Resume - In response to this, please consider my PROJECT BASED resume for Instrumentation...

Misco Jobs

Resume #81509

CONTACT INFORMATION:
View contact information...

I have over 18 years in the oil and gas industry. Many of the on the job skills have been obtained through large and small capital projects with the importance of timely and orderly completion.

Over 15 years in Engineering Design including specification of:

* Field Instrumentation
* Process Measurement Technology
* Pressure / Flow / Temperature / Level / Others
* Control valves / On-Off valves / ESD valves
* Analyzers Sampling and Conditioning Systems / Analyzer Shelter / Building
* Installation details / Winterization / Drafting and CADD Standards
* Wiring and Loops
* Instrument & Controls Construction Turnover inc. Pre-Commissioning and Commissioning

PROFESSIONAL MEMBERSHIPS AND AFFILIATIONS

* Alberta Society of Engineering Technologists (Since 1991 – Current Membership)
* Woolsey Instrumentation & Design Ltd. (Contract Designer / Technologist)

EDUCATION

1987 Industrial Instrumentation Technology - S.I.A.S.T., Moose Jaw, SK.
1994 – 1992 A-B Rockwell PLC-5 Applications I, II, III & IV - S.A.I.T., Calgary, AB.
1994 Electrical Code and Applied Theory - S.A.I.T., Calgary, AB.
1996 - 1995 Distributed Control Systems I & II - S.A.I.T., Calgary, AB.
2001 E125 Process Analyzer & Sample Handling System Design – ISA, Edmonton, AB.
2004 - 2005 Foundation Fieldbus Certification INST 110/115/117 – S.A.I.T., Calgary, AB.
2007 SIL (Safety Integrity Level) Determination Leadership Workshop, ACM, Calgary, AB.

FIELDS OF EXPERTISE

* Ensure that installations meet service conditions and calibration procedures are followed, adhering to safety and quality (ISO compliant). Install, calibrate and document field instrumentation for oil, gas and mining facilities.

* Initiate Instrument Data Sheets (Primary Element Sizing - Flowel, Final Control Element Sizing - Fisher's FirstVue), Bill of Materials, Scope of Work, Instrumentation Drawing Schedule, P&ID and Instrument Index (Intergraph INtools and MS Access) preparation in accordance with project procedures. Process analyzer implementation including sample handling systems, conditioning and sheltering.

* Prepare loop wiring, PLC I/O schematics and interconnecting network topology to the client's desired Control System Architecture.

* Technical review (Including Safety Instrumentation Analysis as per ISA's S84 Standard) and instrumentation design of P&ID's with logic/control narratives for establishing safe operating procedures.

PROJECT WORK HISTORY:

November 23/2007 to February 20/2009
Suncor Sustaining Projects Group- Suncor Oil Sands and Firebag Facilities
WorleyParsons MEG - Engineering Consulting - Calgary, AB

* Lead instrument and controls engineer for Plant Sustaining projects within Suncor's Oil Sands Base Plant, Millenium Plant, and Firebag Stage 1 (Plant 91) & Stage 2 (Plant 92) facilities.

* Developed Fire Alarm Systems Criteria for Plant 21 Oil Sands South Tank Farm VRU addition utilizing existing Honeywell XLS-1000 FAP integration complete with new deluge detection.

* Developed small capital projects utilizing Delta V Foundation Fieldbus (FF) control system architectures (segment verification) for Firebag Plant 91/92 Vapor Recovery Units, Honeywell TDC 3000 control system architectures for Oil Sands Base Plant 21 Vapor Recovery Unit, Triconex Safety System Architectures within Suncor's Base Plant and Plant 92, and migration of Delta V SIS Logic Solver architectures within Plant 91 Fieldbus carrier backbones.

* Assisted in the Plant 5 Gas Oil Coker overhead and main tower expansion modifications 2007 Base Plant turnaround, field engineer responsible for turning over instrumentation and controls to Suncor client.

October 1/2006 to November 23/2007
Vankor Oilfield Development - Pumping Station and Associated Equipment Projects
VECO Canada Ltd. - Engineering Consulting - Calgary, AB

* Instrument and controls engineer, assisted in developing Engineering Design Specification (EDS) for Russian oil pipeline.

* Assisted in developing Smart Plant InTools Data Sheets and Foundation Fieldbus architectures at EDS stage of project.

November 11/2005 to October 1/2006
Inter Pipeline Fund - Bow River Pipeline & Cold Lake Pipeline Expansion Projects
VECO Canada Ltd. - Engineering Consulting - Calgary, AB

* Instrument and controls engineer, specified instrument commodities and controls equipment (AB PLC-5 and Modicon Quantum Architectures). Lead designer for installation details and PLC I/O drawings.

* Lead Design and Controls Technician for AB PLC-5 RSLogix programming and field implementation for Phase 1 Wolf Lake site (2 x 800 HP Mainline Pumps).

* Lead Designer for Wolf Lake Station's 1 x 300 HP Boosters, 285 m3/hr capacity PD custody transfer meter, La Corey Station's 3 x 1500 HP C5+ condensate mainline pumps and 1 x 350 HP Booster pump.

July 25/2005 to November 4/2005
Saudi Aramco – Shaybah Gas Oil Separation Project
SNC-Lavalin Inc. - Engineering Consulting - Calgary, AB (FEED Portion Only)

* Senior instrument engineer, developing Fieldbus and ESD architectures within P&ID (Instrumentation only) development for FEED (Front End Engineering Design) portion only of max. 750000 BPD GOSP facility. Use of InTools software for establishing FF/conventional I/O and Data Sheet development for FEED portion only.

June 9/2004 to July 1/2005
National Iranian Gas Company - Tabnak Train II Inlet Gas Sep & De-Hydration Project
Kvaerner Process Systems Canada - Engineering Consulting - Calgary, AB (Supply Contract Only)

* Senior instrument engineer, design and selection (competitive bid) of instrument commodities including sizing Flow Elements (InstraCalc), PSV's (Farris's SizeMaster) and Control Valves.

* Design of Instrument Installation Details, specification and instrument technical notes preparation prior to purchasing instrument commodities.

March 12/2004 to June 8/2004
PetroCanada Edmonton Diesel Desulphurization Project
Bantrel Co. - Engineering Consulting - Calgary, AB

* Placing instrument components in the 3-D Rebis generated model and preliminary detailed design of installation details.

December 15/2003 to March 11/2004
CNRL Horizon Oil Sands Project
Bantrel Co. - Engineering Consulting - Calgary, AB

* Engineering Design Specification (InTools Data Entry, Fire & Gas, Installation Details and P&ID Development) for Unit 41 NHT, Unit 42 DHT and Unit 43 GOHT.

July 9/2002 to December 15/2003
Suncor Millennium Vacuum and Coker Unit, Plant 57 and 52 Units
Bantrel Co. - Engineering Consulting - Calgary, AB

* QC/design/selection of instrumentation field commodities for Suncor Millennium Vacuum Unit.

January 21/2002 to July 5/2002
Shell Athabasca Oil Sands Project, Shell Scottford Refinery, Ft. Sask., AB
Athabasca Construction Joint Venture [ACJV] - Site Engineering Work Site

* Instrumentation Field Engineer responsible for 261 Tank Farm, 285 Interconnecting Pipe Rack, Rail Car Loading/Unloading and Acid Gas Flare/Vapor Combustion Unit.

* Duties included inspection of process installation of instruments and electrical terminations, answer technical queries with respect to E/I instrumentation, witness continuity and function checks on instrumentation, document deficiencies and non conformances with respect to instrumentation and perform final inspection on mechanical/electrical installations prior to turnover to the owner.

March 12/2001 to January 18/2002
Shell Athabasca Oil Sands Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* QC/design/selection of instrumentation field commodities and QC of loop wiring (Foxboro I/A) for Shell AOSDP COGEN /Water Treatment/Tank Farm including installation details associated with field instrumentation.

July 11/2001 to August 30/2001
Ultramar Golden Eagle Refinery, Bechtel Martinez, CA (Various Bay Area Refinery Projects)
Bechtel - Engineering Consulting – California Office

* QC/design/selection of instrumentation field commodities for Bechtel Martinez, CA Ultramar Golden Eagle Refinery (existing plant) H2 Compressor K.O. Pot Upgrade (500 gallon slug) and install details for Crude NOX Furnace Project.

January 16/2001 to March9/2001
NOVA Chemicals Plant – Poly Flare Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* Instrumentation QC/design/selection of instrumentation field commodities and field wiring for Nova Chemicals Joffre Site (existing plant), Poly Flare Upgrade.

October 30/2000 to January 5/2001
Anadarko Canada Corporation's Jean Marie Well Sites Project
Equinox Engineering - Engineering Consulting - Calgary, AB

* Design/selection of instrumentation field commodities for Anadarko Canada Corp.'s Jean Marie Well Sites (1.5 MMSCFD per 9 well average).

October 30/2000 to January 5/2001
Purcell Energy Ltd.'s Ft. Liard F-25A Well Site Project
Equinox Engineering - Engineering Consulting - Calgary, AB

* Design/selection of instrumentation field commodities for Purcell Energy Ltd.'s Ft. Liard F-25A Well Site (15 MMSCFD for 30 MMSCFD future for single gusher well). Assisted in writing logic and control narratives for Purcell Energy's F-25A well site, Anadarko's Jean Marie well site.
June 12/2000 to October 26/2000
Mobil Oil's Carson Creek Gas Production Revamp Project
Optima/Ramco - Engineering Consulting - Calgary, AB

* Design/Selection and sizing of Foundation Fieldbus (Delta V) related instruments for Mobil Carson Creek Gas Production Facilities (existing plant) inlet expansion of 500,000 m3/day.

June 14/1999 to June 2/2000
Nova E3 Projects, Joffre 2000 Project, Joffre, AB
Fluor Construction – Site Engineering

* Instrumentation Field Engineer responsible for E3 Ethylene Furnace Feed (7 Cracking Furnaces capable of producing 150,000 lbs/hr of SHHP steam), Utilities (1500 ANSI BFW Electric and Steam Pumps) and Flare areas.

* Duties included inspection of process installation of instruments, answer technical queries with respect to instrumentation, document deficiencies and non conformances with respect to instrumentation and perform final inspection on mechanical/electrical installations prior to turnover to the owner.

Feb 23/1998 to May 28/1999
Nova Offsites Project, Joffre 2000 Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* Instrumentation Area Lead Designer responsible for the selection of instrumentation commodities based on price, quality and functionality. Duties included the IFD/IFC instrumentation mark-up of P&ID's for C3/C4/AC/PFO Rail Car Loading, SM / FC / TEA Unloading and Co-Product Storage for Nova/Amoco offsites.

July 29/1996 to November 28/1997
Novacor Joffre Petrochemical Plant Site, Joffre, AB
Behalf of Novacor - Joffre Plant Site Engineering

* Instrumentation Designer responsible for the design of small capital projects, existing pipeline, existing ethylene trains 1 and 2, and existing polyethylene plant.

January 2/1996 to May 7/1996
Fording Coal's Coal Mountain Upgrade Project, Sparwood, B.C.
Kilborn Engineering – Coal Mountain Site Engineering

* Instrumentation Engineering Technician assisting E/I supervisor during construction and pre-commissioning.

January 2/1996 to May 7/1996
Fording Coal's Coal Mountain Upgrade Project
Kilborn Engineering – Engineering Consulting - Calgary, AB

* Design of Instrumentation Panel Layouts (Additive panels and Marshalling Racks), Loop Wiring (Yokogawa DCS) and specification of instrumentation commodities. Able to participate in the successful production of metallurgical and thermal coal to this revamp.

January 17/1995 to December 15/1995
Du Pont's Hydrogen Peroxide Upgrade Project (Ft. Saskatchewan, AB)
Fluor Daniel - Engineering Consulting- Calgary, AB

* Assist design of Electrical/Instrumentation layouts, Loop Wiring (Interconnecting wiring from J.B. to Marshalling Rack for Fisher Provox DCS). Assist design/CADD of ESD Shutdown Systems (Hard Wired), estimation of material, wire and cable, raceway systems (tray cable) for Electrical/Instrumentation and Material Take-Off's for Du Pont's Hydrogen Peroxide Facility.

June 20/1994 to January 15/1995
Novacor Joffre Petrochemical Plant Site, Joffre, AB
Behalf of Novacor - Joffre Plant Site Engineering

* Completed E/I design packages from front end/estimation to detailed scope of work, and provided programming documentation for DCS (TDC 3000) and PLC (A-B PLC-5). Vendor reviews of pelletizing equipment and machine monitoring (Bently Nevada).

April 11/1994 to June 18/1994
PanCanadian Field SCADA Project
Kenonics - Engineering Consulting - Calgary, AB

* Assist design/drafting (AutoCAD R.12) of Electrical/Instrumentation for Speed Pick-up modifications to Deep Gas Compressor Stations, RTU Layout, I/O cabinet and RTU (Fisher ROC) panel wiring.

June 4/1993 to April 8/1994
Mobil Oil Limited Head Office
Behalf of Mobil Oil - Engineering Consulting - Calgary, AB

* Assist design/drafting of Motor Control wiring, MCC layout, 120V/Lighting layouts and P&ID's/PFD's for gas and oil gathering sites.

May 6/1991 to December 9/1992
Shell Caroline Gas Gathering/Sulfur Forming Project
SNC-Lavalin - Engineering Consulting - Calgary, AB

* Assist design and drafted (AutoCAD R.11) Location Plans, Installation Details and Loop Wiring (Modicon PLC's).

January 2/1990 to April 19/1991
Lloydminster Heavy Oil Upgrader Project
Kilborn Engineering – Engineering Consulting - Saskatoon, SK

* Instrumentation design of Instrument Location Plans, Installation Details and Loop Wiring (Foxboro I/A).

July 15/1987 to December 22/1989
Consumer's Co-operative Refinery, Regina, SK
Consumer's Co-op Employee - Plant Site Operations

* Operations Technician for the Saturated Gas Plant, Distillate Unifiner, Light Naphtha Unifiner, Penex, Delayed Coking, Gas Concentration (cooling water), Polymerization and Sulfur Recovery units. Instrument technician during instrumentation re-vamps of the old Crude and Cracking units with changeover to new Taylor DCS from old pneumatic control.

COMPANY / VENDOR SPONSORED EDUCATION:

2009 H2S Alive & First Aid Level C CPR – Flatline Response Inc., Calgary, AB.
2007 InTools Ver. 7.0 (Advanced – Smart Loop / Fieldbus / Intrinsically Safe Circuit
Design ) – Intergraph, Calgary, AB.
2005 WHIMIS – Kvaerner Process Systems, Calgary, AB.
2002 AutoCAD 2002 Update – ASCENT, Calgary, AB.
2001 Fundamentals of Process Gas Chromatography – Spartan, Edmonton, AB.
FieldVue Digital Instr and 275 Handheld Comm.– Spartan, Edmonton, AB.
1998 A-B ControlNet and RSLogix Day Course - Westburne Electric, Calgary, AB.
Modicon Concept and Quantum Day Course - Guillivan Electric, Calgary, AB.
1995 Fundamentals of MicroStation 95 and IDM - Nova Chemicals, Plant Site (Joffre)
Fundamentals of Compressor Shutdown Systems - Spartan, Calgary, AB.
Loop Tuning/Commissioning Course - A.S.E.T., Calgary, AB.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1484)

Go to Search Parameters...

Brief Description

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible

Instrument Engineering, Fire & Gas Engineering

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

The professional profile of a physicist is one of the most varied and extensive. Physicists learn during their studies, strategies for solving problems and issues as quickly and efficiently. Following this training the physicists can work in a universal (almost) any professional area.

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Project Engineer

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

Well experienced mechanic worked on wide range of plant with good references have documents ready for work permit should you be interested let me send you my cv in browse format

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

CIPS qualified MSc MBA MCMI graduate, Oracle, negotiations, IT, tendering, software licensing

Diamond driller / Truck driver

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

maintanance,welding,supervisor,fork lift,fabrication,roustabout,

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

I have 8 years extensive Coded Welders experience in Hydr Industry. I also did a Welding Inspectors Course Level 1 in 2007. I do however not have any experience in Off Shore Ind, but I am very eager and willing to learn.

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

my resume consists on my career on my trade of electrician. I send this resume to apply the position of rig service electrician.

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

24 years in oilfiled \ Safety Rep.\ EMT

Experienced Design Engineer

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am a licensed Heavy duty mechanic trained and certified in Canada. I have extensive oil field/drilling experience. I am trained in Caterpillar natural gas compression products. I have extensive supervisory experience as well.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

Channel sales, Institutional sales, Oem sales, Business development, International sales

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out