Resume - More than 14 years of actual and hands-on work experience in Electrical, Instrum...

Misco Jobs

Resume #85753

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS & TRAINING

Certificate IV in Explosion-Protection (UTE 4 07 99) – Australia, in following main units….
-UTE NES 010A (Report on integrity explosion protected equipment in Haz Areas)
-UTE NES 409A (Inspection visually existing Haz Area Installation)
-UTE NES 410A (Inspection in detail Haz Area Installation)

Diploma in Electrical Engineering

Electrical Supervisor Certificate – Licensing Board Gujarat State, India

Certificate in "BOSIET" including Safety Induction, Helicopter safety and escape, Sea Survival, Elementary Fist Aid, Fire fighting and self rescue – OPITO Approved.
(Expiry date 07.03.2010)

Certificate course in Computer Science.

TASK EXPERIENCE & WORK DESCRIPTION

Hazardous Area Inspection experience in brief:

* Monitor and check all E&I installations to ensure that the facility meets all hazardous area certification requirements.
* Perform inspection surveillance at fabrication and installation to ensure that the contractor carries out the fabrication and assembly work in accordance with contract specifications, approved drawings, test procedures and the defined hazardous area requirements.
* Ensure that all certified equipment is inspected/accepted by demonstrable competent persons (e.g. Comp 'Ex' certified personnel) in accordance with requirement of codes and the equipment's certification and installation instruction. Special X certification requirement shall be subject to formal document evidence.
* Compile Hazardous Area Verification Dossiers (HAVD).

Electrical and Instrumentation Quality Inspection in brief:

* Assist QA/QC Superior in execution of project work
* Provide communication interface between Contractor's QA/QC department and construction
* Prepare of surveillance, inspection report and submits to construction for action
* Review and comment on Contractor's Quality Plan, Site Quality Organization, Contractor's Method Statements, QC Procedures, ITP, ITR etc.
* Responsible for reporting to QA/QC Manager any deviations and non-compliance from company specification discovered during inspection
* Carry out inspection activities of all Electrical & Instrumentation (E & I) construction work in the project ensuring that it is carried out in accordance with AFC drawings, specifications, Class Rules, Regulations and the approved project ITP
* Ensure proper custody transfer of Company supplied equipment and Contractor supplied Equipment to the yard warehouse and that they are received, identified, handled, preserved and cared for before and after installation.
* Works include material inspection, verification and acceptance.
* Ensure the E & I work is completed in compliance with project safety policies and procedures. Ensure PPE requirements are strictly enforced.
* Prepare punch list relative to the inspection, giving full description of non conforming item or condition, and re-inspect after rectification is completed.
* Develops and coordinates Site E&I Audit Schedule and conducts site E&I audits.
* Ensure contractor is performing quality reporting as per the contract.
* Inspection of Cable Trays, Conduits, Instruments stands, Junction Box, Marshalling Cabinets, Pneumatic Tubing, Impulse Lines and Pneumatic Air System.
* Inspection of termination for Fields Instruments, Junction Boxes, and marshaling Panels.
* Witness of instruments workshop bench testing/calibration and functional check of shutdown and control valves prior to installation & testing of Tubing and Instrument.
* Witness electrical continuity and insulation resistance test, performed by the E & I test crews, and witness instrument calibrations, pop test of PSV, Power Distribution System, Control and Monitoring system, Navigation and Communication system. Cable Handling system and System Interfaces with D.P system
* Witness and Inspection of F&G, PAGA, Telecommunication, FM-200 System, CO2 System & HVAC System
* Perform any related inspections that may be needed from time to time.
* Verify/sign construction check sheet.
* To provide technical guidance to the Contractor and Sub-contractor execution teams
* Walk through and Punch Listing, verification and close-out of punch list prior to sail away of the facility
* Ensure the production of the acceptance of the necessary documentation for inclusion in the final package
* Review of final QC dossiers
* Support the Company's safety goals for the project.

Filed Construction experience in brief:

* To review engineering drawings, data sheets, technical requisition and specifications. Confirm engineering contractor's is compliance to the company's requirements on electrical and instrumentation system, including telecommunication and fire & gas system
* Monitoring and review of Contractor and sub-contractor(s)/sub-supplier(s) Work Scope and standards, and field detailed design drawings and documents.
* To perform technical bid evaluation (TBE) and support procurement team in technical clarifications to the vendor
* Review detail engineering before issued for construction (IFC/AFC drawings)
* Check and review the red marked up drawing onshore/offshore AS BUILT
* Provide weekly progress report regarding Instrumentation and Electrical discipline activity.
* Monitor change, ensuring that all scope changes are quickly and properly documented, and that change orders were approved prior to the performance of work.
* To establish and maintain a good working relationship with the various contractors and their respective personnel
* Liaising with Pre-commissioning / Commissioning teams on Project Completion priorities and activities.
* To co-ordinate with owner representatives, prepare progress report and technical reports

Mechanical Completion, Pre-Commissioning and commissioning experience in brief:

* Ensure Contractors MC activities are performed in accordance with the Mechanical Completion Manual.
* Ensure contractor completes the correct Mechanical Completion Check Records (MCCR's) as detailed in the Responsibility Matrix appended to the MC Specification ensuring the inspection, witness, hold & approval points are adhered to.
* Monitor the completion progress of each pre-defined MC Package in PIMS-CMS & issue the Status Index to Contractor, Construction & Commissioning when all MCCR's are complete.
* Co-ordinate daily meeting with the discipline Construction Engineers leading up to the Multi-discipline Punch-out.
* Issue notification of the MDP to all parties as detailed in the CP Handover Procedure.
* Compile the MDP package & lead the MDP consolidating the outstanding open punch lists carried over from the MC discipline punch list with the new punch list items found at the MDP stage.
* Additionally ensure that Carryover Work Lists and Material Status Reports are added to the MDPL.
* Agree the categorisation of identified punch list by printing a master copy of the punch list & submitting to all parties for approval & signature.
* Monitor the ongoing closure of punch lists, closing out in PIMS-CMS when signed off as being cleared by all parties.
* When all category 'A' punch list items are clear, agree with Commissioning an acceptable amount of outstanding category 'B' punch list items & issue the Handover Dossier as detailed in the CP Handover Procedure.
* Identify the System/Sub-system and description, preparation of marked up P&ID, Electrical One Line Diagram subsystem breakdown for onshore and offshore pre-com and commissioning scope of work, pre-com and commissioning task sheets (jobcards) on database which includes the job to be done, man hour estimates and material requirements. Prepare Workpacks required for the job execution in onshore/offshore installation/hook up, pre-com test and commissioning of newly installed and/or existing Oil and Gas Platform
* Perform power up, functional test, commissioning and initial start up of the LV Switchgears, MCC's, UPS, Chargers, DCS, PLC, System Cabinets, skid utilities and process machinery equipment. Perform calibration, loop check and functional test of F&G, Process Alarm and Shutdown Systems.
* Verify/sign Pre-Commissioning and Commissioning check sheet.
* Check and review the red marked up drawing onshore/offshore AS BUILT and project mechanical completion milestone documents Understanding of review the related E&I drawing and selection material as required.
* Responsible for the system, sub system commissioning and facilities handover to Client acceptance.

WORK HISTORY

DURATION COMPANY JOB TITLE WORK DESCRIPTION
July 2008 –
To Date Scorpion Offshore Ltd, Huston, USA Site Representative
(Electrical & Instrumentation) Working for the Fabrication of 2 Offshore Rigs at Lamprell Fabrication Yard –Hamriyah Free Zone, Ajman, UAE
November 2006 –
March 2008
Clough Projects International Pty Ltd, Australia
(Brunel Energy, Malaysia) Snr. QA-QC Inspector / Field Engineer
(Electrical & Instrumentation) Worked for the Fabrication of Marri WHP for OMV - New Zealand at Kanccana Fabrication Yard – Lumut- Malaysia. Working on this Project I was employed in the capacity of Snr. E&I Inspector and further supported role of Field Engineer.
April 2006 –
September 2006

Clough Projects International Pty Ltd, Australia
(Brunel Energy, UAE) Snr. QA-QC Inspector / Field Engineer
(Electrical & Instrumentation) Worked for their Installation of 03 Topsides Platforms namely PH, PJ, and STD for BG-India Ltd. at Mumbai Offshore (Tapti field and Panna Field) India.
December 2005 –
April 2006

Clough Projects International Pty Ltd, Australia
(Brunel Energy, UAE) Snr. QA-QC Inspector
(Electrical & Instrumentation) Worked for their Fabrication of 03 Topsides Platforms namely PH, PJ, and STD for BG-India Ltd. at Lamprell Energy Fabrication Yard- Jebel-Ali –UAE
August 1999 –
December 2005
SIMCO Engineers, India
QC Inspector
(Electrical & Instrumentation) * Worked for construction of IPCL Petrochemical Project, Dahej, India
* Worked for Western India Ship repair Company, GOA, India for Jack up Drilling Rig- JUR SAGAR JYOTI of ONGC
September 1998 –
August 1999
Najem-A-Aba Hussain, Riyadh, KSA QC Inspector
(Electrical & Instrumentation) Seconded to S.ARAMCO for their project inspection activities at Riyadh Refinery expansion project
July 1994 –
August 1998
Videocon Narmada International Ltd, India QC Inspector
(Electrical & Instrumentation) Worked for up gradation of 11 KV Switchyard and LV distribution system for VNEL Company, Bharuch, India
September 1992 –
June 1994 Western Electric Corporation, India Jr. Engineer
(Electrical & Instrumentation) Worked for modifications of existing switchgear unit at GNFC Site, Bharuch, India

PERSONAL BIO
Date & Place of Birth: 14 January 1971 – Bharuch, India.
Citizenship: Indian
Marital status: Married, 2 children
Driving License: India

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1469)

Go to Search Parameters...

Brief Description

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Geologist, 17 years experience with major Oil Company in various international settings (Europe, Asia, Middle East and Africa) both as development- and exploration geologist. Analytical and flexible. Swiss national.

I have been doing Sandblasting/Painting for 18 yrs. Over the years I have become more and more skilled. I have used just about every industrial paint there is (for example) zinc, red oxides, high builds, 890, urithane, epoxies, and etc.... I have knowledge with airless

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using Monte Carlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

TIG, MIG SMAW, duel shield, drawing, ASTM, ASME codes, MIL 256-7, copper-nickel, plasma cutting

Six years in a medical lab an nine years in a petrochemical lab

Qualified Diesel Mechanic

I am an Independent Landman looking for employment in the Oil & Gas Industry. I have approximately 10 years experience in Mineral Title Search and negotiating leases, Due Diligence and Curative of Title among other aspects of this business.

Sr. Petroleum Geologist, 27 years experience, production & exploration expertise.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Graduate Chemical engineer with experience in process control and instrumentation in Petroleum, Nuclear and Power industries. Worked on DMC and SPC advanced control strategies. Computer software skills.

Oil and Gas driller, previous owner of water well drilling company

Electrical technician, Industrial Technician, Instrument Technician, HIgh Voltage Terminator & splicer

painting and insulation supervisor/manager

I have about 15 yesr exsperience in the gas industry and 5 years in the oil field industry.I am currently a oil field gas inspector, and I also was a gas inspector for Public Safety New Brunswick

Diploma in Mechanical Engineering. With 1st class Technical

Positions desired: Plant Services Supervisor, Platform Deck Foreman, Mechanical Supervisor

More than 14 years of actual and hands-on work experience in Electrical, Instrumentation and Control Systems in Petrochemical Plant and Oil & Gas Industries (offshore & onshore) in the field of Inspection, Field Engineering, Construction and Offshore Hook-Up & Commissioning.

Directional Driller II

QA/QC nspector i reviewed and documented all x-rays NDT/NDE inspection UT, PT, VT, M.U.T., all calibration witness all production and documented any repaires and recived all information to reopt for the customer and company every day.

Laboratory Chemist, BSc Honours Degree Chemistry,

Project Management and Processes; PRINCE2 Methodology and Processes; Microsoft Project; Microsoft SharePoint Technologies; Design and Architecture; Migration Projects (2003 to 2007); Branding and Customization (Masterpage); Site and Lists Definitions

Have worked and travelled all over the Pacific region, NZ and Australia. I have interacted and worked with a wide diversity of cultures. I am a very hard worker, I learn new skills quickly and am able to implement them accordingly. I wish to continue utilizing my skills as a Diesel Fitter,

CNC machinist, edm die sinker, wirecut operator

Canadian ticketed machinist and millwrite

Welder or tube welder . blue print . machine operator.. etc..

Offshore mechanic work any shift hyd.and some elect.

TOTAL EXPERIENCE MAIN DISCIPLINE : Above 10 Years of professional experience in Piping (Including overseas).On PDMS 7 Years. EDUCATIONAL BACKROUND 1997-1998 : Diploma in Mechanical Engineering. 1993-1994 : Secondary School Certificate. CERTIFICATES 1997-1998 : Diploma in CADD Graphics. (Autodesk CA

I have more than 9 year experience in Installations,Commissioning ,maintenance, trouble shooting of all Cathodic Protection Systems in Offshore-Onshore , Pipe Line ,Oil and Gas Industries, Refineries, Petrochemical Plants,MarineJettys. And excelent Experience in DCVG (2200Km),CIP(1600Km) Surveys .

Free! I am a management professional with 28+ years of extensive experience in the O & G industry. I’ve supervised under balance drilling operations, directional drilling and vertical well applications. I’m well versed with latest drilling techniques, parameters, policies and procedures.

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Supervisor with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills, can drive change and motivate individuals to enhance company performa

My skills include, but are not limited to diesel engine rebuilding,hydraulic equipment repair and modification, troubleshooting and repair. Drilling equipment, cranes, forklifts and are some I have experience with. Mechanical equipment includes Cat engines, Drawworks, Mud Pumps, TDS9S, TDS11S.

Hardworking and dependable mechanic

I have 13 years experience in the oil and gas industry in Alberta, Canada, drilling natural gas with Champion Drilling. For the past 6 years I have been a driller, supervising a 5 man rig crew. I am loyal and extremely hardworking.

Senoir Fabrication Supervisor for piping on Operation Department from Gulf Specialized Mechanical & Engineering Service Co. L.L.C.For this moment of my job I am started work to checked iso.drawings on conformity with P&ID and notify all descrepancy and inform Field Eng.Department

Maintain a safe workplace. Effectively resolve problems. Expedite the achievement of company projects (procedures & specifications). Ability to think critically as situations develop & change. H2S/HUET/firefighting offshore/certified crane licenses. CPR. Current passport

I have EIGHT (08) YEARS EXPERIENCE: In oil/gas Drilling Company (ENTP), and DALMA ENERGY Algeria as Rig Chief Electrician, in Algeria Field.

* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.

International Logistics Business Executive - Trilingual

Wellsite supervisor for 5+ years with 10+ years prior service rig experience

crane inspector, technician, project manager, special projects coordinator

To apply my skills and training as a Heavy Duty Mechanic. I am a forth period apprentice and have experience with the repair and servicing of hydraulics, gaseous compression systems. And fluid pumping systems, coil tubing units, diesel engine repairs, and tractor/trailer repairs.

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

Planner/Coordinator

Seismic Interpreter(M.Sc. Degree) with extensive experience in exploration with carbonates and basalts. Involved in planning 2D/3D surveys, wells, mapping seismic data, integrating different data sets to derive a sound geological model and technical evaluation of new acreages for bidding.

Title research, Mineral Ownership reports, Limited title abstracting, Lease negotiation, Run sheet, Pre-lease clearance, Draft clearance, Due diligence, Land damage negotiation and settlement, Extensive curative documentation preparation

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out