offshore experience. Experience in field operations and wellsite operations. Working in reservoir management and well testing.

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Construction / mining / environmental

Skilled welder with 10 years experience. Able to weld mig, arc, flux core. Have used manual, semi-automatic, automatic and portable welding machines. Also albe to operate heavy equipment.

I have over 20 years International Electrical/Instrumentation/Control Systems Construction and Commissioning Experience as Supervisor, Superintendent, and Managerial positions.

Inspector / Quality Control - API 510 & AWS CWI certified Over 27 years professional inspection experience in the petroleum refining, chemical process and electrical power generation industries .

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out