Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #85721 next resume »» CONTACT INFORMATION: View contact information... PROFESSIONAL EXPERIENCES Name of Company / Country: United Company For Inspection & Quality (UNICO) Al Khobar, Saudi Arabia Position Held: Electrical/Instrumentation Engineer Personnel supply to SA ARAMCO (Oil & Gas) & SABIC (Petrochemical)projects Date Joined – UNICO: May 20, 2008 -May 22, 2009 Responsibilities/Duties : Familiar with International Standards like NFPA70 NEC, IEC, NETA, NEMA, IEEE - Preparation of inspection reports, testing & implementation, work accomplishment reports, issuance of procedures - Involvement in the preparation of project quality plan, inspection test plans, special work procedures, check list and reports etc., in coordination with the QA/QC team. - To inspect the Electrical Equipment to be used and installed as per client Inspection Test Plan (ITP), specification and quality manual. - Attended weekly projects progress meeting, Inspection Quality Activities. - Review and verify drawings/details as per Scope of work including Single line diagrams. - Surveying of installation-supports, conduits piping works. - Surveying installations and reports preparation in prior to the pre-commissioning. - Raising of R.F.I (Request for Inspection) prior to all related Electrical work & submitting to QA/QC manager. - Make material inspection report after receiving inspection is completed. - Conduct surveillance site monitoring to assure that the electrical activities are based on company standards before final inspection. - Support and assist the client during testing and commissioning of the equipment/system. - Control and update drawings, specification, submittals received and approved by the client for construction site copy/Issued for Construction. - Coordinate and attends weekly progress meeting together with the client and sub-contractors representatives. - Prepare daily, weekly, monthly, progress report. - Grounding grid installation inspection - Cable on drum meggering inspection. - Cable trench installation inspection. - Cable laying on trench inspection. - Conduit installation inspection. - Electrical Installation in classified locations inspection. - Electrical cables termination inspection. - Testing of all protective devices like Relays, CT's etc., - Preparing NCR's & submitting to QC supervisor/Manager. - As a Inspector, Maintain a record of Pro-active Violation & Violation after the facts of all sites activities Projects Assignment (From Recent) 1 Global Sources Project: SAUDI ARAMCO Khurais Industrial Support Complex Position: E & I QC Inspector March 24, 2009 – April 25, 2009 2 Development Equipment Materials Technology Establishment (DEMTE) Project: SAUDI ARAMCO AINDAR GOSP-3 (Gas Oil Separation Plant) Waste Water System Upgrade Project Position: E & I Engineer / QC Inspector Dec 2008 – March 20, 2009 3 Sinopec International Petroleum Services Incorporated (SIPSC) Project: Yanbu National Petrochemical Company (YANSAB Olefin) Position: QC Electrical Inspector July 2008 – Nov 2008 Name of Company / Country: US Distribution Asia Inc. for Reelcraft USA Position Held: Technical Service Engineer Period (From – To): Aug 15, 2004 – May 15, 2008 Responsibilities/Duties :Trained in Reelcraft HQ Indiana USA with Engineering department for product technical specifications and special applications. Improved technical communications between Asia Pacific clients and Reelcraft engineering department for special applications requirements. Communicate and travel abroad in Asia Pacific countries including Singapore to do technical service support to Reelcraft USA distributors. In mobile office, meeting distributors, engineers, directors, owners for technical application support with Reelcraft products. Name of Company / Country: SECA Computer Shop Angeles City Position Held: Desktop Support / IT Period (From – To): Jun 18, 2001 – May 18, 2008 Responsibilities/Duties: Assemble new desktop unit. Setup & maintain, upgrade HARDWARE/ SOFTWARE and LAN and Internet Network setting requirement. Troubleshoot / repair hardware or software problem on each desktop or PC unit for a walk –in or on-call service to customer. Knowledge on DNS, IP, local router on Internet & email setting, applications, upgrading, downloading, etc. Name of Company / Country: Lite-On & Kyushu Matsushita Industries Phil.Inc. Position Held: Facilities & Maintenance Engineer Period (From – To): May 25, 1999 – Jun 25, 2000 Responsibilities/Duties : Joined training for ISO 9000. Training on ISO Internal Quality Auditing IQA. ISO Procedural Training Understanding, Documenting, Implementing, & Maintaining an ISO 9000 Quality System. Performed and Improved Efficiency of scheduled maintenance for facilities and Clean Room equipments and instruments. Power Cost Savings as a result of Improved maintenance schedule. Represent L&K for plant inspection schedule of government agencies such as building officials. Name of Company / Country: EXPO PILIPINO Corp. Position Held: Electrical Supervisor Period (From – To): May 25, 1998 – May 22, 1999 Responsibilities/Duties : Acting as Duty Officer (Engineering & Maintenance Head) on scheduled basis. Direct supervision on electrical projects installation and maintenance schedule on electrical power system of the EX PO Theme Park. Owner's representative to witnessed Quality Control inspection of electrical system project. Name of Company / Country: HSIN TUNG YANG CO. LTD, TAIWAN ROC Position Held: Engineering & Maintenance Staff Period (From – To): Aug 2, 1994 – Jul 31, 1996 Responsibilities/Duties : In an ISO 9001 Certified Company, Diagnosed, Repair & maintenance of electro-pneumatic, electro-mechanical, electro-hydraulic, pneumatic machines used in production area including food conveying systems and central air conditioning and refrigeration system of the factory. Installation of new measuring and monitoring instruments such as pressure meters, volt / ammeters. Operation & maintenance of electrical power system. Technical report and English operating manual/procedure writing for specific production equipment being used. Name of Company / Country: AVANTEX MILL CORP. Position Held: Electrical Plant Services Period (From – To): Jun 19, 1993 –Jul 25, 1994 Responsibilities/Duties : Regular inspection monitoring, operation & maintenance of electrical power system from 69KV substation, 13.8KV switch gear, 440V, 220V & 110V systems of the plant. Name of Company / Country: Soft Touch Needle Craft Position Held: Electrician & Draftsman Period (From – To): Apr 25, 1988 – Jan 15, 1991 Responsibilities/Duties : Operation & maintenance of electrical power system Educational Qualifications/ Achievements - Bachelor of Science in Electrical Engineering Holy Angel University (Dean's List) June 1986 - March 30, 1991 Degree / Diploma - Jose Abad Santos High School (Science Scholar) June 1982 - March 1986 - Candaba Central School (5th Honor SPED Class) June 1976 – Apr 1982 Other Information - Registered Electrical Engineer: PRC ID # 3079 - Certificate of Completion: Calibration for Process Instrumentation Meralco Foundation Inc. Technical Institute (Mar 8 –Apr 19, 2008) - Affiliation: Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE Life Member since August 2, 1996 ) RECENT TRAININGS: - In-house UNICO training for Saudi ARAMCO & SABIC Project Quality Control Inspection Procedures and ISO 9001:2000 awareness training - Calibration Of Process Instrumentation (March 8 – April 19, 2008) - Reelcraft USA Product Technical Service training (22 Oct. – 6 Nov. 2007) Indiana USA - Reelcraft Indiana USA HQ, SEMA & AAPEX show Las Vegas NV USA (29 Oct – 11 Nov 2005) - Other training thru Continuing Professional Education SKILLS: Technical Service Support 5yrs, Industrial & Manufacturing Electrical / electronics experienced 8yrs, Computer Hardware & Software literacy 8yrs. REFERENCES: Will be provided View contact information... «« previous resume next resume »» Search Results (Resumes 1051 to 1100 of 1470) Go to Search Parameters... Brief Description Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field. I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT. I'm Mechanical engineer Worked in Vehicle Assembly Factory as Production & Calim engineer, am professional at Working with AutoCAD 3D & 2D, photoshop & flash web design, I speak English Very Well, and am fair at Spanish, self motivated, Active, work under team group, Managerial Characteristics Senior MWD Field Engineer or Directional Driller Trainee Coordinator Experience, Lead hand and familiar with EM, Gamma, Pressure and Logging while drilling Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs MINING/TUNNELING/MECHANIC I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects To obtain a suitable position in pursuance of promising career where I can make use of skills and experience for the growth of the organization, in conjunction with recognition and encouragement for hard work and sincerity. Network Engineer MCA + 7 year EXP Geologist. Has good theoretical knowledge (PhD candidate in sedimentology, MSc in petroleum geology) and practical experience of geology (3 years in mud logging). Practical understanding of the oil and gas exploration industry. Computer literate (StratWork, OpenWork, ZMAP, SeisWork) work in the industries of chimical, Engineer / EMS / SCADA / Electrical / Telecom / Power Sector Admisnistrador de sistemas, Systems Administrator, Ingeniero de Sistemas, Systems Engineer, Ingeniero de Software, Software Engineer, Ingeniero Telecomunicaciones, Telecommunications Engineer, Project Manager GIS Analyst/ Geoscientist...M.Sc. Geology, M.Sc. GIS, Cert. Data Processing and Info Tech 10 yrs R&D Lab experience - incl. Instrument analysis & troubleshooting, Inventory & ordering, supervisory role with students I prefer to work in a friendly environment and look forward to learn new knowledge & skills. Keen to learn and excel in job field to become a knowledgeable and experienced. HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp A skilled and dedicated Administrative Assistant with more than 15 years’ experience in the oil & gas industry; coordinating, planning and supporting daily operational and administrative function. Able to provide comprehensive support for senior and middle management. Industrial Electronics + Journeyman Licensed Technician coupled with 20+ years sales Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree. Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement. Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects. Crane/Rigging Trainer, Crane/ Lifting Equipment Inspector, Safety Advisor, Crane/ Maintenance Engineer, Rigging Supervisor, Terminal Supervisor Dynamic professional with BS in Mechanical Engineering from UCI seeking a challenging career in the oil refinery and/or power industries where technical and engineering leadership and direction are sought to execute projects from the developmental process to a finished state Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications. Dual Post Graduate Mechanical Engineer with 10 years of experience Experienced Offshore Plater - Coded Welder. Norwegian Survival Certificate, European Survival Certificate, Mexican Work Visa Mechanical Engineer with 4+ years of experince in construction of power and oil & gas sector Perform other work as required. Excellent team worker, function well under pressure, highly motivated toward goal achievement, self motivated, eager to learn, honest and hardworking. If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services. Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production. Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance. I would like to express my interest in an entry level position in your Company. I completed M.Sc in Applied Geology from Jadavpur University in 2006 and now I completed my M.Tech in Mineral Exploration from Indian School of Mines University, Dhanbad and obtained first rank in M.Tech Mineral Exp GIS, Geophysical Data Processing, Mapping, Airbone Surveying Have 12years of experience in foods, cleaning, warehouse etc. Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering. I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate. I have a University Degree in transport engineering. I’ve 3 years experience as cadet and OS. This year I’ll finish professional course and acquire navigator diploma. As beginner in offshore industry I’m ready to start at the bottom and begin my career on an oil rigs from entry–level positions. Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development QC Mechanical, API 570, API 653, CWI & NACE coatings inspector Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc.. I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects. Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member, Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa. maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas. Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems Control room and plant operator, 10 + 2 +3 yrs of education, adequate computer knowledge, reciprocating,centrifugal pumps and compressors, handling DCS systems, experience-2yr 3 months in Oman, 1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   [ 22 ]   23   24   25   26   27   28   29   30   Seach Parameters Change search parameters... CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com