Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #83893 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL SUMMARY
Geologist who successfully leads, develops and manages geologic investigations, delivering quality results through understanding the objectives and goals of the task. Reputation for finding creative solutions to challenging problems. Develops positive and productive working relationships with clients and co-workers. Passionate about the dynamic relationships of geologic systems.

AREAS OF EXPERTISE
* Environmental and Geotechnical Field Investigation o Soil and Rock borings o Soil and Rock classification o Formation testing
* Geologic Mapping o Field reconnaissance o Geologic unit identification and delineation
* Construction Observation and Inspection
* Data Analysis o Environmental and Geotechnical data qualification and interpretation
* Report Writing o Geologic Hazard Reports o Geotechnical Data Report o Phase I and II Environmental Reports
* Proficient with gINT and working knowledge of CAD

PROFESSIONAL EXPERIENCE
GEI CONSULTANTS, INC. 2000 - 2008
GEI Consultants, Inc. provides a broad array of geotechnical, water resources, environmental and ecological science and engineering consulting services to clients nationwide
Staff/Project Geologist (Geotechnical Division) Denver, CO 2002-2008
* Performed geologic mapping for dam foundations and construction oversight and coordination for foundation grouting and embankment fill placement.
* Performed subsurface field investigations including soil borings, test pits, sample collection and analysis and data collection. Construction oversight for Soil-Concrete-Bentonite Cut off Wall construction.
* Field coordination and investigation for microtunnel design beneath South Platte River.
* Field investigation and report to determine scour and void potential beneath concrete structures at dam sites
* Performed drilling investigation to determine relative "soft" material below dam foundation, as part of continuing investigation for stability.
* Performed construction oversight for the construction of slurry walls. Observed excavation, identified depth of bedrock key material and performed quality control testing for slurry and backfill mixtures.
* Assisted with a Geologic Hazard Report for the proposed pipeline alignments. Necessary tasks included soil and rock borings, data collection and review, aerial photo analysis, field reconnaissance, geologic mapping, and geologic hazard identification and delineation.

Staff Geologist (Environmental Division) Woburn, MA 2000 – 2002
* Conducted subsurface investigations, using Geoprobe, Air-Rotary, and Rock Coring methods to identify and define the extent of subsurface contamination. Produced boring and well construction logs for soil/rock borings and installed monitoring wells. Collected soil and groundwater samples for chemical analysis. Collected groundwater samples using low-flow sampling methods.
* Assisted in operation, maintenance and monitoring activities at a former manufactured-gas facility. Performed monthly groundwater elevation survey, collected groundwater characteristic data and monitored for non aqueous-phase-liquid (NAPL) in the site's passive treatment system. Assisted in maintenance of NAPL collection system in the intertidal zone of the ocean cove. Low flow sampling techniques were used to collect groundwater samples for chemical analysis.
* Responsible for the monitoring No. 6 Fuel Oil in fractured bedrock. Performed monthly product gauging and removal from recovery wells on site as part of IRA monitoring activities.
* Conducted site visits and visited municipal, federal and state offices to collect comprehensive information for preparation and writing of Phase I, Site Assessment Reports.
* Obtained samples to identify and determine the extent of contamination. Assisted in the preparation for a Risk-Based Disposal Plan for demolition and off-site disposal of buildings and their contents suspected of containing high concentrations of polychlorinated biphenyls (PCBs) a in the preparation of a Quality Assurance/Quality Control Plan and the specifications for demolition and disposal of building material.

EDUCATION
B.A. in Geology (Minor: Environmental Studies), Wittenberg University, Springfield, Ohio, 2000

CERTIFICATIONS
40-Hour HAZWOPER General On-Site Staff Certification
Hazardous Waste Site Operations – Supervisor
Confined Space Entry
2-Hour OSHA Asbestos Training
Respiratory Protection Training
AFFILIATIONS
Association of Engineering Geologists
Association of State Dam Safety Officials

PROJECT HIGHLIGHTS

GEOTECHNICAL

Rueter-Hess Dam and Reservoir Project, Parker, Colorado. Performed geologic mapping for dam foundation and construction oversight and coordination for foundation grouting and embankment fill placement.
Feather River Levee, Marysville, California. Performed subsurface field investigations including soil borings, test pits, sample collection and analysis and data collection. Construction oversight for Soil-Concrete-Bentonite Cut off Wall construction.
East Sprat Interconnect, Thornton, Colorado. Field coordination and investigation for microtunnel design beneath South Platte River.
NPPD, South Platte, Nebraska. Field investigation and report for Nebraska Public Power to determine scour and void potential beneath concrete structures at Kearney Spillway, Southerland Dam and Maloney Dam.
Large Dam, Silverthorne, Colorado. Performed drilling investigation to determine relative "soft" material below foundation, as part of continuing investigation for stability.
Hazeltine, Road Runner Rest II and Brinkman-Woodward Gravel Reservoirs, Adams County, Colorado, for Denver Water. Performed construction oversight for the construction of an approximate 3 mile slurry wall. Observed excavation, identified depth of bedrock key material and performed quality control testing for slurry and backfill mixtures.
Southern Delivery System, El Paso and Pueblo Counties, Colorado. Assisted with a Geologic Hazard Report for the proposed pipeline alignments. Necessary tasks included soil and rock borings, data collection and review, aerial photo analysis, field reconnaissance, geologic mapping, and geologic hazard identification and delineation.

ENVIRONMENTAL

Subsurface Environmental Investigations at multiple sites, Massachusetts. Conducted subsurface investigations, using Geoprobe, Air-Rotary, and Rock Coring methods to identify and define the extent of subsurface contamination. Produced boring and well construction logs for soil/rock borings and installed monitoring wells. Collected soil and groundwater samples for chemical analysis. Collected groundwater samples using low-flow sampling methods.
IRA Monitoring Activities, Keyspan/PG&E, Salem, Massachusetts. Assisted in operation, maintenance and monitoring activities at a former manufactured-gas facility. Performed monthly groundwater elevation survey, collected groundwater characteristic data and monitored for non aqueous-phase-liquid (NAPL) in the site's passive treatment system. Assisted in maintenance of NAPL collection system in the intertidal zone of the ocean cove. Low flow sampling techniques were used to collect groundwater samples for chemical analysis.
IRA Monitoring Activities, Winchester Hospital, Winchester, Massachusetts. Responsible for the monitoring No. 6 Fuel Oil in fractured bedrock. Performed monthly product gauging and removal from recovery wells on site as part of IRA monitoring activities
Phase I Environmental Site Assessments at multiple sites, Massachusetts. Conducted site visits and visited municipal, federal and state offices to collect comprehensive information for preparation and writing of Phase I, Site Assessment Reports.
Surface Soil and Groundwater Sampling and Risk-Based Disposal Plan, Metropolitan District Commission, Canton, Massachusetts. Obtained samples to identify and determine the extent of contamination. Assisted in the preparation for a Risk-Based Disposal Plan for demolition and off-site disposal of buildings and their contents suspected of containing high concentrations of polychlorinated biphenyls (PCBs) a in the preparation of a Quality Assurance/Quality Control Plan and the specifications for demolition and disposal of building material.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 951 to 1000 of 1474)Go to Search Parameters...
Brief Description
Bachelor of Engineering_3 years experience in petrochemical construction field
Project Manager (Electrical, Alarm Applications, Construction,Safety)
Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petrochemical plant operation as a field/panel operator.
Mechanical CAD Design Product and Tooling Development Engineeer
Long term experienced : wanted , Painting Inspector , Paint Superintendent or Technical Sales
•Fabrication, Erection & Inspection of piping using CS, SS, GRER. •Preparation of Piping Test Packages, Mechanical Clearance Inspection & Pressure Test Inspection with Client. •Controlling of test packs from Site & QC department.
Experienced electrical sales, buyer, customer service,contract negotiations,job bidder
I am Aldrin Entac, male, single and 26 years old. My Present work Exposed me in Construction Site, working on ELV system Company as a Site supervisor for BMS (Building Management System) Structured cabling System,Security System, Audio Video System, Broadcasting System, GSM System, TETRA System etc
DCS Engineer working on power and oil & gas facilities
Just finished college. I currently don't have any experience but am a willing and fast learner.
Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.
Have some supervisiory and Electronic training
I have completed Masters in Commerce( MCOM) and i have more than 7 years expereis in Accounts/Audit.I have strong knowledge in Tally and SAP- Sales & Distribution model
CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)
Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR
HSE Engineer with Quality experience, consultant, Mechanical Engineer
Procurement Purchasing Logistics Inventory Control Contracts Negotiations
Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.
Degrees in Geology and Environmental Studies (Minor). Experience includes: Environmental and Geotechnical Field Investigation (Soil and Rock borings, Soil and Rock classification, testing); Geologic Mapping; Construction Observation/Inspection; Data Analysis; Report Writing(geo haz, data, phase1,2)
Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation
Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments
HSE Remote Safety Medic, Offshore Medic, Emergency Medical Technician, Safety Officer
Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting
Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased
B.E – Ceramics & MBA, having with 12 years of experience in an integrated Steel Plant Projects & Maintenance of Refractory -Applications/Installations/Selections/Inspections in India and Abroad
Experienced heavy duty mechanic. Worked in workshop and field service. Managed workshop and fleet of field service vehicles. Engineering experience include testing and reporting on ADT’s. Currently employed by Bell Equipment Co. (Hitachi AH500 – AH300). Got experience on lots of different machines
Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry
PhD in Chemical engineering with lots of laboratory experience including, but not limited to design of experiment. Cummulative GPA 3.52. Specialized in electrochemical synthesis.
Cwi/QA/QC Manager
I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse
MWD / LWD Field Service Engineer . Versed in all Positive Mud Pulse, Electro-Magnetic (EM), Wired Pipe Technology (IntelliServ), MCLS, MWD probe and collar based tools. Knowledge of Directional Drilling principles, and downhole vibration management.
Electrical
Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.
I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.
Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.
Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.
I at DK India shoulder the responsibility of showing readers the actual position of their destinations on accurately and intricately crafted maps. The scale varies from large country maps to small walk maps, which guide those traveling by foot from one tourist attraction to another
Water Survival, Safe Gulf, Trained in CPR and First Aid, Rigging Certifications
Experience in heavy industries as Oil and Gas, Power Plant installation, Piping and pipeline, Rotating and Static equipments. Experience in, welding and fabrications, equipments installation, commissioning, machine repair and maintenance. Experience in complex machine and equipment assemblies.
Precision Millwright w/ Machinst and Electrical Background
Welding and electrical and management and mining class 32 hour certified fork lift operator
Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration
In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.
Hardworking, easy learner,..... Bachelor of engineering in instrumentation
Piping and Welding Supervisor QA
Prventive check-up/fixin Pump of diverse kind/calibrate labs instruments/operates main instruments in a water plants
Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management
A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.
Operations Supervisor - Overseas experience
I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   [ 20 ]   21   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com