Resume - More than 17 years experience in welding inspection and NDT testing. Main duties...

Misco Jobs

Resume #81107

CONTACT INFORMATION:
View contact information...

Professional Certification
: CSWIP Welding Inspector 3.1 TWI, UK.
Cert No: 30348
CSWIP Radiography Interpretation Level 2
Cert No: 32072
Ultrasonic Level 2 PCN -3.1,3.2,3.8,3.9
PCN No: 203430
ASNT Level 2 Radiography Interpretation.
ASNT Level 2 Magnetic Particle Testing.
ASNT Level 2 Dye Penetrant Testing.

Course Attended: CSWIP Welding Inspector 3.1 conducted by TWI
OIS Malaysia in-house course in UT, RT, MT,
PT and Eddy Current.
OIS Malaysia in-house course in Radiation
Safety.
Basic NDT Principles.
Malaysia AELB Level 2 Radiation Inspection.
Lost Prevention System (LPS) organized by
Exxonmobil Kuala Lumpur.
Offshore Safety, Sea Survival, Basic Fire
Fighting.
And Helicopter Underwater Escape Training
(HUET) at MAS/SEQU Training Center Kuala
Lumpur (expired).
H2S Basic Course.

Computer Literacy: Microsoft Word, Excel and Power Point.
Point of origin: Kuala Lumpur, Malaysia
Home Airport: Kuala Lumpur International Airport
Preferred work location: Malaysia
Salary: Neg.
Availability: One week notice

EXPERIENCE BACKGROUND

About 17 years been in the Oil and Gas Construction Industry for upstream and down stream works. Involved in erection, fabrication and testing of steel structural, piping (carbon steel and low alloy steel), pressure vessel, gas and oil pipeline, offshore laybarge, offshore platform upgrading work and new refinery plants.
Build up the career starting with Training QC Inspector for Structural, NDT and Piping works. Lately for the past 4 years been as General Inspector post for Petronas Carigali, Exxonmobil (EMDC), Reliance Industries of India and Murphy Oil of Malaysia. Mainly work scope are inspection, installation and erection, monitoring for steel structure/piping fabrication of topsides modules and jackets, refinery plants, vessel, pipelines, FSO and subsea structure, piping and pipelines.
Work Site – AY Engineering, Promet Fabricator, Sime Sembcorp Engineering and Malaysia Shipyard and Engineering all are located at Johore state. The other location were at Naval Dockyard and KHL Engineering at Lumut Perak, Geahin Engineering at Malacca, Kerteh Oil and Gas Terminal at Kerteh Terengganu, GPP 5 and 6 at Kerteh Terengganu, TNB Power Station at Kapar Selangor and LNG 1 at Bintulu Sarawak.
As a General Inspector, the work scope are depending on service contracts.
Scope of work briefly:
* Witnessed Welding Procedure Qualification Test and welder qualification test.
* Experience in welding inspection on piping materials such as Stainless Steel L316 and 304, Chrome-Moly and Incoloy.
* Reviewed all procedures including welding and NDT procedures.
* Able to read ISO, P&ID and GA drawings.
* Perform site quality activities in accordance with Project quality Plan.
* Work with QA/QC Lead to address Project Inspection requirements.
* Implement quality surveillance and inspection activities at construction site both for structure and piping.
* Undertake stage inspection and monitor production process for structure and piping.
* Review contractors and suppliers completion files for accuracy and adequacy.
* Attend and contribute to site and project technical meeting as necessary.
* Ensure materials (structure and piping) supplied meet the requirements of the project specifications.
* Follow the safety rules and practices and assist the site team in promoting site safety.
* Review factory acceptance test and on final quality check prior to shipment.
* Monitor and appraise suppliers and contractors Quality Assurance and Quality control activities.
* Provide early warning of potential quality problems.
* Set up personnel's for site team.
* Set up project QC work execution plan.
* Coordinate daily inspection activities for various discipline.
* Site QC surveillance during construction activity for quality control compliance verification.
Documents Review
Review the project documents such as Project Quality Plan (PQP), Inspection and Test Plan (ITP), QA documents procedure such as NDT procedures, welding procedures, welding consumables control, mechanical test, record of welder performance, IFC and as built drawings, flushing, hydrotest, reinstatement procedures, distortion control procedure, Arc burn control procedure and etc.

Management Involvement
Participated in weekly QA/QC meeting, monitor of NCRs and follow up the close out, keep the QC matters update to QA/QC Lead, give the QC input for progress report and update. Participated in Company/contractor internal audit programmed and problem solving on QC matters.

Code and Standard
Familiar with AWS D1.1, ASME 1X and V, API RP2X, API RP2W/2Z, API 1104 and ANSI B31.3.

Personal Touch
Strength - Teamwork, good communication and ability to analyze.
Expectation - Construction Supervisor and QA Engineer.
Hobby - Soccer and badminton.

Job Attachment Currently
March 2008 – Present
* Fabrication of Murphy Sabah Oil Company Kikeh Subsea Gas Pipeline End Termination (PLET) at Aker Kvaerner Yard Pulau Indah, Pelabuhan Klang, Malaysia.
Appointed as Senior Fabrication Inspector seconded to Murphy Sabah Oil Co.

Work Scope
Reports to Company Site Representative for job progress updating.
Close monitoring on construction and NDT progress base on client and project procedures.
Familiarize with applicable Codes, Standards and Client Specification and also reviewed the approved drawing for the project.
Monitor the QC matter accordingly as per ITP/PQP.
Close monitoring on construction progress structure and piping duplex stainless steel base on client and project procedures.
Coordinate work of the site inspectors.
Issuance of CAR/NCR and follow-up until close-up.
Keep CSR updated with actions and quality issues.
Highlight the issue on upfront stage.
Reviewed all welding certificates including WPS, PQR and welder certificates and also all welding equipments calibration certificates such as welding machine, backing and holding oven and also the PWHT machine.
Carried-out material receiving inspection both structure and piping duplex stainless steel (checked size, type and condition of the materials) and make sure received a copy of genuine Mill Certificates.
Checked the consumables size, type and condition. Incase Basic Electrodes make sure the electrodes were baked as per manufacture recommended. And also check batch certificate for TIG filler wire.
Monitor and carried-out fit-up inspection both structure and piping duplex stainless steel.
Monitor the pre-heating and checked the pre-heat temperature prior welding.
Checked the welding position, weaving size and welding parameter such as current, voltage and travel speed as per approved WPS both structure and piping stainless steel. For piping duplex stainless steel need to check also purging gas.
Checked the consumables and filler wire condition and storage.
Checked the inter pass temperature and make sure the inter pass temperature as per recommended WPS.
Checked safety during welding.
Monitored construction punchlist and line check, outstanding work to carry over and monitor close up.
Checked the cleanliness of the joints must free from spatter, oil or grease and checked the welder and joint identification prior to visual inspection and NDT.
Carried-out visual inspection on both structure and piping, witnessed NDT activities and reviewed RT films.
Monitor compiling of final documentations.

WORKING HISTORY BRIEFLY

May2007 – Feb2008 Fabrication of Reliance KG-D6 Subsea Structure and Piping for Reliance Industries of India at KHL yard, Lumut, Malaysia.
Appointed as NDT/Welding Inspector seconded to Bechtel PMC as a representative to Reliance Industries of India.

2006 –2007 Installation of Sumandak B Pipeline.
Baram pipeline replacement (Baram-A to Baram-G)
10km offshore pipeline replacement from MCOT to West Lutong platform at Sarawak Water Malaysia.
Installation of Sumandak-A platform and 10 km offshore pipe laying at Labuan, Malaysia.
Installation of Abu Cluster A jacket, topside and for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Terengganu water, Malaysia.
All of the above project were appointed as NDT/General
Inspector represented Petronas Carigali Sdn Bhd.

2005 - 2006 Fabrication of Jacket and Topside for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Ramunia Fabricator Bhd, Teluk Ramunia Johore, Malaysia.
Appointed as NDT supervisor represented Ramunia Fabricator Bhd Johor Malaysia.

2004 – 2005 Exxonmobil (EMDC) Producing Nigeria Oil (YOHO Topside Modules). Fabrication at Sime Sembcorp Engineering Pasir Gudang, Johore. Saipem.Sa as a main contractor (EPC-2)
Appointed as General Inspector represented Exxonmobil.

2003 – 2004 Exxonmobil (EMDC) Producing Angola Oil (Kizomba-B DrillingRig). Fabrication at Malaysia Shipyard and Engineering Pasir Gudang, Johore.Daewoo of South Korea as a main contractor (EPC-1).
Appointed as a General Inspector represented Exxonmobil.

2002-2003 Fabrication of Bintang-A and B Tripod Jackets and Topsides for EPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11DR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of JNDR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of Tapis-F Tripod Jacket and Topside for aEPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11P-A Topside, Modules, Living Quartes, Bridge and Flare Tower for Sarawak Shell Bhd at Sime Sembcorp PAsir Gudang Johore.
Fabrication of ANDP-C and E Tripod Jackets and Topsides for Petronas Carigali at Sime Sembcorp Pasir Gudang Johore.
Fabrication of YOHO Topside Development Project for Exxonmobil (EMDC) at Sime Sembcorp Engineering Pasir Gudang Johore.
All the above projects work as Ultrasonic Inspector
Represented Sime Sembcorp Engineering Pasir Gudang
Johor, Malaysia.

2001-2001 MTBE Propylene Plant at Kuantan, Pahang. Work as Ultrasonic Inspector on the Annual Shutdown represented MTBE Kuantan Pahang, Malaysia.

2001-2001 Installation of South Furious Barton Compression Module for Sarawak Shell Bhd at Sarawak offshore. Work as Structural QC Inspector represented GLOBAL/TL Offshore.

2000-2000 Fabrication of ANGSI-A Topside, Living Quarters and Modules for Petronas Carigali at Sime Sembcorp Pasir Gudang, Johore.
Work as NDT Coordinator represented Sime Sembcorp Pasir Gudang Johore, Malaysia.

2000-2000 Installation of ANDR-A Platform for Petronas Carigali at Terengganu offshore. Work as General inspector represented Petronas Carigali.

1999-2000 Fabrication of Resak Onshore Gas Terminal for Petronas Carigali at Kerteh Terengganu. Work as NDT Inspector represented Petronas Carigali.

1998-1999 Fabrication of Resak Branang Topside, MSF and Living Quarters for Petronas Carigali at Sime Sembawang Engineering Pasir Gudang, Johore. Work as UT Inspector represented Sime Sembawang Engineering Pasir Gudang Johore, Malaysia.

Fabrication of Anding-A Tripod Jacket and Topside for Petronas Carigali at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as UT Inspector represented MSE Malaysia.

1998-1998 Fabrication of Hong Kong Airport Structure at Geahin Engineering Sdn Bhd Malacca. Work as Ultrasonic Inspector represented Geahin Engineering Sdn Bhd.

1996-1998 Fabrication of Container Cranes at Naval Dockyard Lumut, Perak. Work as a 3rd Party Surveyor for Bureau Veritas Kuala Lumpur.

1995-1996 Fabrication of ASME Code Pressure Vessel at Taylor Wharton, Shah Alam Selangor. Work as NDT Coordinator represented Taylor Wharton Shah Alam.

1995-1995 LNG 1 at Bintulu Sarawak Annual Shutdown. Work as Eddy
Current Technician testing Exchanger Tubing.

1994-1995 Fabrication of Seligi C and E Jackets for EPMI at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as QC Inspector represented MSE Johore.

1993-1994 Fabrication of M1 Living Quarters for Sarawak Shell Bhd at Promet Fabricator Teluk Ramunia, Johore. Work as Structural QC Inspector represented Promet Fabricator, Malaysia.

1992-1993 Fabrication of Tembungo-A Jacket and Topside for Petronas
Carigali at AY Engineering Teluk Ramunia, Johore. Work as
Training Structural QC Inspector represented AY Engineering.

1991-1992 Fabrication of piping and structural work (spherical tanks) for
Mechmar Keppel Engineering Sdn Bhd at Klang Port Selangor. Work as NDT Trainee (UT,RT and MPI) represented Mechmar Keepel Engineering Sdn Bhd, Malaysia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1484)

Go to Search Parameters...

Brief Description

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

Heavy Equipment Operator

Radio Operator Offshore

Welding Inspector/ Qa Qc Inspector

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Well testing Senior Operator.

Rig mechanic, rig technician

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

Oil/gas/water/wastewater electrical

Industrial Electrician/Instrumentation Technician with Linesman training

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Hydrocarbon Exploration and Development

Precision Drilling since Feb 2002, various knowledge in drilling different kinds of wells as well as downhole tools. I posses a excellent safety record. I have the ability to learn new jobs very quickly and throughly.

Regional Senior Account and Sales Manager with 9 years accomplished career track throughout the industry delivering and sustaining revenue and profit gains within highly competitive South East Asia Market. Exceptional communicator with a consultative sales style, strong negotiating skills, exception

Safety Engineer

E&I QA/QC Inspector, Certified QMS Lead Auditor, Having Oil&Gas onshore and offshore experience

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

Certified Rigger, Welder helper, and Forklift driver.

Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.

Critical Care Paramedic

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Instrument supervisor / technician v exp construction commissioning start up HSE

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Employment history with over 15+ years oil and gas exploration experience.

Field Machinist/Millwright

NDT Inspector-oilfield equipment

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Electrician - Construction

Experienced trainee driller, compitent derrickman, expiernced floorhand and roustabout with strong workover experience.

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out