Resume - An experienced E&I construction supervisor/superintendent, three years college t...

Misco Jobs

Resume #85617

CONTACT INFORMATION:
View contact information...

Date of birth: 24th May 1959
Nationality: British

PERSONAL PROFILE

I'm an experienced reliable offshore/onshore electrical construction supervisor, with high aims and expectations. An excellent communicator with good leadership qualities who displays the ability to work successfully as part of a team, or on my own initiative. I have over 25 years experience in the industrial, oil and gas, chemical and power industry in electrical installation, testing, punch listing, precommissioning and final commissioning and handover.

EDUCATION

Attending Aberdeen Technical College 1975-1977

City&Guilds 236 Electrical & Electronic Installation (parts 1 & 2)
City&Guilds 238 I.E.E. 15th/16th Edition Wiring Regulations.

Attending Springburn College of engineering Glasgow 1977-1978

City&guilds Installation for Refrigeration Mechanics

Attending Tullos Training centre Aberdeen 1975-1976

Industry training board certificate in Electrical & Electronic engineering
…………………………………………………………………………

Class 2 Marine engineering officer certificate of competency (Issued 1996)

……………………………………………………………………………
1975-1980 Five year apprenticeship as an electrical/refrigeration technician
1971-1975 Ellon Academy. Aberdeenshire. 7 "O" Grades in Arithmetic. Chemistry,
Engineering drawing, English, History, Mathematics and Physics.
..............................................................................................................................................................

RECENT TRAINING AND COURSES
2009 - Consolidated permit to work (Ras laffan industrial city)
2009 - Permit to work (Qatar gas)
2008 – Offshore medical & compressed air compatibility (Valid 2010)
2008 – Permit to work signatory (RASGAS)
2008 – Permit to work (RASGAS)
2008 – Safety induction course (RASGAS)
2008 – H2S/Breathing apparatus (RASGAS)
2008 – Lockout Tag out (Fluor/Rasgas)
2008 – Permit to work (Fluor)
2007 – Total E&P work permit/safety training
2007 – Safe working with asbestos
2006 – ATEX
2006 – NEN EN 50110 & NEN 3140 Inspection low voltage installations/regulations
2006 – Offshore medical & compressed air compatibility
2006 – Nutec Refresher, offshore safety/emergency response. Huet & AP/AP+/LAP
(NOGEPA 0.5B) Valid 2010.
2005 – Safety for operational managers V.C.A.(NL)
2004 – Offshore medical & compressed air compatibility
2004 – Work permits training (Offshore Shell/N.A.M.)
2004 – NEN EN 50110 & 3140 skilled person for low voltage installations/regulations
2003 – N.A.M./Shell safety interactive video
2002 – Swagelok instrument tube fitting
2002 – Gyrolok instrument tube fitting

WORK HISTORY

Period: 2nd February 2008 – 28th August 2009 (Current de-mob date)
Company: Fluor Corporation Mideast/ Qatar Kentz
Function: Electrical construction field superintendent (onshore)
Employed as electrical construction superintendent to Fluor Mideast. In Qatar. Working in a project management construction team, on the RL (3) Common offplot condensate 1&2 project in Qatar reporting to the senior electrical lead. I was supervising the main electrical contractor and sub-contractors namely Kentz and Chicago bridge and Iron (C.B.I.) with around 300 personnel, mainly Indian/Sri-Lankan and Phillipino labour. Installing eight new condensate storage tanks in phase 1, and six in phase 2. Together with complete electrical and instrumentation packages, metering skids, 6.6Kv pumping/transfer systems. Tank and piping cathodic protection installations. New substations and control building, U.P.S. Battery packs and rectifiers. Transformer (H.V./M.V./L.V.) and switchgear packages (11kv-6.6kv-415V) with neutral grounding resistors. After the construction phase was complete I am now supervising the punch lists for electrical, telecom and instrumentation. "A" and "B" check sheet completion and handover to the turnover groups until close out. Also work permit control and coordination, lock out tag out on live systems electrically and mechanically rotating equipment. Assisting commissioning/engineering, and carrying out any relevant design change notices.
Having completed my duties on the condensate project I was then put in charge of the "Berth 3A" project as electrical and instrument superintendent. This consists of the construction of three propane and butane ship loading arms, two metering skids and a surge skid with all instrumentation packages and required electrical systems, with hook up into existing electrical substation, and distributed control system. I have completed the construction and precommissioning phases, and am now assisting commissioning to completion.

Period: August 2003 – January 2008
Company: Fabricom oil and gas
Function: Electrical/instrument construction supervisor (Offshore)
Employed as electrical construction supervisor to Total E&P. I was responsible for the complete electrical and instrumentation change out of the H.V.A.C.System on the L7 central complex and L4A production platforms supervising our own electrical technicians and associated disciplines, from demolition of the old system through to pre commissioning, test sheet/mechanical completion, handover and completion packages. Work permit procedures, J.S.A. analysis and completion of method statements
Also working as senior electrical technician/supervisor on many major and smaller projects for Total offshore platforms including the L7CC, K6P, K5P, L4A, F15A and many unmanned satellite platforms. I've also been involved in projects for Shell/N.A.M. on the K81, K71, and for Wintershal on the A6A and P16A platforms. This involved top side hook ups, installation and commissioning of fire&gas systems, condensate pump handling systems, removal and replacement of existing panels for D.C.S. distribution and switchgear, extensive heat tracing projects and reading of piping diagrams, sub sea and platform wellhead hook ups including control panels and associated instrumentation work. Complete refurbishment of accommodation and H.V.A.C. together with power distribution and E.S.D. controls. Installation of variable speed drives and several compression projects involving "Solar" gas turbines and compressors. Test sheet completion, red/blue drawing mark ups and precommissioning.

Period: March2000 – July 2003
Company: Stork Industry services
Function: Senior Electrical Technician/Supervisor (Onshore/offshore)
Employed as senior electrical technician/Supervisor on the N.A.M./Shell Groningen long term onshore gas extraction project at four different locations. I was responsible for the complete new control buildings electrical and instrumentation installation work, this involved managing and installing the incoming power supply, M.V./L.V.transformers, harmonic filters V.S.D. drives, supervising east European cable pulling gangs, Installing and connecting U.P.S./Rectifier cabinets, marshalling cabinets, lighting systems, wellhead control panels and heat tracing. Smoke and gas detection systems. Test sheet completion, Q.C. and precommissioning of the entire locations. I was also supervising projects at two power stations, E.P.Z. Moerdijk with a gas capacity and regulation scheme, and at Eemshaven power station installing new injection controllers with instrument packages on eight gas turbines, and various other smaller projects at this location.

Period: September 1998 – February 2000
Company: Imtech
Function: Senior Electrical Technician (Onshore)
Employed as senior electrical technician on the "VAGRON" Biogas project in Groningen, Netherlands. Responsible for installation of new equipment, switchgear, marshalling cabinets, control systems, fire and gas detection systems, pumps and heat tracing, H.V.A.C. installation and testing, connection of electrical cabling and instrumentation multicores together with testing and precommissioning

Period: 1990 – August 1998
Company: P&J Johnstone
Function: Seagoing Engineer (Offshore)
Employed as a seagoing electrical engineer and responsible for the maintenance and repair of ships generation/propulsion engines.U.P.S. Rectifying system, voltage regulation, lighting and power distribution boards, Refrigeration and ice making facilities, ships control systems. I was also responsible for the supply of technical spares and documentation

Period: 1986 – 1990
Company: Self employed
Function: Electrical & Refrigeration technician (Onshore)
Self employed electrical and refrigeration technician maintaining and installing industrial air conditioning and refrigeration packages and complete electrical control systems. Cold storage plants, ice making plants and commercial units. Fault finding and repair.

Period: 1977 – 1986
Company: AMEC (Previously William Kemp.)
Function: Apprentice/ Electrical Technician (Offshore/Onshore)
Employed as an apprentice electrical/refrigeration technician and was fully qualified in 1980.Installation and service of industrial air conditioning and refrigeration, lighting and power distribution boards and associated control systems testing and inspection. Offshore and onshore contracts for Marathon and Oddeco drilling.

Period: 1975 – 1977
Company: Sparks of Aberdeen
Function: Apprentice Electrical Technician
Employed as an apprentice electrical technician but was transferred to William Kemp in Glasgow due to parental relocation.

INTERESTS

Fly fishing, football, swimming, home improvements (D.I.Y.)

REFERENCES

Referees are available upon request if required.

OVERVIEW

For most of my working career I have been employed in the oil and gas and industrial sector. I have experience with shutdowns, hook-ups, compression projects, H.V.A.C. Platform maintenance, heat tracing, installing complete new electrical/instrumentation systems, distribution boards,M.C.B.testing, modifications to existing installations, hydraulic manifold systems, generating systems, loop testing, electrical switching, A.C./D.C. motors,installingV.S.D.units, electrical testing, cable/multicore terminating and testing.Precommissioning and commissioning including all test sheet completion and acceptance documents, permit to work systems, red/blue electrical drawing mark ups, mechanical completion punch lists, electrical isolation procedures, reading schematic and line diagrams. Also construction of cable trays/ladders/supports, air conditioning and refrigeration, diesel generators (Deutz, Caterpillar, Volvo). Onshore gas extraction plants, U.P.S. battery back up systems, marshalling cabinets, Instrument connection, ships power generation, electrical decommissioning, working in asbestos contaminated zones with breathing apparatus, submersible wellhead umbilical hook-ups, installation of solar gas turbines/compressors, fire and gas/smoke detection and E.S.D.Shutdown controls. I also have a good working knowledge of storage tank and piping cathodic protection systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1484)

Go to Search Parameters...

Brief Description

Rig Electrician with over 10 years of service in the oil Industry.

willing to travel, would find it a bonus to any contract or in house petroleum land man position.

Well test supervisor

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Machinist- licenced

COATING INSPECTOR CV

Instrument Supervisor

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Turbine tech.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Experienced Floorhand/Roughneck

I wish to work in a challanging environment of the oil industry

Attorney and Landman with excellent tract record of acquiring Oil and Gas Leases. Over 10 years title experience, with specialized training in probate and non-probate transfers of property interests; including trusts and all matters relating to the administration of estates. Diversified experience

I’m extremely interested in obtaining a post either as Geophysicist / Geologist / Petrophysicist or any relevant position that fit my education back ground. I have outlined some working experiences and developed talent in geology (Geocience) about myself in the Resume attached for consideration

• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Senior Mechanical Draughtsman(MEP)

Asset Management Application Support

To Become employed as a Instrument Tech, Instrument Designer, or Process Operator

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

sales, marketing, business development general management

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Welder

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

Worked service rigs for 2.5 years

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out