Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #82749 next resume »»
CONTACT INFORMATION:
View contact information...

Position of Equipment Operator or Foreman

PERSONAL:
Capable of supervising, managing and motivating workers
Ability to handle multiple projects
Experience in unique civil projects
Highly motivated and self starter.
Willing to learn new ideas

EXPERIENCE:
Triple Transfer Driver 2007-current
AB Construction, Doyle, Ca
Delivering aggregate material to clients in Western Nevada. Took position due to lack of work in the Reno area for construction.

Mass Excavation Foreman, 2005-2007
Atlas Contractors, Inc. Sparks, Nv
Constructed subdivisions and commercial sites. Onsite supervisor. Usually supervised 3-20 employees depending on project needs. Estimated production schedules for mass excavation for dozer/scraper operations. I did rough and finish grading for house and building pads, streets, sidewalk, curbs and slopes. Set grades for slopes, swales, streets, channels, curb and gutters, and sidewalks. Operated finish blade majority of the time as a working foreman. Operated all other machines when needed. Instructed toolbox safety meetings daily, and major issue safety meetings on Thursdays. Worked closely with Grading Superintendent, Underground Utility Superintendent and Foremans, Paving Superintendents and Foremans, Project Owners, and government inspectors, to insure all aspects of the project were on track and on time.
Operator/Laborer Foreman 2004-2005
The Ryan Company, Tauton, Mass.
Worked on a new waste water treatment plant as a backhoe operator. Promoted to Operator/Laborer foreman by Structures Superintendent. Led excavations on all buildings and piping within the new Sewer Treatment Plant. Very enviromentally sensitive area of San Luis Obispo, Ca. I spent 8 months there, but talks of possible company closure by parent company Quanta, made me decide to return to Reno.

Grading Foreman-2002-2004
Peavine Construction
Worked only in the private sector on one very large master planned community and one storage facility. Supervised 5-15 operators. Used Trimble GPS to set up most of the subdivisions, used GPS and lasers to finish lots, handheld and machine controlled. Most decisions were made by Grading Superintendent, I just followed instructions.

Mass Excavation Foreman, 2000-2002
CBK, Inc. Las Vegas, Nv
Was a full charge foreman. I managed up to eight projects at one time. Setting up project, lay-out, organizing crew, ordering machines, and all paper work.We did private work such as subdivisions and commercial projects, and high rise ground work excavations. In the public sector were various new schools and additions to two college campuses. Little to no supervision from Superintendent, or company owner. Spent time in the field, as well as in the office. Internal problems caused to company to close its' doors.

From 1997-2002 I worked for various union shop companies mostly in the Las Vegas area. Some as a foreman others as an operator. I spent four months in 1997 on a flood project in Walker Canyon, Walker California. Excavating 10 feet below river bottom, and building new river path, that was destroyed by the flood, installing various size rip rap. I have experience working on airport projects grading, installing new lighting (piping only), with swales, and numerous grade breaks, using laser and GPS, to lay base with a paver for a tarmac, and finish grading it with the TopCon 3D Macine Control laser system to grade within -.02 of finish product..

EQUIPMENT EXPERIENCE
DOZERS- All Cat D3-D-11R, Komatsu,. John Deere, Dresser, Fiat Allis
LOADERS- All types and sizes to Cat 990, John Deere, Kawasaki, Komatsu; grading, backfiliing, loadiing trucks.
BLADES- Cat 12-16H, John Deere 772, Volvo, Dresser
EXCAVATORS- Cat 301.5 to 385L, John Deere to 850, Komatsu to 95z to 450, Hitachi 220 to 1800 with 9 yd bucket loading 777 haul trucks
OTHERS- Rubber-tired backhoes, compactors large and small, rollers static and vibratory, scapers; paddle-wheels, conventional and twin engine.
I have 25 years of experience in civil construction. I have worked on major highways, steep terrain, tight access, commercial, heavy industrial and residential projects, both public and private sector. Like to be faced with challenges. I know how to move dirt, and take moving it seriously. I can read and interpret plans, and can set grade. I have no tolerance for sloppy work. I am both old and new school able.

EDUCATION:
Lee Vining High School
Lee Vining Ca.
Graduated in 1983 and began my construction career
I do have experience with Trimble and TopCon GPS handheld and on machines, and TopCon 3DMC system.

ABOUT ME
I was born and raised in Lee Vining Cal. Left in 1983 to pursue a career in construction.
I am married with five children and two step children. Grandpa of two. Three of the five are out on their own.. I am no longer affiliated with any union. I am currently driving a triple transfer dump truck for a friend since construction is slow here in Reno. I believe that being punctual, getting to work is priority, and safety is mandatory at all times. I have a great work ethic. I like to be prompt, and expect others I work with to be. I do not use any form of illegal drugs, nor do I ever come to work hungover or drunk, and when in a supervisory position, I send those home that do. I adhere to company policy and safety regulations. I take these very seriously. I am willing to travel as the projects change.

ADDITIONAL INFORMATION

I have nearly 25 years of experience in grading and underground utility construction. I have operated all sizes of excavators from mini's to an Hitachi 1800. Loaders of all sizes. Dozers D3 to D11R. Cat, John Deere, and Volvo blades. Most brands of rubber-tired backhoes. Scrapers; paddlewheel, conventional and twins. Multi-terrain and skid steer tractors. I have worked on house pads to super arterials, city streets, commercial sites, industrial power plants, water and waste water treatment plants, bridges and specialty jobs. I can read and interpret plans, and set grade. I have installed water lines, class 150 and C900, and ductile to 48 inch. Sewer to 60 inch, and storm drain from 8 inch plastic to 144 inch multi plate culvert, and 10' x10' triple box, pour in place and pre-cast concrete. I have finished slopes with dozers, blades and excavators. I have ran excavator/haul truck operations, and worked with drilling/blasting operations. I also have experience in sand and gravel/crushing operations.
I have 10 years experience of being a supervisor, and expect attention to detail. I have worked numerous types of project applications and used many different styles to complete a task. I am willing to travel if project calls for it. I consider myself an expert in this field.
This is only a basic overview of my experience in this field. I have tried not to limit myself in all aspects of heavy construction. If you need more information or have any questions please call.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 451 to 500 of 1468)Go to Search Parameters...
Brief Description
Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.
I am a highly motivated & adaptable materials/ logistics specialist with a thorough knowledge of all disciplines within material acquisitioning, inventory management and material logistics. My experiences have included responsibilities of high value projects mainly with in the drilling industry.
I have knowledge in Maintenance and Operation procedures. My experience is in PM's, Reliability, Planning & Scheduling. I would like to continue to grow in the Petroleum Industry and at present I am continuing my education in Operation Controls. I am also very interested in offshore or shift work.
IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company
Over 20 years of Electronic, Electrical and Mechanical experience. 10 years of Field Service in both domestic and international travel.
Trade Qualified Boilermaker with over 15 years experience
Oil and gas industry for over 12 years.
Well Intervention, Well Services, Field Well Completion,
Sir, as I am working since couple of decades in oilfield both onshore and offshore I have come across all sorts of jobs related with mobile land and offshore rigs, jackup self elevated platforms, barges heavy lift ships upto 2ooo ton crane capacity, engines cat, GM, cummins, mudpumps,bop,X" valves
Seeking position of: FIELD OPERATOR I have taken many courses in pursuit of my goal to work in the oil and gas industry. I began by taking the Oil and Gas Operator¡¦s Program in Nisku, which provided hands-on training for battery operation. I then took the required oilfield safety courses.
Hard Working, Computer Literate, Very Dependable
I have five years offshore experience. I am a hard worker and faster learner.
PIPE FITTER
Experienced Electrician with supervising experience is seeking a position offshore. I have all the relevant qualifications. And feel that I would be a asset to any company.
Second year apprentice steamfitter/pipefitter
I am a graduate with Chemistry in 1st class having 24 years experience as a Chemist/ Senior Lab Technician in Petroleum Refinery (Takreer, ADNOC) (10 Years), Natural Gas Plants(5 years) (in Malaysia and DUGAS), Petrochemical Plants (5 Years) (MTBE & Pentaerythritol) and 3 years in Pesticid
I am looking to work on the drilling rigs have some expiriences from previously working for precision drilling
Hard working, highly motivated team player with over five years experience in the oilfield industry.
As a jack of all trades with a strong work ethic and a desire for a career with advancement opportunities, I know I can be a valuable asset to your company. I am a team player and a very fast learner.
Electrical Project/Construction Management
As I am having good experience in Electrical field, working as a Electrical Technician for a contractor employee in Kuwait National Petroleum Company, Mina Al Ahamadi Refinery
qulification;having my 2years of industrial training instuite(iti),work exp; 8 years in refinary& 2 years in power plant having a capacity of (300*8 )MW
Have worked in oil industry for 4 years doing fracking, cdl driver,acidizing .
Holder of Diploma in Computer Systems Analysis and Design
I have three years diploma certificates in instrumentation and i have more then 20+ years experience in instrumentation at present i am working with american company at west africa on offshore platform in instrumentation departments.
10 years of welding and oilfield expeience combined.In addition with pipeline operator certification, offshore oil and gas production certification.
Facilities supervisor for utilities, electrical disturbution, ammonia refrigeration, power boilers and heat exchangers,production equipment, infrastructure, mechanical contractor for twenty years,
Recent graduate of McGill University, Montreal Quebec Canada. Relevant field and research experience in the Canadian Rocky Mountains with structure sections, digital mapping, and air photo interpretation. Field experience with DeBeers Canada helicopter sampling.
Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.
Driller Five years, Derrickman Two years, Motorman Three years, Now nurse ICU, able to use micromiter and read blueprints hard worker and easy to work with travel anywhere
Experienced in rigging and crane operating and seeking employment in the offshore oil and gas industry.
Mechanical technician with petro- chemical experience, mining experience, i have a certifiate four in mechanical engineering. my skills are adabtable to numerous aplications.
Training in many different areas, but as of April 2009 i will be a certified block 1 steam fitter/ pipe fitter
25 years as a cook or manger in the food service operations
I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.
Project Management and Drafting Skills PFDs, P & IDs, General Arrangements,Isometric Drawings
Planner, scheduler, Teamwork, time manangement, lead, excellent communnication
I am working in a oil field company in abudhabi as a store keeper since 1999. I am seeking a suitable vacancy for my experiance.
I am available for immediate employment as an Assistant Driller or at a position below this.
I am young graduate engineer ready to work at any place in the world and with great interpersonal skill with the team
Certified Welding Inspector, have been qualified as lvl II UT, MT & PT
5 Year in Oil & Gas Drilling & Exploration Field in Off-Shore and On-Shore.
Senior Instrumentation Supervisor / Engineering Planner with SAP R3 experience
I see myself as a highly talented Health Safety & Environmental Management professional with extensive experience ensuring compliance with the Health, Safety & Environment rules, regulations and policies & standards in the OIL & GAS SERVICE INDUSTRY in China/ Singapore with leading companies. Have i
computer operating
I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.
4 yrs Logistics work, Utility and Coating Inspection, Telecommunication installation and removal, very PC friendly,
Deepwater Completions Consultant
I'm seeking a position that offers challenges and opportunities that complimens my 23 years experience as a remote site paramedic.
Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;
1   2   3   4   5   6   7   8   9   [ 10 ]   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com