Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #80108 next resume »»
CONTACT INFORMATION:
View contact information...

Key Experience
Structures and Infrastructures for oil&gas, industrial and mining projects.

Education and Professional Status
Bachelor degree in Civil Engineering, Bandung Institute of Technology - Indonesia

Experience
June 2008 – Present
Sr. Civil Engineer
KBR Indonesia

July 2007 – Present
Sr. Structure/Civil Engineer
WorleyParsons Indonesia

August 2006 – June 2007
Sr. Civil/Structure Engineer
Technip Indonesia

July 2004 to June 2006
Civil Engineer
Connell Wagner Indonesia

September 1997 to July 2004
Structure / Civil Engineer
PT Rekayasa Industri

February 1997 to August 1997
Structure Engineer
PT Reka Patria Ekaguna

Structure/Civil Engineering Professional Work Experience
June 2008 - Present
* Lampunut Coal Mining Project, Kalimantan Timur, Coordinator Area for Muara Tuhup Port and Teluk Timbau Port Design
* Moy Pocket Road Project-Option 2, Traveston Dam, Queensland, Australia, as Civil Engineer to design 8 km rural roads
* Coal Connect, Goonyella to Abbot Point Expansion Project QR (Queensland Rail), Queensland, Australia, as Civil Engineer with responsibility to design occupational crossing railway.

July 2007 - June 2008
* Mobil Cepu Ltd, Subsidiary of Exxon Mobil, FEED Project for Banyu Urip Project
As Lead Engineer with responsibility such as: Conceptual design infrastructure and structural such as building, earthworks, road, pavement, drainage, foundations, etc for all area

August 2006 – June 2007
* Citic Seram Energy Ltd, Design Settlement Skim Oil Pond
* BP WEST JAVA MM Platform Services and Rehabilitation FEED Project
* Amerada-Hess, Ujung Pangkah Liquids Development- Offshore Facilities FEED Project
* Detailed Structural Design & Analysis for the Construction and Installation of K.O. Drum & Open/Closed Drain Offshore Platform, tie-in to existing GTS-X Platform, MRST555 Burnt Pit Decommissioning Offshore Project, Total Indonesie
* Gas Plan Santos Oyong FEED Project As Lead Structural/Civil

July 2006
* BHP-Billiton, Meruwai Mining Project, East Kalimantan, Design Road and Culvert

July 2004 to June 2006
* Peak Downs Mine,(BHP-MHI Joint Operation) feasibility study Project, Gladstone, Queensland, Australia, design road/pavement and drainage, water treatment pond
* Blue Scope Indonesia (BSI), Expansion Road and Pavement design
* KPC Tanjung Bara Airstrip Resealing/Overlay Runaway Project
* BHP Billiton East Kalimantan Coal Port facilities at Tj. Santan & Marangkayu Project, Earthworks and land development and facilities
* KPC-Coal Chain Expansion: Design earthworks long and cross section conveyor line
* Trans Asia-East Kalimantan Railway Study
* KPC-Barge Facilities Project, job description: break water port design and slope stability, foundation, drainage, earthworks and settlement pond
* KPC-Bengalon port mining Project, design port facilities such as roads, earthworks, drainage, stockpile, settlement pond
* Jelamu Diversion Project at Coal Mining with PT Arutmin and Thiess Contractor Indonesia East Kalimantan, Indonesia
* KPC (Kaltim Prima Coal) - Dust Suppression System Improvement in Sangata east Kalimantan, Indonesia, design for Piping Installation and Water Resourcing.
* CSR-KGP Oxley-Brickworks Expansion Project, Australia, design for Bulk Earthworks, Concrete Pavement & Road works and Stormwater Drainage

September 1997 to July 2004
* Pupuk Kujang 1B Fertilizer Project, Petrochemical Project
Engineer for Sewer/Drainage and Waste Water Design, Underground Composite, Foundation Plan, Road & Pavement
* NPK Malaysia, Petrochemical Project
Engineer for Sewer/Drainage and Waste Water Design, Underground Composite, Foundation Plan, Road & Pavement
* PT Pertamina DOH Jawa Bagian Barat-CO2 Removal Subang (Oil & Gas Project)
Engineer for the design of Sewer/Drainage and Waste Water Design, Underground Composite, Oily Separator, Foundation Plan, Road & Pavement
* PGN-Gas Booster Compressor Station (Oil & Gas Project)
Engineer for the design of Sewer/Drainage & Waste Water Design, Underground Composite, API Separator, Burn Pit, Culvert, Foundation Plan, Road & Pavement
* Himpurna-Califormia Ltd, Dieng Geothermal Project
Engineer for the design of Foundation Pipe Support for Pipeline, Foundation for Scrubber Vessel, Rock Muffler Facilities, Platform Steel and Foundation, Shelter for Electrical and Instrument Facilities.
* Proposal & Feed Project for Trans Riau Pipeline Project (Oil & Gas Project)
Project for transporting crude oil from Station Sei Karas to Station Buatan with system Insulation Heating Transform.
* PGN-Gelam Gas Compressor Project (Oil & Gas Project)
Engineer for the design of Silencer & Equipment Frame Support, Platform Design, Pipe Support
* Pupuk Kalimantan Timur Petrochemical Project
Engineer for the design of Pipe Rack, Pump Foundation with dynamic analysis, Equipment & Storage Foundation.
* Engineer at Rimba Belian (PTP XIII), Crude Palm Oil (CPO),
Job Description: Sewer/Drainage and Waste Water (Water Treatment) design, Underground Composite, Foundation Plan, Road and Pavement (Infrastructure)
* PT Mandala Nusantara-Wayang Windu Geothermal Project (Oil & Gas Project)
Deputy Lead Engineer for the Construction and Engineering Power Electric Plant
Responsible for: material take off for rebar, Pipe Bridge, Platform, Equipment Foundation, Vessel Foundation, Wellpad design coordinate support, bar bending schedule, pipe support for pipeline, Secondary Support, Drawings.
* Musi Pulp (KSH) Project
Engineer for the design of Pipe Rack
* Cement Gombong Project
Engineer for the design of Underburn Clinker Silo Building

February 1997 to August 1997
* PT Cement Gombong - Cement Gombong Project
Engineer for the design of Cooling Tower Building
* PT Monagro Kimia - Monagro Chemical Project
Civil/Structure Engineer for the design of Pump Foundation, Vessel Foundation, Tank Storage Foundation, Platform for Mezzanine, Pipe Rack, Pipe Bridge, Storage Building.

Skilss:
* 12D Land Development Program, design for Civil, Pipeline, railway, Survey and others application for land development
* SACS Structural Engineering Design Program for Offshore Structure
* Staad III and StaadPro for Structural Design Program
* Slide geotechnical program for calculate the slope of soil stability
* Strucad program for take off material, shop drawing and mapping program
* Computer engineering as MathCAD, etc
* Program application AutoCAD for drawing
* Computer literate in Windows and many application such as MsOffice (Excel, Word, Power Point),Ms Project, Visio, etc
* Use programming in Fortran and Pascal language
* AISC, DIN, ACI, JIS, ASTM, AASHTO, SKNI/SNI, API etc. Standard
* Prediction sea tide with Least Square method and Program Sea Tide with Fortran Language

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1001 to 1050 of 1467)Go to Search Parameters...
Brief Description
A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.
Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan
Operations Supervisor - Overseas experience
I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial
HSE Specialist
BSc in Economics(First Class), ACICMN, AICEN
Geoscientist. I am a highly qualified, versatile geoscientist with 7 years of Petroleum industry experience, 2+ years in Processing Geophysics with a major global energy company.
Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical
Senior Instrumentation Specialist / Designer
been in oil field for 2 years, been in some type of managment for over 7 years
35 + year mechanic
15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop
Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management
Logistics, Technology, Transport and Management Professional
Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)
International Business Development - Africa/Europe/Middle-East
Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.
Power Generation Technician
Unlicensed Engineer, Diesel Mechanic
Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3
Maintenance, HVAC, MAnagement and Supervision, Safety
Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering
Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer
I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.
Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as
Good at learning and implementing, target oriented, flexible and can work under any conditions
30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !
Fitter Including Machining and Diesel Fitting
Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in
Landman - Full Title, Curative Work, Draft Clearance, Due Diligence and Leasing Experience
Construction manager, laborer, Class A CDL Drivers license, mechanic
Maufacturing Automation
Mechanical, electrical, structural maintenance & repair, estimating, project supervision.
Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager
My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
NACE Level II Certified Coating Inspector, Certified Welding inspector
MWD/LWD Specialist with 3 years of Professional Oilfield Experience, Associate Degree holder in Mechanical Engineering, Got Specialised Trainings in Academy from SCHLUMBERGER & BAKER HUGHES for "MWD Technology"
10y in National Oil company, HND Mechanical, 4y Artifical lift pumps Technican, 4y Drilling & Wellservices information mangment Engineer
Industrial construction electrician with two years maintenance in open pit mine
I graduated from Associated Training services for Heavy Equipment Operator .N.C.C.E.R Certification on a variety of excavating equipment .I have a Class A CDL with Tanker Endorsement.I am a hard dedicated worker and a fast learner..
Remote Paramedic, Firefighter, Paramedic
City and Guilds Diploma in Electrical Engineering,Apprenticeship training,5 years experience.
nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience
D.A.E. (Mechanical) 1970/3300 Second 1989
Qualifications in chemical process & equipment designs especially in energy and environmental industries, looking forward to enter marketing & procurement fields.
Reservoir characterization expertise including geological integration and interpretation of data (wireline logs, core, and seismic), petrophysical property modeling, geostatistics, geocellular modeling, and flow simulation. Proficiency with Petrel and other industry standard applications.
Non Qualified Diesel Mechanic, Non Qualified Petrol mechanic, Non Qualified Trailer Mechanic, Non Qualified Jetski and Boat technician, Rides Operator
I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects
Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field.
I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   [ 21 ]   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com