Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86453 next resume »»
CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:

I am applying for a Rig/Heavy Duty Mechanic position. I am a very reliable and dependable individual. I take pride in my work and do it in a safe and timely manner. I have worked in many different multicultural areas both in Canada and outside of Canada where you have to be somewhat of a diplomat to get the job done. I have a very positive out look to life and I don't look at the glass as being half empty rather as half full. My various experiences in different industries bring new and diverse ideas to solving problems. I am a team player and am willing to take other peoples input and suggestions. I am also very motivated, self-starter and can for see things that should be done and not wait on till there is a problem. This comes from my on going training in preventive maintenance. I enjoy passing on my knowledge to apprentices and understudies. I feel that I can adapt to any industry and any situation that may arise.

EDUCATION:

* Grade 12 diploma
* Journeyman Heavy Duty Mechanic - Sept.17/86 Red seal inter-provincial #J-06-10035
* Journeyman Automotive Mechanic - Sept.2/82 Red seal inter-provincial #J-13-07185
* Fuel injection up-date, 30hr. L.C.C. AB - Nov.9/85 File # 09-A026066
* Hydraulic course, 80hr, Foremost, AB
* Receive award for highest marks, 3rd year Heavy Duty, L.C.C. Lethbridge, AB
* Hydraulic course, 100hr put on by Vickers/Tanco (May 2000)
* Cat 3500B, training course (May 2006)
* Canrig Top Drive course (Nov 2005)
* Valid class 1 with air, international drivers license
* Valid passport (2013)
* Have worked in Venezuela, India, UAE and Papua New Guinea
* Basic Offshore Safety Training (09CB-0605 valid till 21-07-2012)
* First Aid/CPR-C (St.John Ambulance 120460 valid till 08-16-2012)

EMPLOYMENT:

Presently:
High Arctic Energy

Red Deer, Alberta
403-310-7682(SNUB)

Duties included:
* Hydraulic Mechanic, maintenance and overhaul.
* Assist rig mechanic when needed.
* Hydra-static, rack & pinion Draw-works (EDM)
* Hydraulic top drive (TB Woods)
* All other hydraulic units. Iron Roughneck (NOV), Hydraulic catwalk
* Cyber Chair controls (Sence)

Started: Oct. 30/08 to Still employed

Precision Drilling International/ Weatherford International

Houston, Texas
713-693-4216

Duties included:
* Rig Manager for one week after the rig manager was asked to leave (April6/06 to April 13/06).
* Working in Venezuela, 28 days on and 28 days off, camp job.
* Maintenance and overhaul of all equipment on Top Drive Electric (1500 HP)
* Types of equipment on drilling rig are: 3512 Cat engines, Canrig Top Drive 275 ton, Emsco F1000 Mud Pumps, Continental Emsco Drawworks, IT28 Cat Loader, Brandt Shale Shakers, Halco 1180, 2500 Pumps and other miscellaneous equipment.
* This is a pad operation where 14 to 20 holes are being drilled. The rig is self-contained and is able to skid from hole to hole on mat rollers.
* The holes are all horizontal and directional drilling is used.
* PM program is used and I look after the program both on the computer and hard copy in a filling system. This is all reported to the mechanical supervisor in the main office. I am familiar with Excel and Word programs.

Started: Dec. 2003 to Oct 30/08

CEMENTATION/SKANSKA /AURORA QUARRYING

Flin Flon, MB
204-687-3969/204-687-2350

Duties included:
* Maintenance and overhaul of underground equipment
* All underground work
* Experience with Tamrock jumbo, Wagner scoops, 35& 40 ton trucks, scissor-lifts
* Rebuild jacklegs, stoopers & welden & sandpiper pumps
* Maintenance and overhaul Toyotas
* Preventive Maintenance system was in use.

Started: March, 2002 to Dec. 2003

MILLENNIUM MECHANICAL

Bissett, MB
204-277-5535/866-269-1248

Duties included:
* Maintenance and overhaul of underground equipment
* All underground work
* Subcontracting to Aurora, HBMS, Mussel White Mines and MacIntyer Mining

Started: Oct/2001 to March/2002

HARMONY GOLD

Bissett, MB
204-277-5552 (Ian Kasperski)

Duties included:
* Maintenance and overhaul of mining equipment
* All underground work
* Experience on Tamrock jumbo, Tamrock scoops and J.C. rock trucks lifts and other equipment
* Worked on mine shut down and removal of underground equipment

Started: March/2001 to Sept/2001

SELF EMPLOYED (Riverland Repair)

Subcontracting to First Nations:
Garden Hill, Red Sucker Lake, Oxford House

Duties included:
* Maintenance and overhaul of equipment; D6 Cats, graders, tandem trucks, water and sewage trucks, track hoes, wheel backhoes, cars and trucks
* Foreman on the construction and maintenance of the winter road

Started: April 92 to March 01

TANTALUM MINING
Lac du Bonnet, MB
204-884-2400

Duties included:
* Maintenance and overhaul of mining equipment, Emco scoops, 20 ton truck, Atlas Copco Jumbo, Tamrock air jumbo, track giraffe and other related equipment

Started: April/89 toApril/92

CRUSH RITE CONSTRUCTION
Esterhazy, SK

Duties included:
* Maintenance and overhaul of all equipment: Cat engines, 3208, 3306, 3406, 3408, Cat loaders, Ford 9000 & 8000 trucks, gravel crushing and concrete equipment, also other related equipment
* Supervision of truck drivers
* Operate loaders and trucks when needed

Started: Aug/86 to March/89

GOLDEN PRAIRIE FARMS
Wrentham, AB

Duties included:
* Maintenance and overhaul of farm equipment; John Deere 4 wheel drive tractors, harvest and seeding equipment
* Supervision of 7 to 9 men
* Operate farm equipment when needed

Started: Nov/83 to Aug/86

DOT-LYNN SALES/L.B.R.CONTRACTORS
Grimshaw, AB
403-332-4230

Duties included:
* Operate and maintenance of seismic equipment; Gardner Denver drills, Foremost flex track swamp buggies, GM tandem trucks
* Repair of all makes and models of cars and trucks
* General welding and fabrication welding

Started: Nov/76 to Oct/83

PERSONAL:

* Excellent health
* Into all sports, camping, fishing, hobby farming, traveling
* Good at gas, arc and Mig welding
* None smoker
* Very good with hydraulic systems
* Good welding skills, both cutting and arc welding
* Preformed major overhauls on engines, transmissions, hydraulic systems, top drives, gear boxes
* Good knowledge of computers, excel, word, and outlook.
* Excellent with PM systems both with hard copy and computers.

REFERENCES
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 151 to 200 of 1485)Go to Search Parameters...
Brief Description
Installation of electrical and instrument equipment, commissioning and pre start up, layout plc panel and install plc parts, wiring of motor controls in mcc, and construction works.
Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities.
Computer and management skills, mechanic supervisor, diesel performence and diagnosis, inventory quality and control, have worked in middle east and Africa.
Storeman, Expediter, Roustabout, Clerk
Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.
Pipe Welder+Metal Fabricator+Iron Worker
I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho
Boilermaker for 15 years petro and power
Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.
19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.
High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.
With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.
Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor
I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more
I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.
Driller/Directional Driller experience, looking for either, and will travel anywhere.
Senior Directional Driller Offshore/Land Domestic International 25+years
I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work
Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.
I am a Chemical Engineer by qualification. In my professional career spanning over nineteen years, I have worked in the Marketing function of leading players in the petrochemical industry in India, with regional responsibilities spanning across Asia, Western Europe and Africa.
Electrical Technician Electrical instructor
Applying Insulation and Sheet metal Cladding.
1st class welder fitter i have six full years expierience in this field
Welder ****16 Years Experience***
Journeyman Electronics Technician,Seismic,Telecommunications,Copper Cable Splicing
Skills are; mechanic, HVAC, heavy equipment etc.
Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.
Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.
Sheet Metal /Insulation Supervisor
I HAVE 11 YEARS EXPERIECE AS MOTERMAN ,I AM HOLDING PANAMA THIRD ENGINEER UNLIMITED C.O.C
Millwright/Safety
i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.
10 plus years as an inspector
DIPLOMA IN MECHANICAL ENGINEERING
Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants
Oil field experience in a variety of areas, Supervising drill crews.
I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.
I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.
Professional Experience Mainly related to Industrial and Oil Jobs
Extensive experience in the Electric Sumbersible Pump Industry
15 years experience in the Machinist trade on both CNC and manual machine tools.
Nace 1 Coatings Inspector
Experianced offshore rigger and AB seaman, 200t captain, With US work visa, DSV, AHTS, Supply vessels, jackup barges
Petroleum Landman
To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics
1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.
Heavy Equipment Operator
Senior Civil / Structural Designer
I have had both mechanical and condition monitoring experiences which will make me a very competitive candidate to fulfill condition monitoring and/or mechanical position. I have had ISO Cat-II vibration analyst for condition monitoring.
Journeyman Heavy Duty Technician
1   2   3   [ 4 ]   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com