Resume - I have worked in th Alberta and Saskatchewan oilfield since 1983 doing a variety...

Misco Jobs

Resume #83978

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS

* Over 20 years of experience working in various aspects of the oilfield industry
* Worked as a branch manager for ABB Vetco Gray Canada Inc.
* Hired and trained employees, in a variety of positions, both in a shop and field environment.
* Sales experience in the wellhead and valve industry.
* Worked as a Valve Service Truck Technician, Derrick hand, Rental Tech, Tree Saver Technician and Slickline Operator.
* Performed Fluid Shots, Dynos, with Echometer remote & manual fire high pressure gas guns.
* Good knowledge of the North and South Peace areas.
* Worked as a shop foreman at a well servicing company. Responsible for purchasing P.O's Recertification's of overhead equipment and general shop duties.
* Worked as a rental technician for HiAlta Energy Services

EXPERTISE

Management
* As a Shop Foreman, trained new hires to build, service and pressure test wellhead equipment and valves.
* Sales experience in the wellhead and valve industry.
* Took inventory, recorded and reordered wellhead equipment stock.
* Worked as a Derrick hand: trained Rough Necks.
* Worked as a Valve Service Truck Operator: trained helpers in the field.
* Worked as an Anchor Truck Operator/Line Locating experience and ticket.
* Set up new valve shop and service unit.
* Delivery and set up of light towers office trailers and general oilfield equipment.

Mechanical
* Performed Fluid Level Shots, Dynos with Echometer Equipment.
* Serviced and repaired valve and wellhead equipment.
* Serviced and repaired wireline tools and maintained truck.
* Serviced equipment in valve shop.
* Worked as part of a B.O.P nipple-up crew using hydraulic torque wrenches.
* Managed and maintained rental equipment.
* Rigged up different services pertaining to the task at hand on well: fracturing, acidizing, coil tubing, wireline services and snubbing unit etc.
* Worked as a Wireline Operator on a Slickline wireline truck

Tree Saver Technician
* Rig up of tree saver tools and flanges for tubing and casing frac jobs.
* Maintained valves and mandrels on tree saver.
* Ran picker unit install tree saver tools.
* Deliver and set up well site satellite systems.
JEFF T. CHARTRAND
Page 2
C: (780) 512-8444
Email: jt-chartrand@hotmail.com

WORK HISTORY

Worked in the oilfield for twenty years at the following companies:

ABB VETCO GRAY CANADA, Grande Prairie, AB
Stream-Flo Industries, Grande Prairie, AB
Optimax Well Enhancement, Zama, AB
Tree Savers International, Grande Prairie, AB
Universal Isolation Tools, Grande Prairie, AB
Rockwell Servicing Partnership, Grande Prairie, AB
Trinidad Well Servicing, Grande Prairie, AB
Great Plains Well Servicing Corp. Grande Prairie, AB
Hialta Energy Services, Grande Prairie, AB

TRAINING

Alberta First-Aid Expires 2011/September
C.P.R Expires 2011/September
H2S Alive Expires 2009/May 16
T.D.G. Expires: Current
W.H.M.I.S Expires: Current
P.S.T Expires 2009/July
Fall Protection Expires 2011
Fall Rescue Expires 2011
Ground Disturbance Expires 2008/February
Confined Space Expires May 29/2010
Forklift Safety Expires May 15/2010
GOTI Expires July 09/2010
PST Expires July 04/2009
Echometer Total Well Management

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1484)

Go to Search Parameters...

Brief Description

Over 28 years professional experience IT and SAP SECURITY

Master Electrician with Millwright experience

32 years exp in seismic data processing. QC and interpretation

Instrument technician

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

I have experience as a tool pusher and driller.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

Automotive Painter

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

Experienced derrick operator, floor hand, roustabout, and driller

I have been working as a mechanical technician for 19 years. I also have welder and fitter skills and a qualification in Engineering.

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

QA/QC Coating Inspector NACE Certified # 10362

Driller-15 Years Toolpusher-3 Years Oilfield Experience 30 Years

I have practiced my knowledge and expertise in these fields: Gas Measurement, Gas Plant and Gathering Operations, Management, Safety and Environmental awareness.

14 years of oil&gas,petrochmical QC and construction experience

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Seeking mechanical supervisor/mechanic position

Extensive experience in power, petrochemical and utilities plant startup, operation and training

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

14 yrs experience in general welding and fabrication. I have been passed the TESDA (Technical Education And Skill Development Authority) National Competency Test II of 6G SMAW,6G GMAW, and 6G GTAW. Competent of high pressured pipe welding and blueprint interpretation

I have worked in th Alberta and Saskatchewan oilfield since 1983 doing a variety of work. From labour jobs to shop forman to managment.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

Free! I have been in the Oil & Gas industry for the last 19 years. I have worked my way up the ladder from floor hand up to Rig manager and the last seven years as Well Site Supervisor.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

Have surveyor, title abstractor, draftsman, networking and landman experience.

Piping supervisor/ Project Manager

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

I have worked over in iraq working 12 hours a day seven days a week straight for tree months at a time in all types of conditions.....worked as a V S C Manager for 2 1/2 years over in Iraq

Driller/Toolpusher looking for over seas position,has cyber, Top drive & directional experience, 7 years drilling , 15 years derricks, 6 years work over , 1 year geothermal experience. 27 total years experience.

Development Geologist in a clastic reservoirs, integrating Seimic, wire line logs and Core Data. experince in basic petropysical analysis and geocellular models

DRILLING SUPERVISOR , 22 YEARS EXPERIENCE IN OIL & GA INDUSTRY ,OFFSORE & ONSHORE AS A SUPERVISOR FOR 18 YEAR ,DRILLER ,TOOLPUSHER, RIG MANAGER AND DRILLING CONSULTANT

I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET

Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.

Free! Over 25 years experience both Hands On, Inspection and Management

Marine electrical fitter, 20 years experience, trade qualified, was a foreman in the field. Skilled in mechanical / hydraulic servicing as well.

Mud Engineer

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

at present working on cyberbase rig totally computerised

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out