Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #80043 next resume »»
CONTACT INFORMATION:
View contact information...

Experience: Crosby Tugs Galliano, LA
Chief Engineer September 2007 to Present
Coordinated 4 month vessel refit on an 8,000 HP, rig moving tug at Bollinger Shipyard in Larose, LA and a 5 months vessel repair period at Bollinger Shipyards, Morgan City, LA on a 10,000 HP anchor handling tug. Perform daily duties as Chief Engineer on 7,000 to 10,000 HP tugs in Gulf of Mexico.

Sirius Maritime Seattle, WA
Chief Engineer May 2002 to September 2007
Chief Engineer on ocean going tugs and petroleum barges. EMD, Caterpillar 3500 and Alco main engines. Reintjes, Faulk, Lufkin and Haley gearboxes. Markey and Intercon winches. Petroleum barges have DDA, Caterpillar and Northern Lights cargo and auxiliary engines, Byron Jackson deep well pumps.

Sea Coast Towing Seattle, WA
Chief Engineer March 1997 to May 2002
Chief Engineer on ocean going tugs, DDA-149, EMD-645, GE-FDM, Caterpillar-398, 399, 3500 series main engines. Faulk, Lufkin, Reintjes, Haley and MG gear boxes. Markey and Intercon winches.

Union Pacific Railroad Little Rock, AR
Machinist July 1994 to March 1997
Machinist at a major repair shop. Completed scheduled maintenance and unscheduled repairs on EMD and General Electric locomotives. Work included engine overhauls, component change outs, turbos, power assemblies, main bearings, pumps, gear train replacement etc. 6 months in component shop rebuilding Woodward governors, fuel injectors and control assemblies. 14 months as Lead Troubleshooter diagnosing problem locomotives and repeat failures.

United States Navy, Naval Amphibious School Coronado, CA
Instructor, Curriculum Coordinator June 1991 to July 1994
Lead Instructor at Naval Amphibious School, Coronado to US military and DOD personnel. Curriculum included overhaul, maintenance and casualty control procedures on DDA, Volvo Penta, Cummins and Evinrude/Johnson marine engines.

United States Navy, Assault Craft Unit One Coranado, CA
Chief Engineer July 1989 to June 1991
Chief Engineer on 172 foot landing craft. Responsible for supervision, and documentation of maintenance, operation and repair of the vessel.

United States Navy, USS Proteus Guam, Marianas Islands
Engineman First Class July 1987 to July 1989
Assigned as Lead Petty Officer of ships Aft Engineroom. Responsible for supervision and training of 27 watchstanders and maintenance personnel. EMD 645 diesel electric main engines and ships service diesel generators, Lufkin reduction gears, main propulsion control and monitoring systems, all associated pumps, piping and valves.

United States Navy, USS Barbour County San Diego, CA
Engineman July 1984 to July 1987
Initially assigned to Auxiliary Division, responsible for maintenance and repair of the ships HVAC and refrigeration system, deck cranes, winches, boats, galley, steam, potable water, sanitary, hydraulic, and fire fighting systems. Transfered to Main Propulsion, duties included maintenance and operation of ALCO direct drive main engines and generators, General Electric reduction gears, Kemawa controllable pitch propellers, ships air, ballast, fuel transfer and purification system and all associated equipment.

USCG Licenses and Endorsements:

Upper Level License
Third Assistant Engineer, Motors, Unlimited HP

Lower Level Licenses
Assistant Engineer, Limited
Designated Duty Engineer, Any HP

Endorsements
QMED, any rating
AB, Unlimited
Tankerman PIC, DL (Barge)

STCW Certificates
Officer in Charge of an Engine Room Watch (Third Assistant)
Officer in Charge of an Engine Room Watch (Assistant Engineer)
Rating Forming Part of a Navigational Watch
Proficiency in the Use of a Survival Craft

Related Training:

Hazwoper GE Advanced Fuel Injection
EMD Technical Woodward Governor Controls
Advanced Fluid Power Master Diesel Mechanic
Safe Gulf Medical Care Provider
Tankerman, DL, DC Total Quality Leadership

References available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 1482)Go to Search Parameters...
Brief Description
Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR
HVAC FOREMAN
Rigging & Lifting Specialist
Document Controller with 10 years experience in Oil & Gas industry
Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie
Driller with 9 years experienc on land rigs and 24 yrs. total exp. in drilling field
I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.
Drilling Supervisor with directional, horizontal experience .
Have more than 13 years of experience in log interpretation
Document Controller - Certification Supervisor cum Math/Physics/Computer Instructor
ITI(NCTVT)ELECTRICIAN) with liecence
Level III vibration Analyst with electronic and mechanical background
Instrument Pipe fitter / supervisor
More than 15 years working experience in Electrical/Electronics & Telecommunication.
Instrument Technician Radio technician Scada-moscad
My strengths lie im my ability to manage available resources and communicate with others
Driller / Tool Pusher (Onshore / Offshore)
Experienced PROJECT MANAGER with 10 years experience training and leading development teams to
Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.
Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic
Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.
15+ years of IT experience and 6 years of SAP BWv7 and SAP R/3 ABAP experience. I would like to introduce myself as a Consultant, having an Attitude & Aptitude for Analysis, with range of skills in Technical arena. I do have solid Experience in Conceptualizing, Developing.
Master Electrician
Qualified Welder / Fitter / Mechanic
Piping superintendant with 35 years experience in the oil and gas industry
Diagnose and repair engines, transmission and final drive systems including manual and automatic transmissions
Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w
Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).
Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician
Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen
Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion
I have worked in the Oil & Gas industry for over 20 years
Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard
Senior Welding Inspector QA/QC
20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.
been welding for 25 plus years...
Industrial Electrician
Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.
I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.
I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing
Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience
39 years experience running both surface & mineral titles & preparing reports
Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.
Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.
I am seeking a long term employment contract within a company as Rigger.
Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.
Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.
23 years of sales experience including positions as a sales representative, sales trainer and sales manager. I work very well with the public. I know how to close the client and get the answer I am looking for.
[ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com