Resume - 4 years experinece in electronincs and electrical related works and in embedded...

Misco Jobs

Resume #85473

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To attain a responsible and a challenging position where I can exploit my knowledge and technical skills, that encourage continuous learning and creativity, providing exposure to new ideas, which stimulates professional and personal growth.

EXPERIENCE DETAILS:

ƒå Professional experience of 4 years in Embedded Systems Design & Development and Testing.
* 2 years of Experience in Embedded System design and Development.
* One year Experience in Verification and Validation in the Medical Devices.
* One plus years of Experience in Software testing in avionics domain.

AREAS OF EXPERTISE:

* Design and development of Embedded Systems.
* Good experience in Firmware Development.
* Good Working experience in 8-bit and 16-bit microcontroller architecture.
* Good working knowledge in serial communication protocols like I2C, SPI, UART, RS232, and RS485.
* Good Experience in C / Assembly Language programming.
* Very good knowledge in the analytical of Electrical Hardware Circuit.
* Electrical DFMEA (Design Failure Mode Effective Analysis).
* Experience Verification and Validation of the Medical devices.
* Good knowledge in writing test strategy and developing protocol.
* Well understanding of the medical standards like ISO: 13485 and FDA guidelines.
* Good knowledge of the Compliance Testing.
* Working experience in EMC/EMI.
* Development of test cases Using RTRT for avionics software.
* Good knowledge in the DO-178B
* Development of Low Level Requirement.
* Experience in the DOORS, Dimensions and PVCS.

DOMAIN EXPERIENCE:

ƒå Medical Devices.
ƒå Aviation.
ƒå Industrial Automation.

WORKING EXPERIENCE:

Organization Designation Duration
HCL Technologies Chennai Project Engineer 23 Apr 2007 -till date
Integrated Process Automation (IPA) Pvt. Ltd. Bangalore. R&D Engineer July 2006 ¡V March2007
Adpro Automation Pvt. Ltd. Bangalore. R&D Engineer Aug 2005- June 2006

EDUCATIONAL QUALIFICATION:

M. Sc. Applied Electronics (Bharathiar University).
B Sc. Electronics (Calicut University).

PERSONAL DETAILS:

NAME: SAJITH B
DOB: 27-April-1977
Contact Details.: psajithb27@gmail.com,
Mobile: +91-9884446398.

PROJECTS:

Medical Projects:

Description of the Project1: [Cryo Balloon Ablation System]. The CBAS-console consists of five major sections Industrial PC, RTSE circuit, Pre-Cool circuit, Vacuum Pump section, Power Distribution section. The Industrial PC provides the GUI during the console operation. The RTSE circuit receives the command from industrial PC and performs controlling and sequencing of all actions that are involved in controlling the flow of N2O to the balloon catheter. The pressure and temperature signals from various points of the N2O flow path are received and processed by the RTSE circuit.
The Pre-cool circuit is used to maintain the cryogenic temperature (-30 deg C) before entering in to the catheter. The vacuum pump is used to maintain a predefined value of vacuum during various states of the Console operation. The console receives the inner/outer balloon pressure and inner balloon temperature through the catheter board electronics. The communication between Console and the catheter board electronics happens through serial interface. The console is powered with universal AC input and all the electronics in the console is powered by medical grade power supply.

Description of the Project2: [Selective Neural Stimulation]. The SNS technology is a neuro-stimulation battery operated device, which transmits a controlled waveform designed to stimulate specific nerves. This SNS waveform is composed of a carrier signal and a pulse envelope. The carrier waveform is designed to be of sufficient frequency to overcome tissue impedances. The pulse envelope contains specific pulse width, amplitude and shape information designed to stimulate specific nerves. SNS can be used to treat a medical disease condition called overactive bladder.
The stimulation device in its final patch form is placed on the skin for a period of up to seven days. The user can adjust the patch waveform parameters through an optical link via a handheld controller. In addition, the controller can be connected to a PC via a hard wired serial link. The hard wired serial link can be used to upload data stored on the controller and allows a wider range of parameter adjustment for patch unit.

Responsibilities:
1. Requirements Study and analysis
2. Verification Plan development
3. Development Test Strategy and Protocols
4. Dry Run execution.
5. Testing.
6. Development Board Test protocol Project2 (SNS)..
7. Development of DFMEA for Project2 (SNS).

Aviation Projects:

Description of the Project 1: It is a requirement based testing. SCOE (Software Common Operating Environment) is an ARINC-653 compliant system to manage all the operations in airborne equipments. SCOE Software is a Level A software that needs to adhere to all the stringent objectives defined in DO178B standards. As per DO-178B Structural coverage is mandatory for Level A software. The objective of this analysis is to show 100% coverage in terms of statement coverage, decision coverage and MCDC. If there is any lack of coverage then justification is provided. In addition to that unit testing is also done. Structural coverage is performed to ensure that there are no dead code and unreachable code. Unit testing is performed to ensure that the written software adheres to the low level requirement.

Responsibilities:

1. Requirement Study and analysis
2. Test case development as per DO-178B
3. Automation of test cases
4. Run the test cases by using RTRT Tool, Simics simulator and On Target

Description of the Project2: Smiths_Scoe-LLR_Gen project for development of Low Level Requirements for the features File System, AFDX and HMEvent Interface modules in the SCOE (Software Common Operating System Environment).

Responsibilities:

1. Requirement Study and analysis.
2. Generation of low level requirements for SCOE.

Industrial Automation Projects:

Description of the Project 1 (Belt scale): Belt conveyors are accepted means of moving bulk materials in mining and process industries. With the advent of this fast mode of transportation, accounting the quantity of material transferred assumes great importance. Belt scales are the most reliable index of material accounting and can be measured directly and precisely, which offer accurate weighing systems to maintain higher accuracy and better accountability in the process. the systems employs a weighing frame with two or four load cells to sense the material load on the belt, a tacho generator to measure the belt speed.

Description of the Project 2 (Ethylene Oxide & Carbon dioxide filling Machine): This project is developed for Pest Control (India) Pvt Ltd, Mumbai, for filling liquefied EO & CO2 in different size of cylinders. It consists of one platform mounted over load cells controlled and monitored by the processor and display unit. Operator can enter the set value and other accuracy limiting parameters through keyboard. Once the operation started the set quantities of EO & CO2 will be filled in the cylinder. System is interfaced with a printer which is placed in a remote location through RS485, so that after each operation, required parameters will be printed out automatically along with current time and date.

Description of the Project 3 (Hopper Weighing System): Description of the Project: The hopper weighing system developed with four set points. The system would always monitor the weight on the hopper, if each set point is achieved corresponding output is activated there by the material flow was controlled The system was designed to be used ADC 7730 which is SPI compatible. The system includes max7219 display driver IC, additional memory, D/A Converter AD420 and the system has an expansion

Platform Used 8051 family IC's
Language Used C (Keil Cross compiler)

Responsibilities:
1. Requirement Study and analysis
2. Designing and Development Hardware section.
3. Software development for the Firmware and Display.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1489)

Go to Search Parameters...

Brief Description

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.

Quality Control Senior Chemist

My qualification are heavy equipement technician specially on hydraulic system ,trouble shooting,repair modification and commisioning

4 years experinece in electronincs and electrical related works and in embeddeded sytems

Young Mining Engineer (short experience in geophysics - jr Observer, HSE Officer, and coal mines - trainee)

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

Planning/Schedule Engineer,Maximo IMplementor,

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Scaffolding supervisor, 12 years experience in oil and gas projects, international experience, 200+ staff on last project, teaching to locals experience

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

Crane Driver, Rigger, Scaffolder, Dogman, Multi-skilled operator, Shutdown & Construction experienced.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

I'm a Strategic Marketer for Oil Pipe line for Baosteel Iron and Steel in Indonesia, and currently trying to flap my wings abroad for experience and better salary

Good analytical mind, good communication skill, result oriented and team player.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System),HIMA PLC (Emergency Shutdown System),Emerson Process Management -Delta-V DCS,Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System ),ESD,F&G

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations supervisor or as an inspector. I have over 25 years experience in the natural gas transmission and distribution pipeline industry.

Recent MBA grad with spl in Asset Mgt; bachelors in IT;3 yrs wrk exp varied business segment

8 Years extensive experience in QA/QC inc: India and overseas.

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Looking for any position with good pay and benefits

Sales and Office Administration for Steel Manufacturing Firm

I have worked in natural gas and oil production plants where duties included both operating and repairing associated equipment. I know how to operate most tools, heavy equipment and can fabricate a lot of my own parts.

Biomedical Engineer

Repairs, maintenance, wiring, troubleshooting schematic diagrams of cattlepillar control panel, wiring of the three phase starters e.g. star delta, rotor resistance starters, auto transformers, direct online starters, servicing and installing three phase motors, service of caterpillar alternators.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

I've almost 15 years of experience in inspection (construction like pipeline onshore, offshore, fabrication of pressure vessel, plant piping, and structures component.

Greenhand Roustabout course (Manual Handling, Safety Observation Systems, Risk Assessment, COSHH Awareness, Helideck Assistant). BOSIET (Basic Offshore Safety Induction & Emergency Training). NOGEPA. OPITO Approved Slinging and Lifting Operations' course. UKOOA Medical.

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

OSHA, Honesty, Windows, Ability to work with others, MSDS, Multi-tasking, Word, Detail Oriented, Forklift, Patience, Excel, High work standards & ethics, Safety Awareness, Leadership, Access, Results Oriented

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Quality dozer/blade/excavator operator in all aspects of construction

Rigger crane op scaf

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

Over 7 Years Military Experience in the Petrolum Supply Specialist Role. Have succeeded at various jobs in Sales, Marketing, Insurance and Mailroom Processing.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out