Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #86536
next resume »»
CONTACT INFORMATION:
ACHIEVEMENT
* Engineering, cost and administrative responsibility for Engineering staffs and support personnel.
* Developed, maintained, updated, and enforced policies and procedures including the following: Injury and Illness Prevention Program (IIPP), Emergency Action Plan, blood borne pathogen procedures, personal protective equipment procedures, and Safety Contingency Plans. Revised policies and procedures to minimize potential hazards.
* Initiated and/or implemented various cost reduction programs resulting in over #2000, 000 savings in reduced labor and material costs.
* Supervised, Managed and coordinated all field engineering functions and facilities..
* Served as technical advisor and instructor of formal training to and technicians and other artisans/craftsmen.
* Familiarity supervising and coordinating multi-million dollar outsourced projects.
* Knowledge of GE gas turbine technology-Turbines of different frames used for power generation and in the oil and gas industry.
* Strong Leadership and management skills such as delegation, negotiation, time management and team building gained in entrepreneurial training as well as other courses attended
SKILLS/CERTIFICATIONS
Leading Your Team Team Building Entrepreneurial leadership
MS Office 97/2000/2003/XP Safety
EXPERIENCE
7/08-3/09 Granite Service International Incorporated Lagos, Nigeria
Technical Advisor
Field Engineer (Mechanical))
* Used company's remote server and e-tools-DART, COPICS, PAC, Metaphase, FRMT, Power finder, e BOM, METHODS among others-to retrieve technical documents, drawings, and bill of materials, to proffer complex design and maintenance solutions for customers.
* Scheduled maintenance jobs for gas turbines of different frames to subordinates.
* Enforced compliance to company's EHS policies and procedures.
* Coordinated; supervised different inspections-Hot Gas Path, Combustion Inspection and Major Inspection- on Gas turbines.
* Liaised/interfaced with customers to ensure that appropriate spares are stocked for prompt maintenance jobs and upgrades on existing equipment were carried out promptly. Also provided technical assistance to complete the work scope according to contractual requirements.
* Maintained knowledge of applicable product line warranties, and accomplish effective warranty administration, such as writing technical reports, ordering materials, securing quotations, preparing job status reports using FSRauto, reports to customers on a complete timely, and thorough basis
6/07-6/08 Taise Enterprises Nigeria Warri, Nigeria
Maintenance Supervisor
* Managed,supervised maintenance staff by determining workloads and schedules; develops, interprets and implements policies and procedures. And ensures that staffs are trained in complex maintenance activities and are following standard operating procedures.
* Monitored and participated in operations in assigned sections including inspecting jobs, developing and implementing modifications and improvements, recommending specifications and scheduling for contracts, negotiating prices and inspecting contractor's work to ensure that safe work practices and standard operating procedures are followed.
* Answered questions and provides information related to projects including resolving problems, approving expenditures, handling complaints and providing technical expertise in area of assignment.
* Provided input into the development of the operating budget for the assigned area of responsibility; orders materials and supplies; assists in the monitoring and tracking of expenditures for the section.
* Coordinated section activities with other sections, programs and departments, including scheduling and resolving problems; coordinates and inspects work performed by team members.
* Assisted in the selection of staffs; performed periodic evaluations of subordinates and recommended and implemented discipline as required.
* Ensured that safety training is provided to staff and that proper safety practices are followed.
* Responded to emergencies as requested; coordinated activities with other responders; directs the work of staff and utilization of resources to effect repair and ensure the safety of the community.
9/05-5/07 Michelin Nigeria Limited Port Harcourt, Nigeria
Engineering Trainee/Spares Controller
Garnered vast experiences in the designing of pneumatic circuits.
Utilized skills on the designing and construction of hydraulic circuits.
Developed electrical schemas with contactors, relays, timers. Also executed projects based on approved designs.
Acquired skills in reading engineering drawings and assembled machines from the drawings.
Ensured that quality spares are available and on time for the company. That involved getting materials and fitting specifications. Planning and monitoring the items so that they are not over stocked, codification of items of spares; modifications. Raising needs, purchase orders- local and foreign. Verification of items as they come. Handling goods returned; deletion of items not in use. Needs follow-up while liaising with the customers on technical matters. It involved my organizing and coordinating periodic inventories.
8/03-7/05 Taise Enterprises Nigeria Warri, Nigeria.
Service Technician
* Prepared maintenance schedules for equipments.
* Executed routine maintenance jobs and overhauled machines-diesel engines, compressors and generators.
* Liaised with customers to carry out safety audit on equipment.
* Managed budget allocation for my area of work.
* Investigated, identified and evaluated problems with a view to proffering viable engineering solutions to meet client needs
* Carried out civil works for the mounting of equipment to be installed.
* Trained Operators as to the use of Machines and carried out minor running maintenance on the machines
12/02-7/03 Chevron Nigeria Ltd, Sub Linkso Nigeria Escravos, Nigeria
MECHANICAL TECHNICIAN
* Carried out repairs on sandpipers, compressors, centrifugal pumps-volute and diffuser types, Reciprocating pumps-gear, lobe, vane, valves of various kinds and sizes as well as other rotating equipment, generators, hydro test pumps, actuators on different offshore and swamp locations of the company.
* Executed routine servicing and preventive maintenance on machines around the tank farm.
* Liaised with customers to ensure the safety and efficiency of equipment.
* Installed and commissioned welding Plants worth more than 50 million naira at Escravos.
* Ensured that works in my purview were carried out according to approved program of work.
* Executed maintenance jobs in the Escravos tank farm, various platforms, jackets, flow-stations, as well as swamp location such as Meren 1,Meren 2,Meren WIP, Okan, Parabe, makaraba, Abiteye, Otunana, Opuekeba, Dibi, Olero, Opolo, BOP, Delta in the North and South Field of Chevron work location
EDUCATION
IMT Enugu, Nigeria
Higher National Diploma, Mechanical Engineering 8/97
IMT Enugu, Nigeria
National Diploma, Mechanical Engineering 7/94
LANGUAGE
English
TRAINING
7/08-11/08 Direct Hire Gas Turbine Training for Experienced Field Engineers.
GE Power Systems University Schenectady, New York USA
Developed a solid foundation in Power Generation Technology by gaining first-hand knowledge of various turbines and turbine components; Basic Engineering Technology (BET), Company policies and practices, Acquired strong Knowledge of Environment, Health and Safety (EHS) consisting Site Safety, Personal Protective Protection (PPE), Defensive driving, Hand and Power Tool safety, Asbestos Awareness, Welding and cutting, Fire safety, Confined Space, Hazcom, Electrical safety/Lock-out and Tag-out. Use of on-line Database resources, Power Plant fundamentals, Piping and Instrumentation Diagrams (P&IDs) Reading, Basic control, Intensive Gas Turbine Technology; Electrical Technology and Generator Technology. Customer Service Excellence, Lean six sigma, Volunteer Opportunity, Technical writing. Supervised On the job training was provided and was exposed to actual equipment including carrying out a Major Inspection.
SAFETY TRAINING For Experienced Field Engineers (GE) Schenectady, New York, USA
Accident Prevention Signs and Tags, Aerial Lift Safety, Accident Investigation, Back Safety Awareness, Compressed Gas Safety, Crisis Management and Security;Cranes,Derrick and Rigging, Emergency Preparedness and Fire Prevention, Ergonomics for field Workers, Electrical Safety Authorized, Excavation and Trenching, Fall Protection Awareness, Hazardous Chemical in the Workplace, Lead Safety Awareness, Occupational Noise Exposure Awareness, Portable Fire Extinguishers, Preventing Violence in the Workplace, Radiation Safety for Nuclear Power Plants, Respiratory Protection Awareness, Scaffolding Awareness, Travel Health, Safety and Security, Ladder Safety
Chevron Nigeria Ltd. TRAINING
Water survival: The technique for surviving in water as opposed to swimming in offshore environment was learnt and practiced. Simulation of emergency exit on a helicopter that crashed at sea was carried out. Safety procedure for the abandonment of oil facility was also learnt. The use of PFDs was demonstrated
CONTROL OF HAZARDOUS ENERGIES (Lock out, tagged out): The fundamentals of how/who and when to isolate and tag out equipment were learnt.
STOP -Safety Training Observation Program.: This is a systematic, proactive approach to ensuring safety by reducing unsafe act and unsafe conditions. The process of observation, stop, think, decide and act were covered
Construction Safety: The need to comply with Chevron HSE policies-SOP (Standard Operating Procedures) were discussed; hazards, risk analysis, Permits to work system-Hot work permit, radiological permits, excavation permits, general work permits, general safe working permits, daily safe working permits, hazard communications, helicopter safety, fire safety good housekeeping material handling SIM-OPS were learnt
Confined Space Entry/Industrial Hygiene/RPE: The needs for industrial hygiene were highlighted, the definition of confine space and steps taken before the entrance of a confined space. The uses of respiratory protective equipment were demonstrated.
OTHER TRAININGS
Michelin Nigeria ltd. Induction
Project writing skills
Environmental/Safety awareness
Entrepreneurial training
British council Leading your team
PROFFESIONAL AFFILIATION
Member
The Institution of Engineering and Technology London. (IET)
Registered Mechanical Engineering Technologist
Council for the regulation of engineering in Nigeria (COREN)
Registered Engineering Technician
Engineering Council UK (ec UK)
Part Registration, Incorporated Engineer (IEng)
Engineering Council UK
«« previous resume
next resume »»
Search Results (Resumes 701 to 750 of 1489)
Go to Search Parameters...
Brief Description
Crane specialist. Heavy duty mechanic, mobile crane operator, trade licences. Towercrane ticket, and presently apprenticing as milwright to further my skills. Operate and repair many makes models of hoisting equipment. Rigging, inspection, supervision skills + more 20yrs exp with industry leaders
Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence
Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.
14 years Experiences in welding inspection, quality assurance and quality control, NDT inspection and documentation with major middle east oil companies. Qualification: Diploma in Mechanical engg, CSWIP 3.2, BGAS Grade 2, NDT level 2 in 4 methods
Caterpiller Trained Heavy Diesel Fitter with open cut and underground Experiance on Caterpiller, Tamrock, Leiberherr equipment
I have worked as a Tour push onshore Venezuela and as a driller offshore Qatar. I am now working as a drilling consultant here in Canada.
Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.
I aim at working as a fresh-graduate chemist or a laboratory technician at an entry level in a chemical, food, pharmaceutical, oil or related companies and industries.
To find work as a Certified Journeyman Millwright, with Inter Provincial Red Seal
Offshore Field Engineer Pipeline Electrical Automation Mechanical
I have been in the oil and gas industries for 13 years doing project coordinations and managing maintenance of equipments
Free!
A young resilient Mechanical Field Engineer with the drive to undertake challenges and a Expertise in Supervising safety,mechanical maintenance,including pumps and turbines,spares and material control as well as managing projects
Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills
Automation & Control System Engineer - PLC, SCADA, DCS, RTU, Software, Industrial Networking
I am certified welder and can perform different welding procedures such as 5G, 6G SMAW.and SAW. I have more than 8 years working experience in various manufacturing and Oil and GAs companies in different country such as Saudi Arabia, China and Malaysia. My current job was in KNM Special Process Equi
CSWIP Senior Welding Inspector
Skilled welder fitter, hard working level headed man who is ready to take on any task that is thrown my way. I am a fast learner and I m easy to get along with and I get along with others as well. I think I would be an asset to your company.
State of Alaska Licenced Journeyman
Heavy Lift Manager
Skilled Senior LEVEL II RT Technician with 30 Yrs experience
2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).
Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay
Millwright, Pipefitter, Construction: I'm expressing my interest in a position with your company. Based on my skills, I am confident that I would be a great addition to your team.
Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.
Heavy Duty Mechanic
WellSite Supervisor
Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)
Electronic/ Mechanical Tech
More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.
Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.
Free!
Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.
Machinist,C.N.C. / Manual 20+yrs. experience
34 years in instrumentation industry.
Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.
Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training
Professional Contract Chef / EMR Available
Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.
I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.
Very experienced Welder, Pipe fitter, Foreman
Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager
A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con
I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.
22 years heavy equipment operator
Piping Draughtsman with 2 years experience
I am looking for full time employment in a general labourer capacity
Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.
Engineering
I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and
I have over 10 years as a driller and derrickhand
Experience in pipeline, Power Plat Installation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
[ 15 ]
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Seach Parameters
Change search parameters...
CATEGORIES:
Trades/Skilled;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com