Resume - Automotive Engineer Trade certificate. Post trade Diesel Fitter Trade Certifica...

Misco Jobs

Resume #81836

CONTACT INFORMATION:
View contact information...

Predominant Work Skills
* More recent experience in Roseberry Mine where coal, gold and other minerals are mined. I have been working on Caterpillar, jumbos, boggers, drills, Atlas Copco machinery as well and as other small engines, pumps, off road forklifts and various other sorts of equipment.
* Underground Diesel Fitter. Work exposure on Tamrock Axera 7, Axera D07 Superdrill, Solo 7/15 and Cat R2900G.
* As a qualified Diesel Fitter and Mechanic experienced from small engines, petrol and diesel vehicles including cars, light commercial vehicles, buses, four wheel drives, all trucks, trailers, full range of forklifts including small, off road ones and large ones that lift 45 ton (used on a wharf). Furthermore, other specialized wharf equipment including plan-marine (capable of lifting over 100 ton), and Terberg which is a very heavy multifunction prime mover capable of pulling trailers with extremely large amounts of weight upon them.
* Proven management and supervisory skills in a mechanical workshop and office setting.
* Experience in hydraulics, electrical controlled units and other electrical wiring applications.
* Proven ability to work in a remote area and unsupervised, organise work tasks, make excellent diagnostic decisions about mechanical problems, work to tight shipping and any other imposed deadlines, order and procure parts.
* I am also the employee representative for workplace health and safety.

Education:

* 1976 - School Certificate
* 1981 - Completed Automotive Engineering trade course.
* Completed certificate course on Nippondenso Air Conditioning Systems.
* 1982 - Completed Automotive Engineering Diesel post trade course.
* Certificate course in Overhaul and repair of Borg Warner 5 speed manual transmission.
* Certificate course in Mitsubishi Cordia Turbo new model familiarization Certificate course in Range Rover EFI.
* Certificate course in Jaguar 1989 M.Y. Introduction.
* Certificate course in Range Rover 1990 M. Y. Introduction. Certificate course in Rover 827 Vitesse and 1990 M. Y Introduction. Certificate course in Jaguar 1991 M. Y. Introduction.
* Certificate course in Jaguar XJ6 Mechanical.
* Certificate course in Basic Mig Welding of Steel.
* Certificate course in New Generation Star Tester.
* Certificate course in El Falcon Introduction.
* Certificate course in UN Explorer Powertrain Electronics. Certificate course in Professional Service Advisor. Certificate as Approved Inspection Station Accreditation. Certificate course in Land-Rover Associate Technician.
* Certificate course in The Service and Parts Marketing & Customer Contact Skins - Frontline Staff.
* Certificate in Holden warranty training – beginners.
Occupations:

2008/2009 - Barminco – Diesel Fitter.
I have recently been working at the Roseberry and Avebury mine, Tasmania as an Underground Diesel Fitter. Work exposure on Tamrock Axera 7, Axera D07 Superdrill, Solo 7/15 and Cat R2900G, pumps, small engines, off road forklifts and various other mechanical equipment. Underground and general safety induction for Avebury mine site undertaken and passed. Even though Avebury mine closed I was kept on by Barminco and was until moving to Queensland working at Roseberry.

2008 - Television Services Fitter - Self Employed.
Subcontract to Access TV Services fitting Austar. Working at heights with safety gear and generally fitting satellite TV services.
2004 to 2008 Sea Road formerly Patrick's Logistics – Diesel Fitter
Employed by Sea Road as a Diesel Fitter and have so been for nearly 4 years. I service and repair all light vehicles, heavy vehicles and their trailers, company vehicles, forklifts, cranes, plan-marine and wharf related equipment.
Most of the equipment and machinery is heavy duty diesel equipment that requires a good working knowledge and aptitude of not only the mechanical functions but also the electrics and hydraulics of the machinery. I have developed a well rounded mechanical skill set. I am able to apply those skills in a working environment to make capable diagnostic assessments in relation to the mechanical problems and repair that equipment safely in a timely manner and in accordance with company policies and procedures.
The wharf runs to very tight time schedules and therefore I have developed the ability to repair machinery accurately and quickly in order to get the machinery running properly.
I follow all work safety practices and procedures and I currently carry out the role of employee safety representative. I also work alone for a large percentage of my time and as such I have well developed time management and organizational skills to work largely unsupervised.
2001 to 2004 Burnie Motors - Team Manager.
I was employed with Burnie Motors as a Team Manager. I was responsible for the management of one of two teams ensuring budget targets were met (later one other Team Manager left and I took over managing both teams). I reported to the Service Manager and worked in conjunction with him to ensure the teams were running smoothly and achieving the set goals. I greeted customers and advised them on their service needs.
If there is an on-going problem with a car that has not been rectified then I was responsible for exhausting all avenues of research and as a last resort liaising with Holden itself. I also ordered the parts necessary for jobs and completed the costing of each job. Sometimes warranty jobs may come in and I am responsible for ensuring all relevant paper work required by both the company and manufacturer are completed correctly. I provide leadership skills for my team to help us work together as a team and ensure requirements were at least met and where possible exceeded and resolve any conflict that on occasions did arise quickly and amicably.

1999 to 2001 Tilford - Service Advisor
Whilst employed with Tilford I worked as one of their Workshop Service Advisor where I ensured that the work was completed in a correct and timely manner. I supervised the mechanics and liaised with other Service Advisors to ensure that all duties were completed to an excellent standard. After a time I was then rotated into the position as Service Advisor where I liaised directly with the clients and as and when necessary with Ford/Land-Rover/Jaguar/Daihatsu directly. I was responsible for ordering parts, costing, conflict resolution, fault diagnostics, organizing bookings, loan cars and general servicing requirements.

1995 to 1999 Jackson Motor Company - Service Advisor.
Duties Much the same as at Tilford except that when the Service Manager was away I took on the role as acting Service Manager. Also when we down on mechanics I would complete mechanical jobs as and when required.

1993 to 1995 Service Technician in own business
I was a partner in my own business. I provided mobile mechanical services to the North West Coast on a range of different vehicles, trucks, generators, pumps, tractors, buses as well as other vehicles. I sourced customers, parts, invoiced and chased any outstanding debts to the business. I also offered servicing advice to clients and offered a paint-less dent removal service to vehicles.
1992 to 1993 Service Technician - Von Bibras
I was employed as a casual Service Technician at their wholesale shed where I prepared and serviced vehicles that had been bought from the auctions on the mainland. Completed other mechanical duties as and when required.
1991 to 1992 Branch Manager-All States
I was employed as a Branch Manager for All States Transmission in NSW. I was responsible for the day to day running of the branch, canvassing clients, quoting, reporting and ensuring budgeted targets were met. I was also responsible for dealing with any conflict that arose between the business and the clients, which included giving evidence at the Motor Traders Association when disputes arose between clients and the Company.
1988 to 1991 - Jaguar Rover Australia - Senior Service Technician Durability.
From 1988 to 1991 I worked directly for the importers of Jaguar, Rover and Peugeot (JRA). Austral, Denning and PMC coaches were also owned by JRA. I was the Senior Technician in our durability section which involved working unsupervised for large amounts of time preparing prototypes for durability testing in remote parts of Australia. I was also involved in setting up test rigs and component manufacturing. I was then responsible for recording the results and notifying my supervisor or Jaguar Rover UK as required.
Whilst employed in the position I used sophisticated diagnostic equipment that required the ability to interpret the results and feed them on as required, as this information would be used for rectifying faults for the final product. I have also been involved in testing faults with the Austral, Denning, PMC side of the coaches. Unfortunately, the company went out of business and all employees were made redundant. However, as a result of my excellent service to the company I was offered a short - term position with Land-Rover Australia until the army contract was fulfilled. During my time at Land Rover I was involved in testing Land Rovers and manufacturing components as and when needed.

1985 to 1988 lnghams Chickens NSW - Workshop Manager

I was employed as a Service Technician/Manager for their workshop. Whilst employed in this position I was responsible for the running of the mechanical workshop and I had one other Service Technician under my direction. I was on call out and completed mechanical services as required.

I worked on their Chicken lines, pumps, generators, small motors, tractors, trucks, forklifts, fleet cars, vans and other machinery as and when required. I was responsible for ensuring things were fixed and serviced in a timely manner. I ordered lease paste your resume here. Don't include 'Contact Information' because it will be added automatically from corresponding field above. If you used symbols/special characters such as bulletted lists make sure they are properly displayed. We suggest you to replace bulleted list symbols with minus symbol (-).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1490)

Go to Search Parameters...

Brief Description

With knowledge in SMAW 6G,TIG,GTAW,OAW. and Brazing welding. Plasma and Oxy Acetylene cutting, Lathe Machine operation, Pipe fitting Jobs and fabrication. Operate the forklift ,crane and wenches

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

Automotive Engineer Trade certificate. Post trade Diesel Fitter Trade Certificate. Over 30 years of wide ranging experience including heavy euipment and mining equipment. Excellent diagnostice skills.

Planning, market analysis, oil pricing mechanism/simulation and modelling, forecasting, market research, oil industry management, downstream oil industry facilities monitoring, fuel quality monitoring and evaluation, project management, project proposal preparation, oil and gas project evaluation,

Paint Inspector/Supervisor

To obtain a Technician, Operator, or Specialist Position.

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

Are you looking for professional engineer, manager and a leader in one? Your search is over. Registered as professional engineer in Canada, more than 20 years of international experience in project, engineering, sales, services, business development, commissioning and maintenance of refinery.

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

pipe fitter,6G certified gtaw& smaw welder ,field experience, saudi arabia Aramco project, Malaysia liquified natural gas under hyundai constraction, kellogs proponent , petron bataan refinery Philippines

Being an MBA marketing and Electrical Engineer I have an experience profile which comprise of, total experience of 13 years. Out of this I have 5 years international experience in Nigeria in turnaround and business development. I have been involved in trading, business development activities, market

I am an international business transaction professional, with five years experience specializing in the rail transportation and oil industries. I am currently an MBA student specializing in international business.

I have Worked has Process Control Room & Field Operator in Indian Organic Chemicals Limited, Chennai, India for 14 years and has Control Room and Field Operator Oman Chemical Industries Limited (S.A.O.G), Oman for 2 years

Application For The Post Of Offshore Medic

Adaptable, Enthusiastic, seeks work in Aberdeen or UK.

Nineteen years experience in mechanical and electrical work offshore Gulf of Mexico

Journeyman Machinist 30 yrs.experience mechanical maintenance in oil and gas industries, mining, pulp and paper

15 years of hands on experience in erection, commissioning, troubleshooting, overhauling, preventive maintenance, shutdown maintenance of rotary and static equipments in the Mechanical field, Alignment, Assembling of Mechanical seals etc.

Certified Facility Manager

expirience in hydraulic fluid connectors

Automotive Service Technician (Mechanic

Circa 30 years work experience (13 years Middle-East / Africa)

using AUTOCAD

Time served Mechanical fitter with 20+years experience on a variety of petro-chem processes.DCS control room operator. PPO2 in processv technology. Nvq3 in mechanical fitting.

Production Engineer / Planner, 2 year National Certificate with 12 years experience

To secure a position as an Instrument & Electrical Technician.

Business Analyst ∙ Technical Communicator ∙ Facilitator ∙ Trainer +12 years in the IT and energy sectors.

Drilling Rig equipments maintenance and repair mechanic with 15+ years experience in oil industry. Excellent maintenance ,repair and rebuilding experience of Cummins caterpillar diesel engines , Allison transmissions relate to oil industries.

Store keeper (SAP, Computer skill, safety training and certification)

Analyze, resolve, and log all issues by email, phone, and face-face sessions with the agent. Reviewed recorded calls between the agent and clients to insure quality support. Encourage and motivate the agents to take advantage of training available through Shell. Identify & resolved issues.

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Electrical/Controls/Instrumentation Engineer, Commissioning and Design.

Safety officer at Aramco Saudi Arabia for more than six years

Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai .

Experience Derrickhand

I am a fully qualified derrickman and have been working offshore for the past 9 years.

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

Have been welding for over 10 years the lat 4 have been in the oil field and now i want to get into the pipe welding but will the oil field for as long as i can

Experienced electrical and mechanical pipeline tech.

Worked oil rigs overseas, including Yemen,Venezuela, Ecuador, Cuba and Russia. Did oil rig servicing in Alberta. I am presently working and would like to take an overseas position.

First Line Supervisor (driller), Compliance Officer (certified construction officer), 5 years Post Secondary Education including Business & Finance Diploma

Experience welder and heavy equipment mechanic

Well Service Supervisor or Coil Tubing Supervisor

A proven Welder highly skilled in the areas of aluminum, ferrous and non-ferrous (CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

I have been a Mechanic now for 5 years and worked offshore as a rig mechanic for 2 years.

fit pipe fallowing by blue prints and weld pipe whith tig,mig,stick and flux core

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

I have worked in the Barnett Shale for 5 years and am experienced in running title, creating runsheets, dealing with lessors and all aspects of curative tiel work.

Skilled rig hand. 15years experience. Worked drilling and production rigs.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out