Resume - •BSc in Engineering with 8 years of experience in Oil & Gas EPC and Communicatio...

Misco Jobs

Resume #81105

CONTACT INFORMATION:
View contact information...

Summary
* BSc in Engineering with 8 years of experience in Oil & Gas EPC and Communications industry.
* Field support and Loop test coordinator for Petro-Canada RCP project site in Canada.
* Excellent interface abilities with client/vendor management teams
* Experience in preparing as-built data sheets, instrument index, material and vendor requests.
* Hands on experience with Intools, Bentley REBIS and Team Works.
* Knowledge in SCADA, HMI, ABB Bailey, Delta V DCS system and PLC programming.
* P&ID, loop drawings and control logic diagrams.
* DCS I/O, Foundation Field bus I/O assignment and design of DCS Marshalling panels in Intools.
* Familiar with OSHA, CSA, ANSI, IEC/ISO/ISA-S84.01 and international electrical safety and hazardous location standards and codes.
* Familiar with various communication protocols such as RS-232, RS-485, Modbus, Foundation Fieldbus, Device Net, Control Net, and TCP/IP.
* Auto CAD: Used for generation of loops, JB wiring layouts, Marshalling panel layout, 2D location drawings, JB/ Local control panel locations.

PROFESSIONAL EXPERIENCE:
-----------------------

Organization: Bantrel Inc, Calgary, Aug 2006 – Dec 2008
Position: Instrumentation and Control System Specialist
Projects: – SHELL Scotford Upgrader Expansion-1 (SUEx-1), Canada
– PETRO-CANADA RCP (Refinery Conversion Project) and EDD Project,Canada

ENGINEERING EXPERIENCE
* Prepared CWP for Revamp work for PETRO-CANADA RCP project.
* Involved in the Creation and Demolition of instruments, junction boxes, instrument location drawings, marshalling panel drawings, loop drawings, datasheets and updated instrument index for revamps.
* Prepared Instrument Engineering datasheets.
* Involved in the preparation and review of materials requisition packages for all Instruments.
* Involved in the technical review of Instruments and its selection criteria.
* Performed QA/QC/Squad checks of wiring diagrams and location drawings.
* Intools and Bentley REBIS Wiring Module for conventional instruments and FF instruments. Created marshalling panel wiring, JB and loop wiring, generation of loops, Marshalling panel wiring drawings, X-wiring reports and instrument index.
* Auto CAD: Generated Loop drawings, JB wiring layout, 2D location drawings, 2D control building layouts plans, 3D model review for instrument location and JB/Local control panel location layouts.
* Performed Instrumentation and control system cabinet assembly, power up marshalling panels and prepare documents for client requirement.
* Performed HAT/FAT and Site Acceptance Tests for Petro-Canada project and at site.
* Panel QC's against drawings issued for construction and redline mark-up for final issue.
* Checked analog I/P point to up/down, forced analog O/P signal from graphics to filed point and used control builder to build loops using Honeywell Experion PKS.
* Performed SIL Verification for Petro-Canada RCP revamps project.
SITE EXPERIENCE
* Worked as field support and loop check co-coordinator at Petro-Canada RCP site in Edmonton.
* Verified construction work as per CWP's and validated work as per QA/QC procedures.
* Identified and prepared missing QA/QC check sheets.
* Interfaced with Electricians for EHT/ MCC wiring/ Device Net communication issues.
* Ensured all pre-commissioning and commissioning check sheets, reports, and punch lists are completed, as required, and incorporated within each hand-over package.
* Assisted in installation of transmitters, On-Off valves, MOV's, flow meters, F&G devices, vendor packages and DCS/PLC cabinets.
* Supported to complete QA/QC of loop check out, work handover from construction team to Commissioning & Start-up (CSU) team.
* Worked with package vendors for RFI, QC of received vendor packages against Bill of material.
* Coordinated in testing and verifying of vendor packages with vendor and operations team.
* Involved in completing as-built packages in EDD project.
* Loop Functional Test Engineer at PETRO-CANADA RCP project U&O and Revamp units.
* Assisted field technicians in instrument calibration using HART communicator.
* Managed punch list items for outstanding loops and system turnover to client.
* Attended progress meetings with construction manager/ client and provided daily status reports
* Conducted loop test activities using Experion PKS at PETRO-CANADA RCP site, Edmonton.
* With the use of Honeywell Experion PKS station for loop checks/tests, verified all tags in graphics & checked details, engineering unit of the tag, variation on the tag and calling the point from field to control room.

Organization: DVT Solutions Inc, Calgary, Mar 2004 – Jul 2006
Position: Test and Design Engineering Support

* Conducted CSA/UL electrical safety evaluation tests on different electrical panels, electronic, telecom, wireless, instrumentation and communication products.
* Assisted clients to troubleshoot prototype products for electrical grounding, bonding, and shielding issues to qualify for regulatory approval and/or certification of the product.
* Provided ongoing engineering expertise, continuous improvements in the assigned areas of electrical safety requirement, electrical panel design, test and verification responsibilities.
* Initiated quality management system training and quality process for compliance test lab.

Organization: Sanmina – SCI Product Integrity, Calgary, AB Oct 2000 – Feb 2004
(Formerly part of Nortel Networks Limited)
Position: Test Engineering Specialist
* Responsible for setup wireless cell phone base station system for compliance test and certification.
* Developed and implemented automated data acquisition system using advanced pneumatic and optical instrumentation.
* Prepared installation procedures, control test plans, test procedures, test reports and quality check lists as per ANSI and IEC/ISO17025/CSA/UL/FCC standards and methods.
* Conducted electrical safety and reliability tests on cell phone base stations, electrical, electronic, and wireless equipment, industrial and commercial products.
* Troubleshoot with Telecom/Wireless/LAN/WAN/Optical networks communication problems.
* Test and troubleshoot of electrical and EMI/EMC problems on Nortel's Wireless cell base stations, GPS transceivers, GPS antennae, GE RTU's, gas detectors and transmitters etc.
* Performed and maintained calibration results, corrective and preventive maintenance documents for electronic, wireless, telecom test and measuring instruments.

EDUCATION:
-----------
Bachelor of Electronics and Communication Engineering.
Bangalore University; Bangalo 1989 -1995
Diploma in Network Administration and Computing.
Institute for Computer Studies, Calgary, 2002

CERTIFICATION:
--------------
Automation Specialist
Southern Alberta Institute of Technology, Calgary, 2006
* Safety Instrumented Systems (SIS) – 2 Levels.
* Distributed Control Systems and Applications – 3 levels.
* PLC Applications – 6 levels.
* Process Instrumentation

ADDITIONAL INFORMATION:
------------
I am sportive person, my hobbies are Sky Dive, cycling, foot ball, skiing, in-line skating, reading, enjoy community service.

I am serving as President for one of the community association and do lot of fund rising activities.

I have few references in related to different filed of expertise which can be provided per request.I am a Cian Citizen.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 1466)

Go to Search Parameters...

Brief Description

Scaffolding & Safety

Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.

Instrument Technician with 19 years experience, trade and some college. Computer literate. Can do any of maintenance, planning, construction, installation, supervision, pre-commissioning, QC, calibration, documentation, faultfinding, wiring, loop checks, and more.

There are three distinct areas to my trade & training in the R.A.F, Mechanical, electrical and corosion fault finding.

Total Experience of Eighteen, encompassing as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

To find a position where I can improve my pick, packing, Inwards goods, Despatch skills and operate as an effective team member to bring Success to myself and my team.

Oilfield Electronics/Instrumentation technician; excellent troubleshooting skills, analytical, hardworking, willing to learn new skills.

Heavy Lift / Rigging Superintendent, Rigging Engineer, Rigging Supervisor

Work well with others, Willing to become a leader, Able run Electrical Tools

Operation Manager for Corrosion Engineer & Inspector

My career within the Oil and Gas Industry has enabled me to develop experience in dealing with and handling clients, market research, project development, and maintaining business relations. Initially working in instrumentation, followed by process engineering.

Coiled Tubing Supervisor

Experienced Offshore Rigger

I have been working in the Petro-Chemical Busines for 25 +years( construction and maintenance.) I 've been a Supervisor, Superintendent & Project Manager. Heavy expirence in Piping ,Fabrication, Rigging, I have with all disciplines.I have worked in the U.S. and abroad.

Directional Driller w/ 13 years experience

Mechanical commissioning Engineer. HNC & ONC Mechanical Engineering. Experienced Project Manager,Supervisor and Technical Engineer.

Seeking a challenging position as a diesel technician and/or service technician in the Oil Field Services industry or other industries that require my technical and mechanical skills. To obtain more knowledge and room for advancement in this field, while working with a team that will continue to ch

Hold a valid Class 3 Singapore Driving licence, Hold a valid STCW 95 VI/1 Basic Safety Training for Fire Prevention and Fire Fighting, Fluent in written and spoken English, Proficient in Microsoft Office

Heavy Equipment operator/ Supervisor ready for a new challange

Crane Operator, worked offshore for 8 years. Qualifications include HLO, Rigging, First Aid, etc. I am confident & reliable with a flexible outlook to my work & a strong commitment to safe work practices. Extensive travel has given me the ability to develop a good rapour with local people

Refer below

"External foreign trade", English, French, native Russian, Norwegian, Business Correspondence, 2 years experience, advanced PC user, typewriting, purposeful.

•BSc in Engineering with 8 years of experience in Oil & Gas EPC and Communications industry. •Field support and Loop test coordinator for Petro-Canada RCP project site in Canada. •Excellent interface abilities with client/vendor management teams •Experience in preparing as-built data sheets, ins

I have multiple abilities varying on the job at hand. I have a high intelligence, combined with mechanical aptitude, it is easy to learn virtually anything. The ability to be sincere and read both vocal and body language helps me to communicate with the people I meet.

Offshore Production Operations & Offshore Construction Operations

Mechanical maintenance equipment of all types

Seeking for a position for a Ordinary Seaman where my skills, knowledge, training, and great work experience can help improve your company.

JIB

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

I have 8 years of mechanical/electrical maintenance in heavy industrial settings.

Qualified and Certified NCCCO Operator with all endorsements willing to travel

In-House/Field Landman/DOA/Lease Analyst/ROW Agent/Acquisitions-Divestitures

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

Completed grade 12 diploma, 2 months experience construction(framing), 2 months experience welding with aluminum, 9 months experience working at local Chevrolet dealership(oil changes, tire repaires, basic maintenence duties)

Experience on Natural Gas Drilling Rig

Qualified heavy diesel machanic

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

6G Coded Pipe Welder T.I.G.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Degree of Bachelor of Computer and Communication Engineering, and computer literate in windows and microsoft.

Oilfield Managment / Technical Advisor / Sales / Light Well Intervention Engineering

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

Journeyman Electrician looking to advance

I am a trained and experienced Steward with excellent Floorhand training. Security Clearance Canadian Government Enhanced Security Clearance *willing and able to relocate *Marine Medical completed March 3 2004

I am working as Plant Operator in Refinery & Petrochemical Units since last 08 years Reliance Industries Ltd. [Petroleum Division, 650 KBPSD crude processing capacity]

Senior/DCS Operator or supervisor Position.

15 years experience in construction, labor, maintenance and natural gas industries, holding positions such as Derrickman, Floor Hand, Motor Hand, Driller, Mason, Top Laborer, Sheet Metal Fabricator/Installer, Duct Board Fabricator, HVAC Installer, Roofer, Landscaper and Handyman.

Training in various safety, survival, and drilling courses to become a valuable asset to the oil and gas industry.

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out