Resume - I&C Technician with geothermal experience

Misco Jobs

Resume #84151

CONTACT INFORMATION:
View contact information...

Experience

8/2006 ¡V 11/2008
Fagen Incorperated Granite Falls, Mn.
Startup and Commissioning Corporate Representative

Successful check out, startup and commissioning of 12 ethanol plants totaling nearly 1 billion gallons per year capacity.

Activities and responsibilities included:
„« DCS programming verification and modification/correction feedback
„« DCS network functionality including fiber optics
„« DCS I/O loop checkout
„« Mechanical functional checkout of all rotating equipment
„« VFD programming
„« Tank farm, plant vessels, and piping system water trials
„« Calibration and functionality of all field devices such as transmitters, valve actuators, sensors and switches
„« Plant maintenance personnel training
„« Plant startup and performance run

2004 to 2006
Cal Energy, MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants. Designed and installed a fully documenting automatic pressure calibration system using Druck hardware and GE Sensing InteCal software. Configured 3000 plus instrument database and trained I&C technicians on use of system.

Systems supported and other responsibilities:
„« Foxboro I/A DCS running on Sun Unix platforms
„« Emerson Delta V DCS running on Microsoft NT4
„« Woodward Governor, Triconix, and Mitsubishi governor control systems
„« Fuji, Westinghouse, Mitsubishi and GE steam turbines
„« Bently Nevada temperature and vibration monitoring systems
„« RTX and Hathaway plant data logging systems
„« Root Cause analysis of turbine trips and equipment failures
„« PLC and ModBus SCADA systems
„« I&C maintenance, repair and calibration on all field devices including transmitters, Hart and FieldBus devices, valves, hydraulics, etc.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC Control System Engineer

Activities included:
„« HVAC control system engineering and design
„« Hardware specification and engineering submittals
„« DDC control system software logic design for chillers, boilers, air handlers, cooling towers and pumping systems using Delta Control software
„« Computer HMI screen design using Delta Control Orca View software
„« BacNet configuration and device networking checkout and startup
„« System installation, checkout and commissioning.
„« Customer training, drawings and O&M manuals

1998 to 2001
Systemation, Applied Services Division, Fairport N.Y.
Systems Integrator

Successful systems upgrade at the Rochester NY Van Lear WWTP included three Flottweg centrifuges for sludge dewatering. Binghamton ¡V Johnson City WWTP plant wide upgrade including new odor control building.

Supported systems and activities:
„« Citec software
„« Opto22 I/O
„« Modicon PLC's
„« Provided Foxboro factory trained field services
„« Supported Sales division with field services

1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
Part Owner

Started and grew business supporting 5 full time employes.

„« General business management
„« Manufacturer's representative for several major lines of instrumentation
„« Repair, calibration, maintenance, installation and start up of instrumentation and control systems
„« Provided technicians for plant shutdowns and outages

The Foxboro Co., Foxboro, MA.
Systems Analyst

Commissioning of upgraded (pneumatic to electronic) reactor vessel cooling system, Yankee Atomic Electric, Rowe Ma. Checkout and startup of Niagara Mohawk Unit 7 Oswego NY Steam Plant.

Activities:
„« Provided field services for entire Foxboro product line
„« Specialized in power system and boiler control system start up and commissioning for utility and industrial fossil fuel applications.

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.
Additional course work
Invensys Triconix System Maintenance for turbine controls
Foxboro I/A System Maintenance 2005
CiTec software configuration
Delta Controls OrcaView software configuration
BacNET configuration
BJ Systems Software (QNX) for process control
Foxboro/Eckhardt control valve sizing and specifying school
Foxboro Service Representative Power Systems Course for boiler and combustion control and commissioning
Foxboro Users course on power systems and boiler control
Foxboro Service Representative Training School
Foxboro Spec200, VideoSpec/MicroSpec, VideoSpec4, Spectrum DCS, Fox3/Fox300 and Foxboro scaling course for process control.

Licenses
F.C.C. General Radio Operator license (Old FCC First Class Commercial)
F.C.C. Amateur Radio License Advanced

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1484)

Go to Search Parameters...

Brief Description

Rig Electrician with over 10 years of service in the oil Industry.

willing to travel, would find it a bonus to any contract or in house petroleum land man position.

Well test supervisor

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Machinist- licenced

COATING INSPECTOR CV

Instrument Supervisor

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Turbine tech.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Experienced Floorhand/Roughneck

I wish to work in a challanging environment of the oil industry

Attorney and Landman with excellent tract record of acquiring Oil and Gas Leases. Over 10 years title experience, with specialized training in probate and non-probate transfers of property interests; including trusts and all matters relating to the administration of estates. Diversified experience

I’m extremely interested in obtaining a post either as Geophysicist / Geologist / Petrophysicist or any relevant position that fit my education back ground. I have outlined some working experiences and developed talent in geology (Geocience) about myself in the Resume attached for consideration

• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Senior Mechanical Draughtsman(MEP)

Asset Management Application Support

To Become employed as a Instrument Tech, Instrument Designer, or Process Operator

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

sales, marketing, business development general management

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Welder

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

Worked service rigs for 2.5 years

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out