Resume - I am a hard worker, dedicated, a team player and can work under pressure and wit...

Misco Jobs

Resume #81511

CONTACT INFORMATION:
View contact information...

SUMMARY OF STRENGTHS
Mechanical Technician/Supervisor with over 20years of experience in petrochemical and manufacturing facilities. Mechanical Technician with overhauling and modifying pumps, maintenance on Compressors, Diesel and Gas Engines, Steam Boilers, gearboxes and various production related equipment. Technical Advisor for Petroleum products, Grease, fuels, oil and spill control. Trained as Shutdown Supervisor, OTP trainer & Assessor, Computer literate (Excel, Powerpoint, Word, SAP R3/4.7, E1 Enterprise, JDE, etc. Customer Centered Service experience, Maintenance Planning and HSEQ procedures. Done projects on various platforms and LPG FPSO.

PROFESSIONAL EXPERIENCE
CHEVRON, Malongo, Angola

Mechanical Advisor, Special Projects. (Baker OTS, Contractor) 2007- 2009

Technical support with ownership of various mechanical equipment in the production of oil and LNG. Mechanical equipment included Compressors (Sullair, Ingersol Rand), Oil, Gas and water coolers, Plate Heat Exchangers (Alfa Laval), Diesel Engines(Cat), Gas Engines(Waukesha, Cooper), Pumps (Sulzer, Sundyne, KSB, Orbit etc.), Mechanical seals( John Crane, Chesterton, Burgman) and Turbo Expanders.
Mechanical Technician with troubleshooting, bad actors and overhauling large production equipment capabilities. Areas of responsibilities included, offshore and onshore installations, training and managing of nationals, buying of spares, E1 management, writing HSEQ procedures and adherence, (Toolbox talks, PTW systems, LOTO)
Perform reliability improvements on pumps, diesel and gas engines, mechanical seals, etc. Leveraged reliability Predictive Preventative Maintenance (PPM) efforts across operational units; supervised unionized multi-craft maintenance personnel and completed capital projects less than $5M with company and contracted employees.

Reason for leaving: Contract ended: Expats had to be reduced due to nationalization and global financial crisis.
ACCOMPLISHMENTS.

* Installed three water coolers in three days saving the company, $50000.00, down time and expenses on man power.
* Coordinate and created MOC the installation of a new Air Receiver and Sullair compressor saving $50000.00
* Reconditioned a G379 Caterpillar engine saving $20000.00.
* Coordinate Cooper overhaul project worth $300000.00 successfully.
* Removed and installed a G342 Caterpillar engine and radiator saving $20000.00.
* Aligned Reciprocating compressor on a FPSO saving of $20000.00, specialists quote were rejected, by management.
* Changed nozzles on Turbo Expander, job done by specialists normal practice. $15000.00.
* Removal and Installation (base) of a 342 Caterpillar standby engine with generator. „X All project packages onshore and offshore, included JSA, Mitigation Plan, Work Scope, Job Plan, and have been approved by Senior Management.

PetroSA, Petroleum South Africa (GTL Refinery & Offshore Platform)

Mechanical Technician 2003-2007

Mechanical Technician responsible for daily rotating equipment reliability, maintenance and machinery in petrochemical applications. Experienced in unit de-bottlenecks, turnarounds, extensive troubleshooting skills and pump overhauls. Areas of responsibility, water treatment facility, steam generation plant, Tank farm and call outs on refinery. Offshore platform, FA Platform, did day to day maintenance and shutdown. Mechanical Supervisor when required.

Reason for leaving: Overseas opportunity. (oil and gas industry)
ACCOMPLISHMENTS:

* Mechanical contact for daily operation and turnaround contact during $500000.00 plant turnarounds.
* Centrifugal and reciprocating pump reliability and overhaul technician with tasks including the maintenance on steam boilers.
* Converting various pump gland packing to mechanical seals. $5000.00
* Laser Alignment on cooling fan shafts of over 3 meters long. $5000.00
* Refurbishing of Regent tanks savings of $10000.00.
Coordinator of GE Steam Turbine 110MW overhaul.

Saldanha Steel: Steel Manufacturing:

Mechanical Expert 1995-2003

As a mechanical expert my responsibilities were daily day to day maintenance on various rotating equipment, Centrifugal and reciprocating pumps, gearboxes, Plate Heat Exchangers (Alfa Laval), Cooling fans, etc. Commissioning coordinator, punch listing inspector and maintenance contact between company and contractors.
Reason for leaving: Mechanical Technician position offered and an opportunity to complete N6 Mechanical Engineering studies.
ACCOMPLISHMENTS:
* Qualified as a Maintenance Boilermaker (3 year apprenticeship)
* Commissioning coordinator and a member of the startup team for a $7000000.00 steel plant.
* Mechanical contact for daily operation and turnaround contact during $50000.00 turnarounds.
* Converting various pump gland packing to mechanical seals. $5000.00
* Laser Alignment on cooling fan shafts of over 3 meters long and various pumps.
* Maintenance and modifications on RO Plant „X Mechanical Contact for the installation and start up of only three Brine concentrators in the world.
* Pump installations and ratings of various sump pumps on the water plant..

ADE, Atlantis Diesel Engines

Operator, Quality Inspector, Mechanical Fitter 1988-1995
Operator duties: Machine diesel engine components as per specifications and be productive. Quality Inspector duties: Inspect components with various calibrated measuring equipments, document, recommend solutions, educate operators on quality expectations and adherence to quality codes. Mechanical Fitter duties: Day to day maintenance and shutdown on various machinery, etc. CNC, gearboxes, pumps, Coal Steam Boilers.
ACCOMPLISHMENTS:

* Qualified as a Mechanical Fitter. (4Year Apprenticeship)
* Mechanical contact for daily operation and turnaround and tool changes.
* Acting as production and quality supervisor when required.

Reason for leaving: Contract ended: Training Agreement:

EDUCATION
* High School Graduate.
* Qualified Mechanical Fitter (Red Seal)
* Qualified Boilermaker (Red Seal)
* N6 Mechanical Engineering.

CERTIFICATIONS
* HUET OFFSHORE SURVIVAL (2008-2011)
* CHEVRON H2S & Swing Rope Certification
* CHEVRON Trade Qualifier
* International Vaccination
* SAIT Lubrication Engineering
* Machine Vibration Analysis 1 Practical
* Practical Boiler Plant Operation
* Garnott Cross Hydraulics Principles and Design
* Oil Analysis Beginners and Advance
* Shutdown Supervisor skills
* Life Cycle Costing
* Customer Centered Services
* Microsoft Excel I, II, III

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 1485)

Go to Search Parameters...

Brief Description

Safe Operation of Cranes to 300 Tons

Maintenance, troubleshooting, and repairs @ plants, boosters, etc.

My qualifications appear to be in line with your requirements: - Over fourteen years of successful experience - Extensive experience with PDS, Plant view, Micro station and AutoCAD software - Strong background as a Lead and Senior Designer

14 years Oil & Gas Industry experience in electrical maintenance, Low Voltage and High Voltage, normal and hazardous areas, on-shore and off-shore, grounding systems, UPS´s , PLC´s, engines ignition systems, heat tracing, HVAC. General acknowledge in Process and Instrumentation.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

* 25+ YEARS EXPERIENCE IN THE OIL & GAS INDUSTRY * PAST MANAGMENT POSITIONS * CERTIFIED INSTRUCTOR OF VARIOUS SAFETY COURSES

Drill Stem Testing, Downhole Tool Supervision, Packers, Open-hole, Cased-hole, Driller, 4-Point Testing, Heavy Industrial Manufacturing, Computers, etc. These are just some of the areas in which I have a solid background in.

I am a Journeyman Heavy Duty Mechanic with supervisory experience. I am looking for overseas employment preferably contract work. I have some computer skills which include MS word, excel, access. I have developed and implemented preventive maintenance programs which proved very successful.

Extensive Oilfield knowledge and experience in all categories of more than 20 years. Worked offshore for the last 15 years as a crane operator but am not limited to that.

I`m seeking employment overseas and have extensive experience as a Heavy Duty Mechanic.

Certified ASME welder, First Aid and CPR. Military veteran. In-depth experience with supervision and management. Experienced with heavy machinery, vehicles, electrics, hydraulics, plumbing, fabrication, offshore welder on a jack-up ship, shipfitter, hardware retail and laundry machine repair.

I have received recognition for my personal work Ethics and I work well with people. I'm looking for employment in the Diving industry or Offshore Drilling Rigs. I believe I have good broad range of skills that may of value to an Employer.

Available 7/7 days as I'm single. Free like a bird. Highly self-motivated, open minded, easy communication with people, dynamic, patient, courageous, sense of initiavtive, responsible, and persistent.

Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.

Accomplished boilermaker/welder. My recent jobs have included high pressure pipe welding, building one gigawatt wind field towers, new ski lifts and towers, in addition to retrofitting older ones.

Highly motivated candidate with geochemistry background, looking for first job in industry. Excellent computer and communication skills.

I am a hard worker, dedicated, a team player and can work under pressure and with the minimum or no supervision. I am searching for any available position that fits my qualifications, such as Mechanical Supervisor, Maintenance Planner, Mechanical Advisor, Mechanical Fitter, Project Coordinator, Shut

Engineering graduate with MBA having about 2 decades of experience in developing and administering Contracts in Oil& Gas, Petrochemical and Engineering fields. Skills include Strategy development, Risk analysis, develop Contract documents, Evaluation/negotiation and award, Contract management.

My skills are workin safely hard and long hours in the oil and gas ind

An experienced pipefitter, spent at least 10 years in the pipefitting trade. Have worked in Marine, Petro/ chemical and commercial sectors. Served and completed a 4 year pipeworkers apprenticeship and obtained various qualifications and experience. City and guilds, Canadian Red Seal, B-Tech and NVQ

Free! field engineer possess floor and field experience in heavy gas turbine engines such as General Electric different model (GE Frame 5, 6, 7 and 9), Rolls Royce, Siemens and Mitsubishi.

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

Drilling w/ compound drive-kelly drilling Rig, Rig up Rig down Drilling Rig, Use of Directional tools, instruments, Some Exp. Diesel electric rigs, Well control procedures, Gas Plant Operations

Over 9 years experience in the drilling industry. Acquired both domestic and international drilling knowledge, acquired numerous skills in the petroleum, gas, geo-thermal exploration and gas storage and industry while working for several contractors. I have gained experienced in all types of wells

Rotating equipment mechanic with 13 years experience is available for immediate interviews.

Hold mater unlimited license 3000 GT. Certified rig move master by John Lebhourihis and associates.Offshore experience 19.5 years on 3 independent jack ups as barge captain.Experienced in ship's hull and preload tanks steel repairs

Re: Application for Employment as a Roustabout/ Roughneck I am willing to start at the bottom and work my way up within your organisation. I am prepared to work anywhere in the world.

Next Generation Tool Pusher / Driller. Experienced in rig building, drilling, completions, and work over. Supervising and training of new employees domestic and international. Excellent leadership skills

23 yrs experience on the oil and gas industry , worked from oil production to downstream processing in both the maintenance and operations roles , skills include supervisory postions , commissioning, training ,plant startup, mentoring,maintenance cordination ,company representitive,PTW systems

Hardworker, Flexible, can work under pressure

Rig Mechanic

I love working in the oil field. I have been in it for 11 years and have a brode range of experience

Documentum 5.3, DDMS (Digital Document Management System), Electronic Filing System, Library Automation, Develop Library Web Page through Frantpage, Develop Information Portal In-house

My main areas of expertise are negotiations, sales and account management. I have worked for many years as an entrepreneur being responsible for all operations in the Benelux region. So, business development experience is an essential part of my assets.

I have 19 years of oilfield experience most recently on 30000ft wells in areas of high pressure and high H2S. My familiarity with many rig types and conditions and ability to work without direct supervision makes me an asset to any progressive drilling company.

I have very good experience of working on rotary and static equipments.i have worked on planned preventive/predictive maintainence as wllas handelled emergency shutdowns.i am capable of working independtly & can provide leadership to group of workmen.I am aware of the importance of SAFETY .

1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES

Career petroleum E&P, Refining, Laboratory, Technical, Management, Administrative, Patents, Contracts, Sour Gas, Start-ups, Debottlenecking

efficient deck maintenance,steering a ship,maintaining watch duties,good communication skills and qualification 10+2(physics,chemistry,maths,computer science)

Electrical techinician work on FPSO/Rig and power plant

Working Offshore as an engineer and mechanic for 15 years

Industrial Journeyman Electrician-28 years

strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training

Wide experiences in Occupational Health, Safety and Environment, advisor to the employer on the measures taken in the interest of the safety and Health of persons employed in the place of work. Inspect the place of work to determine whether any machinery, plant equipment substance.

Motor Rewind Techinician

I am highly motivated, self-starter, team player and resourceful. I have worked in harsh conditions and adapt easily to any situation. I have just finished working in Iraq on the RIO recover Iraq Oil project for KBR. Prior to that I worked in Chad on the ExxonMobil Oil Recovery Project.

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and ran pipe. Train others on PDMS.

7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00

Hand Millwright in Boiler Area there my responsibilities are Erection of forced Draft Fan and Fuel Gas Recirculation Fan

Seeking an opportunity in industrial painting where I can apply my past work experience and be an asset to the company.

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out