Resume - Certified Rigger, Welder helper, and Forklift driver.

Misco Jobs

Resume #80645

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
I have extensive experience and skills that are relevant to the rigging position. Im qualified as a Rigger, but have great knowledge of operating a forklift and other powered hand tools.
------------

OBJECTIVE:
------------
Im expecting to become apart of the Company and learn more as I develop. I plan to become a leader and have a great name for myself and the Conpany that Im behind.
------------

WORK EXPERIENCE:
------------
Curtis Callais Welding
02-2006 - 11-2008
Certified Rigger
Work on platforms in the Gulf Of Mexico loading and unloading materials on & off boats.Work on jack-up boats and perform daily job needed.

Whitetail Oil Company Inc.
01-2005 - 02-2006
Certified Rigger
Work offshore with other contracting companies and perform pipe line jobs. Work on rig in the Gulf and help with supervisor job assignments that was needed to be performed.

Mid-South Services Inc.
12-2003 - 01-2005
Rigger - Forklift Driver
Work in Fourchon with MMSI Companies and mix chemicals needed. Pump bay rite into boats as needed. Drive foklift to load and unload materials on boats as instructed.

EDUCATION & CERTIFICATION:
------------
I attended school at Safety Consultants and odtained my certifications: Im O.S.H.A., Safegulf, and Rigger certified. Im also taking online courses getting my Ass.degree in Buisness Administration.

ADDITIONAL INFORMATION:
----------
I know that Im a good canidate for the position. I have great knowledge of the job being advertised. Im always and willing to work any open schedules in any location.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1484)

Go to Search Parameters...

Brief Description

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

Heavy Equipment Operator

Radio Operator Offshore

Welding Inspector/ Qa Qc Inspector

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Well testing Senior Operator.

Rig mechanic, rig technician

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

Oil/gas/water/wastewater electrical

Industrial Electrician/Instrumentation Technician with Linesman training

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Hydrocarbon Exploration and Development

Precision Drilling since Feb 2002, various knowledge in drilling different kinds of wells as well as downhole tools. I posses a excellent safety record. I have the ability to learn new jobs very quickly and throughly.

Regional Senior Account and Sales Manager with 9 years accomplished career track throughout the industry delivering and sustaining revenue and profit gains within highly competitive South East Asia Market. Exceptional communicator with a consultative sales style, strong negotiating skills, exception

Safety Engineer

E&I QA/QC Inspector, Certified QMS Lead Auditor, Having Oil&Gas onshore and offshore experience

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

Certified Rigger, Welder helper, and Forklift driver.

Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.

Critical Care Paramedic

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Instrument supervisor / technician v exp construction commissioning start up HSE

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Employment history with over 15+ years oil and gas exploration experience.

Field Machinist/Millwright

NDT Inspector-oilfield equipment

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Electrician - Construction

Experienced trainee driller, compitent derrickman, expiernced floorhand and roustabout with strong workover experience.

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out