Resume - Industrial Electrician/Instrumentation Technician with Linesman training

Misco Jobs

Resume #79771

CONTACT INFORMATION:
View contact information...

EDUCATION:

Sept. 1993-April 1994
1st Year Technology(Instrumentation Technology option)
Labrador College
Labrador City, NL

July 1993
Math Skills Enabling Program
Labrador College
Labrador City, NL

Sept. 1986-June 1987
Electrical Practice Program(Marine,Industrial,Construction)
Marine Institute
St. John's, NL

Sept. 1985-June 1986
Grade 12
J. R. Smallwood Collegiate
Wabush, NF

EXPERIENCE:

Wabush Mines (Sept. 1997-Present)
Wabush, NL
Position: Industrial Electrician/Instrumentation Technician

Duties: Maintain, troubleshoot and repair all plant and mine equipment.
Install and maintain 5/20 PLC's, multilin relays, Ground Fault monitor systems. Worked on overhead cranes, elevators, 240 Ton Unit Rig and Komatsu Trucks, 45RIII Bucyrus& P & H 120 drills, 170 Ton Euclid Trucks,L1850 & L1400 Letourneau loaders, Hi-voltage switching up to 46Kv. Also worked on dewatering installation and repair, switch house modification and repair, locomotives, and 295B B&E shovel rebuilds and maintenance. Komatsu 5500 Diesel/Electric Shovel assembly maintenance and repair.

CFLCO(June 1997-Sept. 1997)
Churchill Falls, Labrador
Position: Industrial Electrician

Duties: Maintenance, troubleshooting and repair at Churchill Falls
Power Generating Station. Worked on 500 Mwatt Generator and all associated controls. Included Line Truck Operation,
Hi-Voltage Isolation and Switching, Dobble Testing, and
Emergency Backup Systems. Worked in main switchyard, Main
Underground Generating Station, and townsite work.

Smoky River Coal Limited(Oct. 1996-May 1997)
Grande Cache, AB
Position: Electrician

Duties: Troubleshooting, repair and maintenance of underground equipment including Dosco and Joy Miners, shuttlecars, Stamler feeders, belting controls, SF86 switches and transformers.
Worked on 600v and 1100v systems. Worked on installing new long-
Airdox Longwall mining system. PLC work.

Wabush Mines (June 1996-Oct. 1996)
Wabush NL
Position: Industrial Electrician

Duties:
1) Motor Shop Service. Bearing changes, overhead crane and elevator repair and maintenance. Motor and generator repair and maintenance.
2) Mine. Troubleshooting and repair of 240 Ton Unit Rig, 170 Ton Euclid & Cat trucks. Also Locomotives, 49 R3 Bucyrus Erie and 45R Rotary
Drills, 190B Bucyrus Erie & P&H 2100 Shovels, Letourneau
L1400 & L1850 Front End Loaders and Dewatering. Multilin relays. PLC work.
3) Linesman. Transformer overhauls, Grounding, High Voltage
Switching, Pole drops.

Anvil Range Mining (April 1996-June 1996)
Faro, Yukon Terr.
Position: Electrician

Duties: Running repair electrician troubleshooting and repair of all mine equipment including shops, dewatering, and high voltage switching. Repairs to 170 T Euclids, 120 T Wabcos, 170 T Unit
Rigs, P & H 2100 Shovels, 45 R Drills, Letourneau L1100
Loaders and other production equipment.

Labrador Rewinding (Dec. 1994-March 1996)
Wabush, NL
Position: Electrician/Motor Rewinder

Duties: Troubleshooting and repair of AC and DC motors, transformers, generators and related control circuits. AC and DC motor rewinding, shop maintenance and field service.

Sunshine Electrical Inc. ( Sept. 1994-Jan. 1995)
Wabush, NL
Position: Electrician(construction,residential,industrial)

Duties: Industrial and construction troubleshooting, maintenance and repair. Duties included motor controls, residential and industrial services and wiring, project planning and blueprint reading.

XeroX Canada Ltd. (April 1994-Dec. 1994)
Labrador City, NL
Position: Service Technician
Duties: Electronic and electro-mechanical repair of Xerox copies, fax laser printers, and memowriters. Also maintenance and troubleshooting of other office equipment. Experience in working with the public.

Wabush Mines (May 1989-Jan. 1992)
Wabush, NL
Position: Industrial Electrician
Duties: Worked as an electrician in various parts of Plant. Received
Electrical Apprenticeship that included comprehensive training with Industrial Electricians with 32 - 36 hours per week on hands work, and 4 - 8 hours per week of classroom training. An exam to upgrade every six months with 75 percent and higher to pass.
Mill work, Mine (trucks, shovels, drills, dewatering, high voltage switching). PLC work.

Wabush Mines (June 1988-Nov. 1988)
Wabush, NL
Position: Maintenance Mechanic Helper

Duties: Assisted Millwrights in the following parts of the Plant: Mill,
Crusher, pump bay, conveyors, loadout and dryer.

Previous work experience available upon request.

SPECIAL TRAINING
-Frequency Drive training
-Elevator and Overhead Crane Training
-B.E. 295 B Shovel Training
-Unit Rig/Terex MT-4400 Training
-B.E. 45R3 & P & H120 Drill Training
-PLC 5/20 & 5/40, SLC 150 Allen Bradley Training
-Plant Switching High Voltage Training to 161 kV (High Red)
-Red Lock-out Training and Ticket
-Series 8000 Radio Remote Control Training
-Amplidyne Control System Training - 190B Shovels
-P & H 2100 Shovel Course
-Hilti Gun Training DX450, AX45
-Fire Training
-WHMIS Training
-AutoCad 3.1
-Stanford Grounding and Bonding course
-Slinging and Rigging Course(Dec. 2002)
-Fall Arrest and Genie Boom Training

CERTIFICATES:
-Avtron ADD-32 Enhanced Maint & Troubleshooting (May 2003)
-Wabush Mines Apprenticeship Certificate
-Inter Provincial Red Seal Ticket Industrial Electrician
-Qualification Certificate
-CPR Training & First Aid Training(current to March 2009)
-Electrical Maintenance & Industrial Electronics - TPC Training Systems
-Basic Linemans training course(Oct. 2005)
-Statex 11&111 Control System Training - Euclid Trucks/Unit Rig trucks
-DC Electrical Systems - Electric Mining Shovels
-Xerox copier and fax Certificates
-PLC5 Troubleshooting Course(Nov. 2002)
-Class 9 Air Brake endorsement drivers license
-Komatsu GE Electrical Training(Dec.2006)
-P&H Electrical 650 (April 2002)

SPECIAL SKILLS:
-Oxy- acetelene welding/cutting
-Silphose welding
-Horizontal vertical Milling
-VPIP (Resin pressure treatment) training
-GPS Training

REFERENCES: Available on request.

Dear Sir/Madame:

I would like to apply for the position of Electrician. I feel my education, experience, and career interests are well suited for this position.

As an Industrial Electrician, I have gained skills and applied these skills in a safe and effective manner. I feel I have effective problem solving ability and analysis skills to find solutions needed for troubleshooting in the current workplace. I am also qualified by NF Government standards to write the Industrial Millwright Certification exam based on trade experience and hours worked. This shows my versatility, flexibility, and proactive approach to learning.

My resume is enclosed for your consideration. Through my broad range of work experience, and extensive apprenticeship program at Wabush Mines, and a continuous attempt at upgrading and diversity, I am confident that I can be an asset to your company. I have worked at every section at Wabush mines giving me experience and troubleshooting skills to be a great asset in a demanding and changing workplace.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1484)

Go to Search Parameters...

Brief Description

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

Heavy Equipment Operator

Radio Operator Offshore

Welding Inspector/ Qa Qc Inspector

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Well testing Senior Operator.

Rig mechanic, rig technician

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

Oil/gas/water/wastewater electrical

Industrial Electrician/Instrumentation Technician with Linesman training

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Hydrocarbon Exploration and Development

Precision Drilling since Feb 2002, various knowledge in drilling different kinds of wells as well as downhole tools. I posses a excellent safety record. I have the ability to learn new jobs very quickly and throughly.

Regional Senior Account and Sales Manager with 9 years accomplished career track throughout the industry delivering and sustaining revenue and profit gains within highly competitive South East Asia Market. Exceptional communicator with a consultative sales style, strong negotiating skills, exception

Safety Engineer

E&I QA/QC Inspector, Certified QMS Lead Auditor, Having Oil&Gas onshore and offshore experience

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

Certified Rigger, Welder helper, and Forklift driver.

Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.

Critical Care Paramedic

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Instrument supervisor / technician v exp construction commissioning start up HSE

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Employment history with over 15+ years oil and gas exploration experience.

Field Machinist/Millwright

NDT Inspector-oilfield equipment

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Electrician - Construction

Experienced trainee driller, compitent derrickman, expiernced floorhand and roustabout with strong workover experience.

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out