Resume - Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowled...

Misco Jobs

Resume #80361

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To obtain a challenging position that will allow me to gain knowledge and experience in the area of Computer Aided Design and Drafting in Technical Department. To work and grow along with an employer mutually obtain our objectives.
SUMMARY:
* More than 3.8 years credible work experience in the field Electro-mechanical (MEP) and experience gained mostly through overseas assignment from Technical Department of the Multi-national engineering companies.
* Knowledge of International codes, standards and regulatory guidelines that apply to the design disciplines.
* Able to work effectively in a team environment or independently with minimum guidance or supervision
* Familiar in AutoCAD 2008 & 2009, Microstation-v8, Photoshop & Microsoft Office.
* Conversant to prepare equipment general arrangements (GA), isometrics, sections, elevations, plans, single-lines, cable block diagrams, schematics, shop drawings, as-built drawings, interconnect wiring diagrams & loop diagrams.

COMPANY INDUSTRY
A&P Paraskevaides & Partners, Dubai, UAE Mechanical Electrical Plumbing (MEP) Contractor
AIRWIN Engineering, Chennai, India. Mechanical Electrical Plumbing (MEP) Contractor

EMPLOYMENT SUMMARY:

A&P PARASKEVAIDES & PARTNERS LLC 13 June 2007 to till date

Company Profile: A leading MEP contracting Cyprus based MNC in UAE undergoing MEP projects (Hospitals, luxury apartments, Villas, High-rise buildings &Star Hotels) in Europe and Gulf countries with high standard & quality of works.
Designation: MEP Draughtsman
Reporting to: Project Engineer (Conspel Emirates LLC)
Projects: * Al Bandar @ Al-Raha Beach Development, Abu Dhabi, UAE
* Intercontinental Hotel @ Dubai Festival city, Dubai, UAE
Duties:
„Ï Prepare shop drawings for Electrical power and systems (lighting, power, containment, fire alarm, emergency lighting, nurse call system, CCTV, earthing and lightning protection, telephone, access control and TV data system drawings.
„Ï Prepare shop drawing for ELV systems.
„Ï Prepare Coordination drawings.
„Ï Prepare DB and load schedules as per DEWA & ADDC regulations
„Ï Prepare single line and schematic drawings for Power & systems.
„Ï Prepare Electrical material Take-off and BOQ's.
„Ï Prepare Builder's work drawing for wall and slab openings
„Ï Prepare Reflected ceiling plan (Co-ordination with all MEP services).
„Ï Prepare Installation detail drawings for the Electrical and Mechanical equipments.
„Ï General administrative duties within the design department.
„Ï Checking the drawings produced by others.
„Ï Ensuring the accuracy and high quality of drawing works.
„Ï Receive project assignments from design supervisors.
„Ï Liaise and assist with design engineers and project engineer.
„Ï Attendance in the field for the preparation of AS-Built drawings.

AIRWIN ENGINEERING 16 May 2005 to 21 May 2007

Company Profile: A Leading Detailed Design contractor in South India
Designation: Electrical Draughtsman
Reporting to: Electrical Engineer
Duties:
„Ï Prepare Shop drawings for Lighting, Power, and Containment, Fire detection and voice alarm layouts.
„Ï Prepare Electrical details for LV room, Fresh Air room, Heat exchanger room, Pump room, Electrical room, Mechanical room and Kitchens
„Ï Prepare detail drawing for Electrical equipments.
„Ï Prepare Single line drawings (Raiser diagram) for Power.
„Ï Prepare Schematic drawings for Power and Systems
„Ï Prepare Electrical drawings - connections, block diagrams, cable schedules.
„Ï Flexible approach with Team and engineers.
„Ï Coordination with Mechanical services for Builders work and Service coordination drawings.
„Ï Incorporating consultant comments for the revision drawings.
„Ï Prepare Xref from Architectural drawings
„Ï Prepare As-built drawing as per site installation.
„Ï Perform other related duties as necessary.

PASSPORT DETAILS:
Passport Number Date of Issue Date of Expire Place of Issue
F2625709 27.04.2005 26.04.2015 CHENNAI

Academic Qualification: S.S.L.C (Passed in April 2002)
EDUCATION:
Si No Course Year of Completion Name of Centre % of Marks
1 D.E.E.E.,
(Diploma in Electrical and Electronics Engineering)
(3years Full Time) April, 2002
to
April, 2005 Saint Michael's Polytechnic College, Avadi, Chennai-62. 81.62
First class with Honors
2 Auto CAD May, 2005 CADD Centre, Avadi,
Chennai-54.

COMPUTER KNOWLEDGE:
EXCELLENT GOOD BASIC
MS Office 2003 & 2007 „Ï
Auto CAD 2009 & 2008 „Ï
Microstation v8 „Ï

PERSONAL INFORMATION:-
Date of Birth: 24 April 1984
Sex: Male
Marital Status: Unmarried
Nationality: Indian
Religion: Hindu
Driving License: India driving license (Valid till 14.06.2024)

Communication skills:
READ WRITE SPEAK
ENGLISH „Ï „Ï „Ï
HINDI „Ï „Ï „Ï
MALAYALAM „Ï
TAMIL „Ï

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 1485)

Go to Search Parameters...

Brief Description

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

londery worker ,waiter & data feeding

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I have Masters Degree in Geology with experience in Coal Exploration.

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Qualified Instruments Technician with a National Diploma and Certificate of Apprenticeship

ms word,internet marketing,power point,quality control assuransce,NIM nigerian institute of management , NISLT nigerian institute of science and lab technicaince , PGD post graduate diploma in industrial chemistry , HND in polymer technology

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Medic/Doctor/HSE

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Profoundly talented and skillful UT/welding Inspector with over ten years experience in field of Quality control and inspection of light and heavy fabrication for refinery, oil and gas transmission line and onshore/offshore steel structure.

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

HEAVY EQUIPMENT OPERATOR

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

API 653 experience in corrosion engineering, Inspection,engineering consultancy and RBI techniques. Specific experience in Hi end inspection skills, storage tanks and pipeline inspection. Acoustic emission and Guided wave trained.Overseas experienced

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Man of many trades

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out