Resume - Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afgh...

Misco Jobs

Resume #83383

CONTACT INFORMATION:
View contact information...

KEY QUALIFICATIONS:

a qualified electrician and Diesel Engineer, with many completed courses and a Diploma has many years experience in power supply units, Diesel Engines, wiring of
Domestic housing and industrial buildings, repairs and services (to only mention a few).

He was a Power Generation Specialist at AEAI, ADVANCED ENGINERING ASSOSIATES INTERNATIONAL (Afghanistan) where he specialised in: repairs of generators, planning and scheduling of maintenance sets, daily prof. services and repairs, assisted in the costing of budgets ordering of spares, and maintenance and rebuilding of engines, Cummins, mainly.
Contract ended April 2009. (End of TO 5)

Job Description is as follows:
Assist the Power Plant Manager by providing input to identify key success factors
For the Power Generation crew, as well as the training of the Local Nationals,.
Provide leadership to cause the creation of organizational structure and processes required.
To fully execute the requirements of services and is responsible for the execution of Power Generation services, quality performance and maintenance costs.
Evaluate Power Generation service execution for compliance to contract, design data, schedule, and cost budgets.
Maintain the short range look ahead plans.

has experience as:
Service Advisor,
Electrician: repairs, fault finding of existing wiring on
Residential homes and buildings, installations, wiring of DBs etc.
Artisan- Electrician and Machine fitter: Repair and services to Hydro vane ï¿½ï¿½"screw and Piston Type Air Compressors
Branch Manager: Workshop Foreman, Foreman of a workshop for the
Manufacturing of Stainless-Steel products, installing of S/Steel Balustrades and daily planning of projects in Mpumalanga and Maputo Euro Steel are the Stockists and Distributors of S/Steel Materials and fittings. Receiving and Dispatch of ordered Material. Weekly and monthly stock takes and recons.

started his career at SANDF as apprentice at the School of Signals in Heidelberg where he attended many courses ï¿½ï¿½" passed theory on Diesel simulators and practical on diesel and petrol driven generator sets. During the training period of 10 years, Andre was appointed as workshop foreman of the repair and maintenance department. Andre was transferred to Namibia where power plants had to be managed.

was in charge of all Power Units (gen sets) throughout Mpumalanga at all military bases.

EDUCATIONAL QUALIFICATIONS:

DIPLOMAS / CERTIFICATES: T1 Electrical
Mathematics
Electrical / Mechanical
Engineering Science
Applied Technology

OTHER COURSES: Pretoria College for Advanced Technical Education
(Electrical, Diesel Engines; Batteries Lead acid; Power Reticulation; Electrical Panel Wiring; Panel Faultfinding; Motors and Switchgear)

Generator Power sets Mobile and stationary
(Industrial Physiology; Production control; Workshop organization and control; Auto Electrical)

NAT. SAFETY COURSES( NOSA): Preliminary Safety Training
Advanced Safety cert. No NT/A06/82/0040

AWARDS RECEIVED: Southern Africa Medal awarded for Outstanding
Service # 24933
Cross border Operations. # 001914
Operation Moduler # TP215 # 180
Operation Hooper
Operation Packer #251
Operation Displace.
C of the Army recommendation Medal for outstanding services rendered #4838

ADDITIONAL COURSES: Logistics and Warehousing 95,5%

EMPLOYMENT HISTORY

May 2008 ï¿½ï¿½" April 2009, AEAI ADVANCED ENGINERING ASSOSIATES INTL.
Power Generation Specialist, Maintenance and Repair of Generator sets, Kandahar Power Station, AFGHANISTAN Planning and scheduling of services, and engine overhauls, on Cummins sets. Managed the project of a new 10 MW Power Station being built on site (Cummins QSK 60), wrt all planning, and operational requirements, up to commissioning in JAN 09.

March 2007 - April 2008, KELLOG BROWN ROOT, Power Generation Technician, IRAQ. Maintenance and Repair of Generator Sets, stationary Daily planning and scheduling of services And repairs, ordering of spares Repair and Maintenance of PERKINS CUMMINS, CATERPILLAR AND FG WILSON Engines and Alternators, Trouble-shooting generating ï¿½ï¿½" sets, 85 KVA ï¿½ï¿½" 2015 KVA sets.

2005 ï¿½ï¿½" 2006, STEEL IMAGE / EURO STEEL, Branch Manager/Foreman, South Africa. Foreman of a workshop for the manufacturing of Stainless-Steel products. Installing of S/Steel Balustrades and daily planning of projects in Mpumalanga and Maputo. Receiving and Dispatch of ordered Material. Weekly and monthly stocktakes and recons.

2000 -2004. SWIFT ELECTRICAL, Foreman of Works, Electrical Division South Africa
Foreman of a Workshop for the Wiring of Residential and Commercial Buildings. Wiring, circuit testing, installations, Distribution boards and reticulation of the above.Maintenance and repair contracts on Stand by generators as per contracts.

1978 ï¿½ï¿½" 2000, SANDF, South Africa

1996 ï¿½ï¿½" 2000 - Workshop foreman in charge of all Power Units (gen sets) for all military bases in Mpumalanga. Transferred to the signal unit In Nelspruit. (1996 - 2000 ) and appointed as Workshop foreman in charge of all Power Units (gen sets) throughout Mpumalanga at all military Bases All repairs and services to this equipment throughout the region was done by Van Zyl and his team of specialists.

1990 ï¿½ï¿½" 1995 - Workshop-Foreman in charge of all Telecommunications, and Power plants, Namibia Military bases. During January 1990 Mr. Van Zyl was transferred to 6 Signal unit in Namibia, where he was appointed as Workshop-Foreman, in charge of all Telecommunications, and Power plants deployed throughout Namibia at Military and operational bases. All these power plants had to be maintained (electrical and mechanical supervision). No subcontractors were appointed to do this task. Mr. Van Zyl was the workshop Foreman for 5 years.

1978 ï¿½ï¿½" 1990 - Trainer and Technical Advisor (Generation sets, etc). Started as apprentice (1975 ï¿½ï¿½" 1978) and qualified as Electrician (Signals) in 1978. During 1978 - 1988 trained apprentices in the following subjects: Generator Sets, Diesel Engines and Power supply units. Trained Apprentices at the SANDF School of Signals (Heidelberg) for 10 years in the following disciplines: Workshop Foreman; Financial Manager; National Health and Safety Representative; Qualified as Millwright 22 years on Power Supply; Units, Mobile and Stationery. Gen- Sets 1.5kva/1500; Diesel Engines Qualified, Diesel Fitter; Wiring and Power reticulation, single and demob. ; Panel Wiring, Electric- Motors and Switch-gear; Auto- Electrical, Battery Charging and rebuilding; Installation of Solar Panels, Veld-Lighting, Distribution and reticulation of operational bases; Operational Employment outside the Countries Borders; Gen ï¿½ï¿½"sets, Maintenance and repairs.

Was extensively involved in operational and urban capacity as Technical Advisor. Work he did as Signals Electrician entailed that all Power plants as a whole was his responsibility, serviceability wise, meaning that the electrical as well as the diesel/petrol engines had to be maintained by one specialist. During this period of training he was also appointed as the Work-Shop Foreman of the repair and maintenance department.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1474)

Go to Search Parameters...

Brief Description

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR

HVAC FOREMAN

Rigging & Lifting Specialist

Document Controller with 10 years experience in Oil & Gas industry

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

Driller with 9 years experienc on land rigs and 24 yrs. total exp. in drilling field

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

Drilling Supervisor with directional, horizontal experience .

Have more than 13 years of experience in log interpretation

Document Controller - Certification Supervisor cum Math/Physics/Computer Instructor

ITI(NCTVT)ELECTRICIAN) with liecence

Level III vibration Analyst with electronic and mechanical background

Instrument Pipe fitter / supervisor

More than 15 years working experience in Electrical/Electronics & Telecommunication.

Instrument Technician Radio technician Scada-moscad

My strengths lie im my ability to manage available resources and communicate with others

Driller / Tool Pusher (Onshore / Offshore)

Experienced PROJECT MANAGER with 10 years experience training and leading development teams to

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.

15+ years of IT experience and 6 years of SAP BWv7 and SAP R/3 ABAP experience. I would like to introduce myself as a Consultant, having an Attitude & Aptitude for Analysis, with range of skills in Technical arena. I do have solid Experience in Conceptualizing, Developing.

Master Electrician

Qualified Welder / Fitter / Mechanic

Piping superintendant with 35 years experience in the oil and gas industry

Diagnose and repair engines, transmission and final drive systems including manual and automatic transmissions

Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w

Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).

Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

I have worked in the Oil & Gas industry for over 20 years

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Senior Welding Inspector QA/QC

20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.

been welding for 25 plus years...

Industrial Electrician

Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.

I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.

I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing

Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience

39 years experience running both surface & mineral titles & preparing reports

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.

I am seeking a long term employment contract within a company as Rigger.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.

23 years of sales experience including positions as a sales representative, sales trainer and sales manager. I work very well with the public. I know how to close the client and get the answer I am looking for.

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out