Resume - Experienced Work Over & completions wellsite Supervisor, safety orientated, Wel...

Misco Jobs

Resume #81620

CONTACT INFORMATION:
View contact information...

Re: Employment Well Site Testing/Drilling/Work Over/Completions Supervisor

Good Day to You. I am looking for a Well Site Testing/Drilling/Work Over/Completions Supervisor position. I have been in the oil and gas industry for 16 years as a Well Site, Work Over & Completions Supervisor and Service Leader. I believe with my experience and training I would be a valuable asset to your company.

I have experience in all work over, completion and well site supervisory aspects including and not limited to Logging, Perforating, Coil Tubing, Snubbing, Fracing, Cementing, Wireline, Slickline, Well Testing, Heli Portable Services and Project Coordinating. I have a very good knowledge of Well Testing in the proper data acquisition of well bore fluids including gas raids, volume of fluids and separation techniques. I have dealt with ground manifolds, positive and adjustable chokes. I have rigged in lines for proper flow to fluid tanks & gas separator. I have very good communications skills with engineers, other well supervisors and my fellow coworkers. I always complete a job to the best of my abilities and have been a respected leader from my fellow co-workers.

I am very safety orientated and very good at maintaining a companies HSE policies. I am very proficient, responsible and can deliver outstanding results on completing work over, completions, well site duties on time and on budget. Plus, I am able to mobilize equipment from location to location quickly and safely. I have completion experience with high pressure and deep wells for rig and rigless operations. I have extensive experience working in an H2S environment and have all necessary tickets, such as Well Service Blow Out Prevention, PST (Petroleum Safety Training Program) IRP #16, Standard First Aid etc... If needed I am more than willing to get any other necessary tickets required.

I have become a well-rounded individual and can take on any task given to me. I am self-motivated and eager to learn new procedures and processes. I welcome any challenges that come my way and I take pride in getting a task done.

I would be happy to accept any of the positions with your company. If you have any questions please phone 918-548-0853. Thank you for your time. I am available immediately and willing to relocate.

* Employment *

2007 – Present, Plaster & Wald Consulting, Mustang, Oklahoma.
Work Over & Completions Supervisor – Analyzed clients needs and provided recommendations on the efficient use of personnel and equipment. Advised on Well planning and Drilling, Completion; Preparation and Cost Analysis and Consulted on Deep High Pressure Drilling and Well Site Testing. Provided Well Site Testing, Work Over and Completions Supervison for such clients as:

PetroHawk (Louisiana)- Provided work over & completions on horizontal & vertical wells for PetroHawk in Bossier/Shreveport Louisiana. Duties included:
- Vertical Wells (Cotton Valley 9,000+/-, Hosston 7,000+/-)
- Drill out plugs & hang off production strings
- CT Frac down annulus & cut slots, set sand plugs between zones
- Tracer logging
- Swabbing
- Perforate
- Well Site Testing
- Pulling cap strings
- CTU N2 Jetting
- Fishing Tubing & Casing
- CTU D/O
- Production Logging
- Acidizing Install
- Install Gas Lift with packers

Sandridge (West Texas)- Provided work over & completions for Sandridge in Fort Stockton, West Texas. Duties included:
- Vertical 8,000+/- Tesnus & Caballas
- Drill plugs with service rig & air foam unit
- Dual String completions w/snub unit & rig
- Single string completion strings
- Dressed liner tops
- Well Site Testing

Newfield (Oklahoma) - Provided 24 hr operations on new well completions ( horizontals) for Newfield in Mcalister, Oklahoma. Duties included:
- Wells TVD 11,000 +/-, TD 14,000 +/- to FC, 8 stages +/-
- TCP in horizontal
- Snubbed in production tubing with rig & snub unit
- Swabbbing
- Well Site Testing
- Drill out of Frac plugs in horizontal
- Mulit-Frac horizontal w/ plugs set between stages pulling fluid from Frac ponds
- CTU Drill Out to TD in Horizontal

2005 –2007 StimCom Wellsite Supervision & Consulting, Medicine Hat, AB.
Work Over & Completions Supervisor - Founded a limited company providing consulting services to various oil and gas companies. Consulting services included: analyzing and evaluating the effectiveness of policies and procedures and prepare reports and briefs for management on findings; identifying problem areas and making recommendations to procedures to improve efficiency and profitability; and conducting meetings to discuss recommendations and strategies.

Consulted for Western Gas, Canada Southern Petroleum, Sierra Vista and the majority of the time consulted for Pioneer Natural Resources Canada.

I have performed the following duties successfully for these companies: coil fracs, coil clean outs, perforating, monitored load fluids, static gradients and swabbing, hung tubing strings and tested wells. I have also installed well heads and bond logged. Supervised conventional fracs, logging, 2963 m coil rig, plug drill out, down hole video. I have extensive experience completing CBM Wells. I have also had the opportunity to perform Heliportable services, supervising Heliportable slickline, capillary string installations and N2 Unit testing. I have also installed down hole submersible pumps.

I've coordinated the 2007 Chinchaga winter project for Pioneer Natural Resources. Which detailed consulting on the company's Gas and Oil wells. Analyzing rig needs and consulting on pulling rods, the installation of a plunger lift system for their gas wells, as well as the installation of a new oil well down hole pumps.

2002-2005 Schlumberger, Medicine Hat, AB.
Frac Service Leader in Stimulation Department supervising pumping operations.

1993-2002 Halliburton Energy Services, Medicine Hat/Grande Prairie, AB
9 years experience as a Frac Operator/Service Leader. Experience as a Service Leader involved supervising pumping operations, including: Looking after equipment utilization, personnel organization and development, site calculations, and following various types of programs. Also attended the HEI in Oklahoma.

* Skills *
- Proficient in Microsoft, DIMMS, PERCS and WELLVIEW oilfield programs.
- Precise Wellbore Calculations
- Service organization and communication
- 16 yrs leadership ability
- Very good at following procedures set forth by engineers, reporting any discrepancies and providing solutions for corrective action.
- Very good at time management, safety management and cost control (AFE monitoring)

* Training Certificates *

* Safety and Regulatory Awareness for Wellsite Supervisors
* H2S Alive
* Well Service Blow Out Prevention
* PST (Petroleum Safety Training Program) IRP #16
* Detection and Control of Flammable Substances
* TDG
* WHMIS
* Standard First Aid

* Education *
1992/ 1993 Class 1 Driving School Ltd., Lethbridge, AB
Class 1 license & Air Brake Endorsement.

1990/ 1992 S.A.I.T., Calgary, AB
Medical Laboratory Technologist.

1998/1999 Attended Halliburton Energy Institute in Oklahoma for training.

1989/ 1990 Medicine Hat College, Medicine Hat, AB
Completed College General Courses.

1987/ 1989 Medicine Hat High School, Medicine Hat, AB
Received an Advanced Diploma majoring in Math and Science.

* Memberships & Awards *
1991/ 1992 Registered member of the Canadian Society of Laboratory Technologists
1991/ 1992 Lenord Kheun Memorial Scholarship

* References *

Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1484)

Go to Search Parameters...

Brief Description

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

Heavy Equipment Operator

Radio Operator Offshore

Welding Inspector/ Qa Qc Inspector

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Well testing Senior Operator.

Rig mechanic, rig technician

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

Oil/gas/water/wastewater electrical

Industrial Electrician/Instrumentation Technician with Linesman training

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Hydrocarbon Exploration and Development

Precision Drilling since Feb 2002, various knowledge in drilling different kinds of wells as well as downhole tools. I posses a excellent safety record. I have the ability to learn new jobs very quickly and throughly.

Regional Senior Account and Sales Manager with 9 years accomplished career track throughout the industry delivering and sustaining revenue and profit gains within highly competitive South East Asia Market. Exceptional communicator with a consultative sales style, strong negotiating skills, exception

Safety Engineer

E&I QA/QC Inspector, Certified QMS Lead Auditor, Having Oil&Gas onshore and offshore experience

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

Certified Rigger, Welder helper, and Forklift driver.

Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.

Critical Care Paramedic

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Instrument supervisor / technician v exp construction commissioning start up HSE

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Employment history with over 15+ years oil and gas exploration experience.

Field Machinist/Millwright

NDT Inspector-oilfield equipment

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Electrician - Construction

Experienced trainee driller, compitent derrickman, expiernced floorhand and roustabout with strong workover experience.

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out