Resume - iosh managing safely and osha in construction safety and health qalified hse off...

Misco Jobs

Resume #85189

CONTACT INFORMATION:
View contact information...

Post applied for: HSE OFFICER
(NOC available from the present employer)
________________________________________
SUMMARY
________________________________________
Profile: Male, 29, Married
Nationality: Indian
Highest Qualification: Graduation
Total Experience: 8.9 years
Current Location: Qatar
Current position: Hse Officer
Company: Fata EPC -Italy
(Reporting to: HSE Manager)

________________________________________WORK EXPERIENCE
________________________________________

Duration: March 2008 - Present Doha,Qatar
Position: Hse Officer
Company: FATA EPC.
Client: Qatalum
Project: Awarding of world's largest Aluminum smelter Plant ever constructed in one phase with a dedicated Power Plant, Anode Baking Plant and Cast house. Joint- Venture Project of Hydro (Norway) & Qatar Petroleum.
Roles: Overall Supervision and managing of subcontractor¡¦s.
Duties & responsibilities:
„« Hazard identification and risk assessment at site.
„« Preparing reports of all incidents, accidents and near misses.
„« Monitor consistent use of PPEs, execution of routine inspection of tools and equipment, adoption of environmental protection measure, application of job hazard analysis, etc.
„« Reporting to HSE manager

Duration: Nov 2006 - Mar 2008 Dubai, UAE
Position: Safety Supervisor
Company: Shinryo Corporation EPC - Japan

Project:
„« District Cooling Plant Project
Client: Nakheel
Company Information: Japan based Multinational EPC Main Contractor engaged in the field of Engineering & Construction of Cooling Plants, design and construction of Cooling Towers, Cooling Water Tanks, and Chillers & Pipe Lines.
Roles & Responsibility:
„« Ensure all new employees at site undergo safety orientation training prior to start work at site.
„« Ensure proper implementation of Tool Box Talks at work site.
„« Ensure all in PPEs and proper use of the same.
„« Ensure good housekeeping and proper stacking of materials.
„« Ensure safe use of lifting gears at site.
„« Inspection of construction equipments prior to start work at site.
„« Inspection of Permit to work along with attached documents at site prior to start work.
„« Keep an investigating and records maintaining system of site accidents, incidents, near misses etc.
„« Ensure proper implementation of safety policies at site.
„« Control the Road signals, Traffic and security personnel.

Duration: 2004 July- 2006 September Ahamadabad, India
Position: Safety Inspector
Company: Shreeyam Health Care
Nature of work: Carried out the duty as Safety Inspector for Hospital Electronic Devices in connection with medical handling equipments for a period of 2 years. Controlling all the vehicle movement, Visitors entry, Fire Fighting equipments maintenance and proper safety and security of the warehouse along with implementation of prevention and precautionary methods from fire and damage.
Duration: April -2000 to May -2004 Bangalore, India
Company Name: GE Thermo metrics India Pvt Ltd
Position: Safety Inspector
Company Info: Multinational Company in the field of Manufacturing and exporting of Thermistors. Worked as Safety Inspector for a period of 4 yrs handled storage & transportation of the Electrical & Electronics goods. Carried out the duty of inspecting fire fighting equipments, maintain and control the transaction of the vehicular movement, entry of the vehicles and proper and safe loading and unloading of goods.

________________________________________
Education________________________________________
B.A English (Calicut University, Kerala, India, ongoing)
________________________________________
PROFESSIONAL CERTIFICATES
________________________________________
„« IOSH Managing Safely -THE EXPERT GROUP, Doha- Qatar (June 2008)
„« OSHA-30 hours -Construction Safety And Health - Rocky Mountain Educational Centre Sharjah- UAE (July 2007)
„« Basic Rescue - Cirtificate of Training- Marine &Offshore Global Pty Ltd-AS/NZS
„« Work Safely At Heights- Certificate of Training - Marine & Offshore Global Pty Ltd- AS/NZS 1891.4 (2000) Standards.
„« Certified First Aider- Venture Gulf Training Centre, Doha, Qatar(Dec 23 2008)
„« Basic Scaffolding-- Technical Inspection Bureau, Abu Dhabi.
„« First Aid Training- St. John's Ambulance Association, Bangalore, India.(2003)
„« Fire Prevention& Fire Fighting- awarded ¡* Life Saver¡¨ certificate -- Usha Armour, Wilson Garden, Bangalore, India ( 2001).
„« Trainings undergone- Excavation, Permit to Work, Emergency Procedure, Commissioning Work permit procedure etc, Venue- Qatalum Project Site Office.
________________________________________
ITS SKILLS
________________________________________
Windows & Office tools
WINDOWS 98 & M.S OFFICE 2000, Internet, Typing Speed- 40 words.
________________________________________
LANGUAGES
________________________________________
English- Fluent
Hindi- Fluent
Malayalam - Native
Arabic- Working knowledge

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1485)

Go to Search Parameters...

Brief Description

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

Fire Fighter I & II (Accredited at SAESI), BAC (Registered at HPCSA)

NDT

Administration, Marketing, Operations & Computers

Chemical Engineer. 2 years experience in minerals refinery and processing plant with BhpBilliton Nickel West - Australia. Responsible in production on day to day basis. Familiar with pumping, mass and energy balance, hydromettalurgy, ball mills, hydrocyclones, Hysys, LNG, Gas sweetening process.

Timed served Mechanic with safety certification and good leadership skills

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

I believe my experience in organization, projects and maintenance in the world largest methanol - petrochemical production site and other experience in foreign trade can help in implementation of your company's highest production, organisational and marketing standards.

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

I am a hard worker that can follow directions I'm safety concious totally drug and alcohol free with experience in a multitude of different fields

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

Journeyman Instrument Technician with 7 years experience in the oil and gas industry

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

Blueprint Reading - Mig, arc and gas welding

Have good knowledge of the principle, practice and procedure of geology. Familiar using a personal computer with Mapinfo, Microsoft Office, Microsoft PowerPoint, and email / internet systems. Fair in English , both oral and written.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

Oil and Gas Leasing, Mineral Title research for the purpose of Leasing, Building Drilling Title Runsheets for Title Attorneys and Title Opinions, Title data entry, Deed plotting, Right of Way Title, Right of Way Acquisition

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out