Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #85771 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE
[Type Objective Here
Mig & Stick Welding, Blueprint Reader, Crane & Hoist Operator, Fork Truck Operator, First Responder In First Aid, OSHA Certified Confined Space, Standard First Aid For Layne Christensen Company, OSHA Construction Safety, Health And Respiratory Clearance Certification And Labor When Needed

SUMMARY OF QUALIFICATIONS
3/2001 Brunner Eng Bedford, Ind Certified First Responder Course 2/2000 Brunner Eng Bedford, Ind Certified OSHA Confined Space 4/1999 Brunner Eng Bedford, Ind Certified Fork Truck Training 12/2002 Brunner Eng Bedford, Ind Blood borne Pathogens In Industry Training Course 12/2008 Ranney Collector Wells Columbus, Oh American Red Cross Standard First Aid 6/2008 Ranney Collector Wells Columbus, Ho OSHA Construction Safety & Health 10/2008 Ranney Collector Wells Columbus, Ho National Center For Construction And Research 12/2008 Ranney Collector Wells Columbus, Oh Medical Enterprises, INC Respiratory Clearance Certification Complies With OSHA REG 1910.134 10/2008 Ranney Collector Wells Columbus, Oh Metro Indianapolis Coalition Construction Safety

WORK OF EXPERIENCE
07/1987 To 05/2003 Brunner Eng Bedford, Ind
Welder, Labor, Janitor, Fork Truck Driver And Painter Plan And Perform All Operations To Layout, Assemble And Weld Full Range of Air, Oil Separator And LP Tanks, Use Jigs, Fixtures, Engineering Drawings, And Route Sheets, Perform Broad Range Of GMAW, SMAW, GTAW, And SAW Welding, Operate Oxy Fuel, ACC And Plasma Arc Cutting, Program And Run Automatic GTAW Welder, Weld Various Ferrous And Non-Ferrous Metals, Follow Welding Procedures to Select the Correct Filler Metals, Set Amperage, Voltage, Travel Requirements, Detect & Report Fault Operations, Defective Material, Or Questionable Drawing Requirements, Maintain Neat & Orderly Work Area, Operate Fork Truck to Transport Material, Operate Crane & Hoist, Always Follow All Prescribed Safety Rules & Regulations. 05/2003 To 03/2008 Toyota Industrial Equipment Columbus, In Mig Welding, Performed All Weld Measurement According To Blueprints, Repaired Fork Trucks When Needed, Operative Hand Tools, Operative Upright Milling Machine, Operative Fork Truck, Joined Toyota Improvement Group Won Two Award For Best Improvements 03/2008 To Presets Reynolds Inc Complete Industrial & Musical Water System Orleans, Ind Labor, Welder, Concrete Work, Operative Back Hoe, Operative Hand Tools, Sink Casson 80 To 130 Feet In Ground, Build Water Treatment Plants For City water Or Power Plants, Travel A lot, Always In Lots Of Training for safety, Always Watching Employee For There Safety And Better Ways Of Doing Thing Better, Good Team Player

EDUCATION

08/1980 To 05/ 1984 Bedford North Lawrence High School Bedford, Ind Graduation May 1984 08/1982 Bedford North Lawrence Vocational School Bedford, Ind Complete Stick & Mig Welding Blueprint Reading 06/2000 Bedford North Lawrence Vocational School Bedford, Ind Complete Advance Blueprint Reading ` 09/2001 Bedford North Lawrence Vocational School Bedford, Ind Teach Employee Stick & Mig Welding
------------

View contact information...
«« previous resume next resume »»
Search Results (Resumes 501 to 550 of 1431)Go to Search Parameters...
Brief Description
I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.
Project Management and Drafting Skills PFDs, P & IDs, General Arrangements,Isometric Drawings
Planner, scheduler, Teamwork, time manangement, lead, excellent communnication
I am working in a oil field company in abudhabi as a store keeper since 1999. I am seeking a suitable vacancy for my experiance.
I am available for immediate employment as an Assistant Driller or at a position below this.
I am young graduate engineer ready to work at any place in the world and with great interpersonal skill with the team
Certified in Heavy Duty Diesel.
Tig Welder with 13 yrs experience
5 Year in Oil & Gas Drilling & Exploration Field in Off-Shore and On-Shore.
Senior Instrumentation Supervisor / Engineering Planner with SAP R3 experience
I see myself as a highly talented Health Safety & Environmental Management professional with extensive experience ensuring compliance with the Health, Safety & Environment rules, regulations and policies & standards in the OIL & GAS SERVICE INDUSTRY in China/ Singapore with leading companies. Have i
computer operating
I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.
4 yrs Logistics work, Utility and Coating Inspection, Telecommunication installation and removal, very PC friendly,
Deepwater Completions Consultant
I have over 25 years experience in the Mechanical Engineering field; and I am also well versed in the areas of HSES (Health, Safety, Environment and Security) issues in conjunction with government and company guidelines. I have considerable experience in dealing with mechanical piping and rotating a
Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;
welding , piping, boilermaker, pipefitter, millwright / rigger
Looking for an entry level position in which I can build a career around and grow with the company.
10 years exp in electrical installation ,maintenance,pre commissioning and commissioning activities all types of systems offshore,onshore, oil & gas ,petrochemicals refinery field
I am a diesel mechanic of 11yrs experience 4yrs of these have been working offshore in the North Sea and Overseas.
Complete machinist with over 10 years experience.
Mig & Stick Welder
SENIOR PETROLEUM ENGINEER
Inspect, diagnose, and locate mechanical difficulties on buses and trucks. Replace or repair faulty parts including wheel bearings, clutches, oil seals, shock absorbers, exhaust systems, steering mechanisms, & related parts and equipment. Fabricate and assemble parts and equipment for buses.
4 yeras of pipefitting experiance as a journyman and helper
Multi skilled mechanic with experience both in the military and seismic industry.Excellent people skills and able to work well within a team or as a highly motivated individual
Oil Field
A proactive, result-oriented hands-on planner. A graduate of physics and also holds a post-graduate diploma in information and computer technology, with 12 years of post graduation experience and over 9 years of work experience in the oil and gas industry.
Stand watch and fire boilers kept logs, made reports as required.
Hands on
Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.
Qualified and certified electrician, intensive troubleshooting skills
Bore hole seismic geophysicist/ VSP processor and QC
Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.
Experienced welder
A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel
Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell
Industrial Electrician / Instrumentation Technician / Infrared Thermographer
I am presently employed as a Builders Labourer and my duties include scaffolding, and steel fixing. As a Self Employed Diver I undertook mooring installations and sea bed surveys. I have previously worked offshore as a Production Mechanic.
Solid management experience in professional Procurement (purchasing, quality control and logistics)
I have extensive experience with G.P.S. and conventional surveying methods. I’m also proficient with AutoCAD, Carlson, Trimble, Topcon, 3D Office.
Manager,Supervisor,Designer,Fabrication
I have oilwell service experience with wireline, swabbing, fishing and rental tools. I have 24 years experience with manufacturing and machine work on oilfield equipment. I am an hands on hard working man with good hand eye coordination that likes the challange of working on oilwells.
Country/Sales Manager Africa
Oil and Gas Drilling Professional
Objective: It is my objective to become a contributing member of your company and further my knowledge and become a great asset to your company. I have experience with people and different countries and Cultures and plan on furthering my knowledge and skills with your company.
Helicopter view, fast analysing, creative in finding solutions, mind setter for safety
Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer
My unique experience in the Petrochemical Industry as Pipe Designer, 3D PDMS, AutoCAD Designer 2D/3D Modeling/Rendering/Animation, Microstation V8 XM, Certified Pipe Welder, Journeyman Pipefitter, Shutdown Planner, and Crew leader, helps me be proficient towards my plans on detailing and Designing.
1   2   3   4   5   6   7   8   9   10   [ 11 ]   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2010 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com