Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81084 next resume »»
CONTACT INFORMATION:
View contact information...

Objective

To obtain a job with your company
Work History
Crane Field Technician
Konecranes Inc, Tulsa, OK 2008 - Present
Maintain cranes at customer facilities, pm's cranes and installs of new cranes. Disassemble machinery and equipment to remove parts and make repairs. Repair and replace broken or malfunctioning components of machinery and equipment. Repair and maintain the operating condition of industrial production and processing machinery and equipment. Examine parts for defects such as breakage and excessive wear. Reassemble equipment after completion of inspections, testing, or repairs. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Operate newly repaired machinery and equipment to verify the adequacy of repairs. Clean, lubricate, and adjust parts, equipment, and machinery. Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. Record repairs and maintenance performed. Study blueprints and manufacturers' manuals to determine correct installation and operation of machinery. Record parts and materials used, and order or requisition new parts and materials as necessary. Cut and weld metal to repair broken metal parts, fabricate new parts, and assemble new equipment. Demonstrate equipment functions and features to machine operators. Enter codes and instructions to program computer-controlled machinery.

Maintenance Technician
Underwood Truck Repair, Pryor, OK 2006 - 2007
Adjusts working parts, such as fan belt tension, voltage output, contacts and springs, using hand tools, and verifies corrections, using gauges.
Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.

Platoon SGT
Thunderbird Youth Academy, Pryor, OK 2004 - 2006
Supervise Cadets attending the thunderbird training program. Supervise 25
male cadets and 6 female cadets. I followed the Bravo SOP and work well with other cadre on my shift and all other shifts, I report to the Shift supervisor and enforce the rules and regulations and keep total control at all times.

Maintenance Electrical Journeyman
Orchids paper products, Pryor, OK 2001 - 2004
Maintain winders, wrappers. Motor controls, Variable speed Drives, Voltage 460 &
below, set up machines, maintain electrical services for all equipment.
Installation of new equipment and maintain it. Adjusts working parts. Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic.

Heavy Machinery Mechanic
Oklahoma army national guard, Pryor, OK 1992 - 2001
Maintain military equipment and vehicles. Adjusts working parts, such as fan belt tension, using hand tools, and verifies corrections, Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.
Disassembles defective unit, using hand tools..

Education
Pryor High School - Diploma
Orchids electrical classes, Oklahoma state university
Electrical and electronics degree

Certificates & Licenses
US Army -Heavy duty machinery mechanic (62B) Army -
Plumber/ pipe fitter (52K) Army - Combat lifesaver (92B)

Driver's License
Type: Commercial, Class A
Endorsement: Passenger
Restrictions: Air Brakes, School Bus

Volunteer Experience
I love to volunteer for my kids sporting events; I have coached soccer, baseball & football.

Military Service
Oklahoma National Guard August 1992 to Aug 2001. - Honorable Discharge.
Specialist first class - heavy Equipment mechanic.
Commendations: Merit Awards and Unit Awards.

References
References provided upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 551 to 600 of 1474)Go to Search Parameters...
Brief Description
I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich
An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator
Rigger
Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.
Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank
CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.
Machinist- licenced
COATING INSPECTOR CV
Instrument Supervisor
Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.
Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.
OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.
Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East
Turbine tech.
I have a very strong back and am not affraid of hard work. I am very punctal
Geology, To be graduated.
I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.
I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.
To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.
Electrician who posseses a wide variety of electrical knowledge
Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.
Experienced Floorhand/Roughneck
I wish to work in a challanging environment of the oil industry
Attorney and Landman with excellent tract record of acquiring Oil and Gas Leases. Over 10 years title experience, with specialized training in probate and non-probate transfers of property interests; including trusts and all matters relating to the administration of estates. Diversified experience
I’m extremely interested in obtaining a post either as Geophysicist / Geologist / Petrophysicist or any relevant position that fit my education back ground. I have outlined some working experiences and developed talent in geology (Geocience) about myself in the Resume attached for consideration
• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety
Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,
Senior Mechanical Draughtsman(MEP)
Asset Management Application Support
To Become employed as a Instrument Tech, Instrument Designer, or Process Operator
I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.
Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.
Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.
sales, marketing, business development general management
Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)
to obtaian a job
I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.
I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.
Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)
Many years of experience, very detailed orientated.
Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.
I&C Technician with geothermal experience
Welder
I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.
Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.
Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.
Worked service rigs for 2.5 years
Instrument technician
Versatile, knowledgeable, exploration geologist
An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm
1   2   3   4   5   6   7   8   9   10   11   [ 12 ]   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com