Resume - My capabilities have been achieved through many experiences which include traini...

Misco Jobs

Resume #80378

CONTACT INFORMATION:
View contact information...

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
The support includes the use Microsoft and CAD software. My experience spans the use of excel functions, such as logic equations and tools such as data links, assisting in the migration of data to and from CAD, reducing the need of redundant data entry.
A primary objective has been to focus on the improvement of productivity. By stream lining the design process; understanding local & regional jurisdictional standards and UBC codes. By using specific tools; road sections can be created, specific singular modifications can be made, benches at right of ways can be extended, cut/fill slopes modified,… as break lines are imported defining centerlines, flow lines, curbs and daylight boundaries. Subsequently; in highway design, drainage problems are identified, super-elevated curves are manipulated as speed changes effect site distances and in residential design, pad elevations projected. A 3D model is created,… rendered. With minimal effort you now can then provide volume calculations, quantity takes-offs and area tables using CAD tools and VBA/lisps.
My recent experience has allowed me to model in excess of 80 existing pipelines (tile drains); created within 5 pipe networks. In addition, proposed sewer, water and storm drain networks. The model included multiple surfaces; existing ground, multiple proposed rough and finish grade surfaces derived from a tentative tract map of a master planned community encompassed by of 3 major arterials. As well as the natural water level since the project was located at a negative surface level. The key purpose was to show the impact each existing pipeline had on the proposed and how each surface impacted each other. By cutting sections across model we were able to identify the multiple impacts, enabling us to alter specific pipelines, utilities and roadways as needed.
My experience includes many public works projects, from sewer and water extensions, to roadway widening, culvert crossings along with miles of overlay. I have assisting in the process identifying cost savings by eliminating excessive removals with the use of survey data verse proposed designs. This was achieved by manipulating roadway designs, adjusting site distances and other vertical design criteria.
Additionally, I am familiar with military environment and I have over ten years of experience working in the compressed gas industry; including the design, installation and maintenance of automated control systems for piping, storage vessels, cryogenic pumps, and vaporizers. Including the use of analytical hardware and processes used to maintain component purity.

In this brief summary, my objective has been to give you a small explanation of how my level of experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

OBJECTIVE

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.
My objective has been to give you a small explanation of how my experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

EXPERIENCE

2008- Present Sr. Cad Technician
Engineering Consulting Services, Inc. Lexington, KY

Responsible for the design and creation of surface mining maps for permitting the extraction of geologic coal seams. Using design methods and Cad standards as defined by the state standards and other specific requirements defined.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for initiating in house design standards and continuing advancements towards bringing the latest Cad technologies on line and in use. Lead and coordinate user as advancements are established.
Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2005- 2008 Project Engineer \ Sr. Designer
K & A Engineering, Corona, CA

Responsible for the design and creation of TTM's, on through the production of rough grading, street, sewer and water…etc. Using design methods and standards as defined by jurisdictional standards and other specific requirements defined. Responsible for the direct transition into production as a final design is approved.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for coordinating design teams, ensure smooth, correct and timely production of workload.
Responsible for continuing advancements towards bringing Civil 3d (2008) on line in our office. Lead and coordinate user lunch and learning events, coordinate training on site or off site. Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication from clients.
Responsible for communication and coordination to maintain client relationships.
Responsible for billings and budgets.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2000- 2005 Designer / Project Engineer
Nolte Associates, Corona, CA

Responsible for training, Cadd support, project file structures and design standards for Corona office.
Design and processing of subdivision and public roadway projects.
Responsible for keeping projects within budget.
Responsible for dealing directly clients.
In charge of maintaining the CSUF Master Plan. Working directly with CSUF engineering department. Point of contact for all new projects for ongoing CSUF expansions. (Projects to date; Parking structure I, & II, College blvd. realignment and the addition of the new Law college expansion)

1997-2000 Computer Design/Engineer, Partner
Gas Technology Systems, LLC

Designed, programmed, built and installed Automated Compressed Gas filling & Analytical (data acquisition) systems into regional Gas plants.
Gas Systems automated the complete process from the Storage vessels, the cryogenic pumps, vaporizers, to the single cylinder filling manifolds to pallet filling of air gases (Ar, N2, O2) and other components (CO2, He & H2) to mixtures.

Analytical System also automated the process of analyzing the components validating the specific specifications for different products (industrial, food, high purity and medical grades). The automated process controlled trace oxygen, moisture, hydrocarbon analyzers measuring specific components to part per million levels. The system controlled gas chromatographs with differing columns to quantify percent of ingredients.
Create customized software allowing single point selection of component, or mixture from a customized database.
Created new programs to facilitate the processing DOT requirements for Medical Gases.
Provided 24/7 support, including onsite training for end users and
Administrators.
Linked filling process to second party tracking software.

1993 - 1997 Computer Design/Engineer, Owner
MJK Analytical Systems

Designed, programmed, built and installed Automated Compressed Gas filling systems.
Automated the process of pumping cryogenic (liquid) air gases (Ar, N2, O2) and other mixing components (CO2, He & H2) using high pressure cryogenic pumps, ambient and high temperature vaporizer to fill high pressure cylinders. The process used pressure vs. temperature and/or weight to measure the appropriate volumes.
Create software allowing single point selection of component, or mixture from a customized database.
Created programs to facilitate the processing DOT requirements for Medical
Gases.
Provided one-on-one onsite training for users and administrators.

1990 - 1993 Technician
Air Liquide, Inc
Santa Fe Springs Ca & Walnut Creek, Ca

Responsible for maintaining plant processes.
Responsible for designing and installing new processed upgrading existing plant design.
Investigated existing plant production for funding of production enhancements.
Responsible for training, production crew for OSA requirements, basic operation and plant updates.
Worked globally with Air Liquide headquarters USA, Canada & France, enhancing and developing worldwide production methods.

EDUCATION

1980 - 1983 USMC, Paris Island, SC Combat Engineer
Camp Lejuene, NC Journeymen (Engineer Training)
Camp Pendleton, CA Demolitions (Combat Engineering)

1983-1985 University New Hampshire, Industrial Electronics
Associates in industrial Electronics
Durham, N.H.

1986 Beta Technical Institute
Computer Added Drafting Technologies,
Bellflower, CA

2003-2005
2008 Fall Mount San Jacinto Community College,
Continuing my pursuing for an EIT
Menifee, CA

Ongoing Courses in AutoCAD, Land Development Desktop, Civil 3D, 2006, 2008
Carlson, Civil
Microstation, Inroads
Microsoft: Word, Excel, Access, PowerPoint

*Private & Public Project Experience and Referrals upon request.

SKILLS

Software AutoCAD, Land Development Desktop, Civil 3D, thru- 2008
Carlson, MapCad, Microstation, Terramodel
Haestad Methods; Storm CAD - Storm & sewer Systems
Microsoft: Word, Excel, Access, PowerPoint

Areas of Design Commercial, mapping, grading, drainage, engineered waste management plans Land Development, residential tracts, grading and earthwork,
Mapping, Final maps, Tentative Tract Maps, Permitting
Public works, utility extensions, roadway widening, rehab/overlays
Road design, widening, striping, rehab/overlays
Utilities; sewer & water, storm Drain.

During the time I worked with Engineering services I used core samples to identify coal seams within 4 adjacent permits. With client input the specific mining types were identified by seam. Using aerial topography a collective 3d model was built. Using contour, area or augur mining, an undercut surface was built projecting from down from upper most seam with defined slopes and benches. With the subsurface built a post surface is projected from the lowest seam matching the preexisting terrain unless added criteria were defined. Volumes were the extrapolated for spoils, reclamation and coal for each permit.
When I began with K & A Engineering I assisted in providing initial engineering services preparing lot studies, land use plans, utility layouts and tentative tracts maps, in addition to providing mapping. I lead the generation of a continuously evolving 3d surface with infrastructure for eight of twelve concurrent tentative tract maps for the Boulder Springs project.
Once final engineering was underway, I assisted in the prepared Rough Grading Plans, Street improvement Plans, Sewer and Water Improvement Plans. These plans included off site Sewer Lift Stations, 8,000 feet of off site sewer main with 5,000 feet being a force main.
Once Final engineering was underway on the Boulder Springs South project I began working on as the project engineer. This project was similar, starting with 334 lots on the tentative map. This project was intricate because the project was split by a 300' wide water course being crossed by a 6 lane arterial. The crossing requiring three 40' by 9' arch culverts. Additionally in order to provide secondary access to the second half of the project it was necessary to run an arterial to the nearest primary county route three miles away. This added a lot of coordination since the undeveloped land had existing tentative tract maps owned by multiple developers.
Working with Nolte Associates I worked on Canyon Heights which is a 400-lot subdivision rated as rural mountainous, which has slopes of 25% or greater. Beside the normal challenges, it was necessary to make drastic changes to the adjacent primary access road after new county ordinances upgraded its speed and capacity. In turn it became necessary to minimize right of ways, super elevated the cross-section to met speed requirements and enable site distance requirements to be met.
The project design included: constructing a grass-lined, trapezoidal, channel section in an existing unnamed stream bed; the construction of drop structures; a rip rap revetment to protect proposed homes; off-channel water quality basins and an existing, "in-channel", 65-acre-ft, detention basin.
Another stimulating project was for the City of Poway making improvements to Poway road (one mile). The project included the widening, the construction of landscaped center medians, pavement rehabilitation, restriping for increased street capacity and the reconstruction of an adjacent earth channel. Additionally, as part of the widening, the expansion of & addition of a box culvert, doubling the capacity was necessary.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 1489)

Go to Search Parameters...

Brief Description

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

I at DK India shoulder the responsibility of showing readers the actual position of their destinations on accurately and intricately crafted maps. The scale varies from large country maps to small walk maps, which guide those traveling by foot from one tourist attraction to another

Water Survival, Safe Gulf, Trained in CPR and First Aid, Rigging Certifications

Precision Millwright w/ Machinst and Electrical Background

Welding and electrical and management and mining class 32 hour certified fork lift operator

Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

Piping and Welding Supervisor QA

Prventive check-up/fixin Pump of diverse kind/calibrate labs instruments/operates main instruments in a water plants

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

Operations Supervisor - Overseas experience

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

HSE Specialist

BSc in Economics(First Class), ACICMN, AICEN

Geoscientist. I am a highly qualified, versatile geoscientist with 7 years of Petroleum industry experience, 2+ years in Processing Geophysics with a major global energy company.

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Senior Instrumentation Specialist / Designer

In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.

been in oil field for 2 years, been in some type of managment for over 7 years

35 + year mechanic

15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

Logistics, Technology, Transport and Management Professional

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

International Business Development - Africa/Europe/Middle-East

Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.

Power Generation Technician

Unlicensed Engineer, Diesel Mechanic

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

Maintenance, HVAC, MAnagement and Supervision, Safety

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

Good at learning and implementing, target oriented, flexible and can work under any conditions

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in

Landman - Full Title, Curative Work, Draft Clearance, Due Diligence and Leasing Experience

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

NACE Level II Certified Coating Inspector, Certified Welding inspector

MWD/LWD Specialist with 3 years of Professional Oilfield Experience, Associate Degree holder in Mechanical Engineering, Got Specialised Trainings in Academy from SCHLUMBERGER & BAKER HUGHES for "MWD Technology"

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out