Resume - Piping superintendant with 35 years experience in the oil and gas industry

Misco Jobs

Resume #84792

CONTACT INFORMATION:
View contact information...

Marital Status Married

Qualifications City & Guilds 1, 2, 3 & Advanced Standard
SMTD Supervisory / Management training M.I.S.M

TRAINING C.O.S.H.H Assessor
ECITB - Health & Safety.
Emergency Response Training
Current Offshore Survival Certificate

Experience Piping Fabrication. Offshore Hook up/ Shutdowns & Maintenance
Hydro testing. N2 leak testing. Punching out of systems.
Construction Erection and Installation
Subcontract Co-ordination
Quality Control / Certification Hands on
Fit Out FPSO I Modules / Skids
Manpower Supervision

Additional Skills Construction supervisor with extensive international experience of Offshore Engineering Projects. Within the following Sectors: Oil & Gas, Power Generation, Pharmaceutical, Water Treatment,
LNG Plants. Shutdown & maintenance onshore/ offshore.

Countries Employed UK, Belgium, Holland, Norway, Finland, Sweden, Saudi Arabia, Thailand, Egypt and Nigeria.Kazkhstan In these countries, many of the projects involved supervising a multi-national workforce.

Feb 2008 – present – Eastern Petrochemical
Sharq 3rd Expansion Project
Jubail Industrial City.
Saudi Arabia
Position held – Area Piping Superintendent for
Shaw Stone & Webster.

Overseeing sub–contractors, tracking progress and monitoring schedules. Responsible for installation of all pipe work, punching out of systems for hydro testing, Reinstatement, Handover to commissioning of all systems. Assisting pre–commissioning, Vendors. Liaison with all disciplines on daily matters to ensure construction progress in accordance to the safe system procedure.

March 2006 – Feb 2008 – Kazakhstan, Atyrau oblast, Tengiz Oilfield

Position held – Construction Field Superintendent, Worley Parsons

My responsibilities include:

* Overseeing and looking after various Sub-Contractors.
* Fabrication. Installation of new pipe work and hydro testing.
* Tracking & reporting all trade progress.
* Calling off materials as required.
* Ensuring that construction has been completed to specifications

November 2005 - March 2006 - KBR. Shell Nelson Platform.
Fire Water, Seawater Pumps & Caisson Modification.

Position Held, General Foreman.

My responsibilities include:

* Responsible for the routine control and discipline of all trades & vendors.
* Tracking & reporting all trade progress & preparing a 24 hour look ahead with discipline
Engineers, attending P.T.W. meeting to ensure the required permits would be available.
* Reporting progress on a daily & weekly basis liaison with the client.
* Liaison with QA/QC department, collating & raising all necessary quality documentation that was required in closing out implement work packs,

July-2004 to August 2005:- AMEC Engineering Shell FPU, Bonga, Nigeria
Position Held; Piping Engineer

My responsibilities include: -

* Piping engineer on the hook-up of the FPSU working to a detailed plan for construction.
* Calling off materials as required, raising and revising job cards in JMS, to carry out modifications to the base scope construction.
* Ensure that all Sis have been implemented.
* Ensuring that construction has been completed to specifications and witness hydro testing of systems and handing over completed systems to commissioning.
* Ensuring completing and signing off all relevant paperwork involved with the WINPCS system.

March-2004 to July: - MW Kellogg, Middlesex
Position Held; Piping Superintendent

My responsibilities include: -

* This job entailed overseeing the daily construction on Train 5, LNG Plant, Bonny Island
Nigeria.
* I liaised with Daewoo Construction who was the main contractor. I attended management and daily progress meetings as well as safety briefings.
* Ensuring that construction has been completed to specifications and witness hydro testing of systems and handing over completed systems to commissioning.
* Ensuring completing and signing off all relevant paperwork involved with the WINPCS system.

September 2002 to September 2003:- R Blackett Charlton, White Street, Walker, Newcastle upon Tyne
Position Held; Field Engineer.

My responsibilities include: -

* Responsible for overseeing subcontractors on the M W Kellogg Int NC2X Project in Antwerp, Belgium
* Carried out the initial erection through inspection, hydro testing, reinstating and final turnover of systems.
* Day to day troubleshooting of engineering/piping/steelwork problems including issuing Field Trouble Reports and proposing solutions to filed problems.

2002 to 2003:- Amec Shutdowns and Maintenance

Position Held; Piping Suuperintendent

My responsibilities include: -

* Various shutdown contracts.
* Supervision of a multi-disciplined squad.
* Fabrication. Installation of new pipe work and hydro testing.
* Planning and raising Permits to work.
* Holding toolbox talks.
* Responsible for liaising with process operations and other area teams to ensure adherence to overhaul and project schedules.
* Ensuring that all work was carried out in accordance with the Safe Systems of work procedures and clients permit to work system.

April 1999 to July 2000:- Brown & Root/Halliburton

Position Held; Construction Supervisor

My responsibilities include: -

* Various shutdown contracts.
* Supervision of Egyptian national and expat workforce on the Obaiyed Field Gas Plan – Western Desert Egypt.
* Responsibilities included final punching of systems for handover to commissioning.
* Supervision of the fabrication, installation and testing of pipe spools.
* Site surveys to identify manpower and material requirements.
* Identification of engineering, design problems and formulating solutions.
* Liaising with all other trades and the commissioning group to enable planning of manpower allocation and maximum productivity.

August 1997 to January 1999:- P T McDermott, Indonesia. Offshore hook-up.

Position Held; Construction Supervisor

My responsibilities include: -

* Supervision of mixed race workforce offshore, working on the Total Bangkot complex constructing new process facilities and completing structural modifications to existing plant.
* Supervision of mixed race workforce offshore, working on the Total Bangkot complex constructing new process facilities and completing structural modifications to existing plant.
* Supervision of same workforce for the hook up of the Unocal Pailin platform, both jobs being in the Gulf of Thailand.
* Main duties were the supervision of the fabrication installation and testing of pipe spools from 1" to 24" in a variety of materials including Bond strand, duplex and cooper nickel.
* Responsible for site surveys identifying manpower and material requirements.
* Identified engineering and design problems and formulated solutions.
* Liaised with all other trades and the commissioning group to enable planning of manpower allocation and maximum productivity.
* Later in the project, assume sole charge of N2 leak testing.

November 1995 to October 1996:- Chevron OIL/AOC

Position Held; Multi-Discipline General Foreman

My responsibilities include: -

* Responsible for the routine control and discipline of all trades on the Alba Phase 2 Revamp.
* Organising vendor support.
* Tracking and reporting all trade progress and preparing a 48-hour forward look ahead with the discipline engineers and attending the permit to work meetings to ensure the required permits would be available at the correct time.

October 1994 to November 1995:- AOC International

Position Held; Foreman/Pipe fitter

My responsibilities include: -
* Responsible for the direct supervision of 20 pipe fitters on the Point of Ayr Gas Terminal.
* Other duties included the co-ordination of service trades.
* Hydro testing of completed spools.
* Reporting progress on a daily and weekly basis and liaison with the client.

June 1993 to October 1994:- Shell / Nelson Hook up.

Position Held; Piping Foreman promoted to General Foreman

My responsibilities include: -

* Supervision and overseeing of pipe fitters, welders and allied trades in a high discipline and safety conscious environment on the Nelson hook-up.
* Main duties were planning and raising permits to work, holding toolbox talks, overseeing the fabrication, installation and testing to IP6 riser specifications of 8" super duplex spools.
* Promoted to general foreman in the later stages of this project.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1482)

Go to Search Parameters...

Brief Description

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR

HVAC FOREMAN

Rigging & Lifting Specialist

Document Controller with 10 years experience in Oil & Gas industry

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

Driller with 9 years experienc on land rigs and 24 yrs. total exp. in drilling field

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

Drilling Supervisor with directional, horizontal experience .

Have more than 13 years of experience in log interpretation

Document Controller - Certification Supervisor cum Math/Physics/Computer Instructor

ITI(NCTVT)ELECTRICIAN) with liecence

Level III vibration Analyst with electronic and mechanical background

Instrument Pipe fitter / supervisor

More than 15 years working experience in Electrical/Electronics & Telecommunication.

Instrument Technician Radio technician Scada-moscad

My strengths lie im my ability to manage available resources and communicate with others

Driller / Tool Pusher (Onshore / Offshore)

Experienced PROJECT MANAGER with 10 years experience training and leading development teams to

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.

15+ years of IT experience and 6 years of SAP BWv7 and SAP R/3 ABAP experience. I would like to introduce myself as a Consultant, having an Attitude & Aptitude for Analysis, with range of skills in Technical arena. I do have solid Experience in Conceptualizing, Developing.

Master Electrician

Qualified Welder / Fitter / Mechanic

Piping superintendant with 35 years experience in the oil and gas industry

Diagnose and repair engines, transmission and final drive systems including manual and automatic transmissions

Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w

Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).

Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

I have worked in the Oil & Gas industry for over 20 years

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Senior Welding Inspector QA/QC

20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.

been welding for 25 plus years...

Industrial Electrician

Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.

I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.

I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing

Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience

39 years experience running both surface & mineral titles & preparing reports

Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.

Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.

I am seeking a long term employment contract within a company as Rigger.

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.

23 years of sales experience including positions as a sales representative, sales trainer and sales manager. I work very well with the public. I know how to close the client and get the answer I am looking for.

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out