Resume - 14 years of oil&gas,petrochmical QC and construction experience

Misco Jobs

Resume #86670

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

Seeking a challenging and responsible position in QA/QC field where my Professional skills, Creativity, Team work, Dedication, Hard work, a willingness to get the job done & Work Experience can be put forward.

PROFESSIONAL REVIEW:
Over 14 years of Quality Control, internal auditing & Construction experience in Electrical and Instrumentation field of Oil&Gas, Chemical and Petrochemical (with clients like Qatar Gas and PDO).

NATURE OF EXPERIENCE:

A-QA/QC Activities:
* Generation and Implementation of quality control procedures and ITPs in accordance with project requirements and standards.
* Material receiving inspection and documentation.
* Maintain list of calibrated measuring and monitoring devices.
* Identifying discrepancies, non conformances in advance through the daily surveillance reports, this minimized the NCR/CAR ratio.
* Control of Non-conforming products by issuing CAR and NCR's.
* Inspection of construction activities in each stage in accordance with approved Quality Control Procedures, Inspection Test Plan, and Project Specification to achieve mechanical completion.
* Attend system turn over walk down.
* Supervising sub-contractor QC.
* Daily monitoring of outstanding system ITRs through WinPcs/Foxpro and coordinating with construction.
* Co-ordination with certification group to fulfill the requirements of system/subsystem turn over.
* Assist in internal auditing and preparation for client audit.
B-Construction and commissioning activities:
* Capable to execute construction projects in all stages.
* Erection and installation of Switch gears, panels, HVAC systems, Transformers, NERs, cable trays, conduit systems, Fire Alarm systems, PAGA systems and instrument installations in accordance with the project Drawing, P&IDs etc.
* Experienced with all types of testing equipments like Primary Current Injectors, Secondary Current Injectors, Megger, Ductor, Fault locator, Communicators etc.
* Functional checks of Switch gears, MCCs, Cranes, Motor feeders, DC and AC UPS, Start up of Compressors and Instrument loop checking.
* Prepare As-Built drawings upon completion of work, Co-ordination with Vendors, Sub contractor and Client representatives.

PROFESSIONAL EXPERIENCE:

Dec 2006 to till date
Employer: Chiyoda Technip Joint Venture,
Position: Quality Control Inspector-Electrical
Project: Qatar Gas II LNG onshore project
Client: Qatar Gas

Duties and Responsibilities:
Daily inspection of construction activities as per ITP and site requirements, Daily surveillance reports, Supervising sub-contractor QC force, coordinating with Construction, sub-contractor and Client Inspectors.
Inspection of installations like transformers, switchgears, panels and NERs in substation, Process related motors, heaters, heat tracing panels, cranes etc in field, Power and control cable installation. Witnessing of OTDR test for Fiber Optic Cables. Inspection of Installation including Hi-pot test of MV&HVcables, 66(GIS System), 33(GIS system) and 6.6 KV switchgears. Torquing, ducter and IR test of MV and LV switch gears. Witnessing transformer vector group and ratio testing, dielectric strength of transformer oil, Primary injection of CTs, secondary injection and relay testing. Inspection of lighting system in Buildings and field. Witnessing testing of Variable Frequency Drives (VFD) and VSCF.
Witnessing installation and functional checks of Switch gears, transformers, Cranes, Compressors and Motor feeders, solo run of the LV and MV motors. Witnessing Battery charging and discharging, Function checks of DC and AC UPS.
Inspection of HVAC systems.
Inspection of PAGA, Fire Alarm, PABX and Telephone systems.
Inspection of installation of field transmitters, instruments and skids. Witnessing field and shop calibration of control valves, Temperature, Pressure and Flow transmitters, Pressure/pop testing of PRVs, Instrument cable testing and termination.

June 2006-Dec 2006 / KAUTHER-OMAN

Employer: Galfar Engineering & Contracting LLC
Position: Quality Control Inspector (E & I).
Project: Kauther Associate Facilities
Client: PDO

Duties and Responsibilities:
Preparation of QCP and ITP accordance with project specification and agreed standards. Witnessing installation of switch gears, panels and equipments in 132kv substation. Witness testing of protection relays, ducter test of bus bar joints, Witness testing of cables including Hi-pot test, Identifying and preparing punch list. Witnessing of Transformer vector group, ratio testing. Inspection of cable trays and conduit works. Inspection of Fire alarm system. Surveillance and identify discrepancies in advance and inform construction group. Identifying and reporting non-conformances. Assisting QA/QC Engineer for Internal/client audit preparations. Preparation of final handover documents as required.

Sep 2005-June 2006 / NIZWA-OMAN

Employer: Galfar Engineering & Contracting LLC
Position: Quality Control Inspector (E & I).
Project: PDO & MHEW 132 KV OHL Project (EPC)
Client: PDO

Duties and Responsibilities:
Material receiving Inspection. Inspection of installation of various equipments in substation and OHL. Witness testing of protection relays. Ducter test of bus bar joints. Witness testing of cables including Hi-pot test. Transmission tower installation inspections. Inspection of Transformer installation and testing. Surveillance and identify discrepancies in advance and inform construction group. Preparation of documents as required.

Feb 2004-June 2005 / SUR-OMAN

Employer: Consolidated Contractors International Company.
Position: QC Inspector -E&I.
Project: Oman-India Fertilizer Project
Client: OMIFCO
Contractor: Technip / Snamprogetti JV

Duties and Responsibilities:
Inspection of installation of various equipments in substations and field. Witnessing testing of protection relays, Pre-commissioning checks of various electrical equipments, 11KV, 6.6KV and LV switch gears, overhead cranes, conveyors and ship loaders. Witnessing testing of cables including Hi-pot test, Functional tests of Motor feeders, Overhead cranes and instrumentation loop checks. Surveillance and Documentation.

Oct 1998-Oct 2003 SULTANATE OF OMAN

Employer: Galfar Engineering & Cont LLC
Position: Electrical Supervisor
Contract: Maintenance of HV & LV equipment-
Client: PDO

Duties and Responsibilities:
Maintenance for petroleum development Oman power system infrastructure assets, Live line and switchyard washing up to 132kV System, All kinds of Over head line maintenance from 33 to 132kV system of PDO power system infrastructure, Partial discharge testing on all HV switchgears & outdoor HV termination, Thermography on all indoor / outdoor electrical equipments, Periodic maintenance of electrical equipment up to 132kV system, Client and corporate office coordination for resources deployment and work schedule.

Jan 1995-Sept 1998 / KANNUR - INDIA

Employer: Jose Electricals
Project: Various Industrial projects like plywood Industry and maintenance contracts
Position: Site In-charge (Electrical.)

Duties and Responsibilities:
Supervision and planning of day to day work. Controlling of quality/quantity of work and work force. Monitor work progress and report to management. Liaise with client and consultant engineers. Site survey, quantifying material/equipment, manpower required for the project. Supervision, planning and controlling quality/quantity of work and work force.

Educational Qualification

Technical:

„« DIPLOMA IN ELECTRICAL ENGINEERING.
„« INTERNAL AUDITOR TRAINING-ISO 9001 TUV NORD
„« AUTO CAD
„« MS OFFICE
Academic:

„« Pre Degree Course from Calicut University
„« SSLC
Additional Qualifications / Affiliations:
„« Job hazard analysis from National training institute Oman.
„« Basic life support from National training institute Oman.
„« Safety training observation program from Galfar training center.
„« Defensive Driving Training from Special Technical Service and CTJV.
„« H2S Awareness/Gas mask training from Technical service solution Oman/Qatar Gas.
„« Gung Ho ¡VTeam leadership at Galfar training center.
„« Confined Space entry Training from Qatar Gas.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1484)

Go to Search Parameters...

Brief Description

Over 28 years professional experience IT and SAP SECURITY

Master Electrician with Millwright experience

32 years exp in seismic data processing. QC and interpretation

Instrument technician

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

I have experience as a tool pusher and driller.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

Automotive Painter

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

Experienced derrick operator, floor hand, roustabout, and driller

I have been working as a mechanical technician for 19 years. I also have welder and fitter skills and a qualification in Engineering.

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

QA/QC Coating Inspector NACE Certified # 10362

Driller-15 Years Toolpusher-3 Years Oilfield Experience 30 Years

I have practiced my knowledge and expertise in these fields: Gas Measurement, Gas Plant and Gathering Operations, Management, Safety and Environmental awareness.

14 years of oil&gas,petrochmical QC and construction experience

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Seeking mechanical supervisor/mechanic position

Extensive experience in power, petrochemical and utilities plant startup, operation and training

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

14 yrs experience in general welding and fabrication. I have been passed the TESDA (Technical Education And Skill Development Authority) National Competency Test II of 6G SMAW,6G GMAW, and 6G GTAW. Competent of high pressured pipe welding and blueprint interpretation

I have worked in th Alberta and Saskatchewan oilfield since 1983 doing a variety of work. From labour jobs to shop forman to managment.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

Free! I have been in the Oil & Gas industry for the last 19 years. I have worked my way up the ladder from floor hand up to Rig manager and the last seven years as Well Site Supervisor.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

Have surveyor, title abstractor, draftsman, networking and landman experience.

Piping supervisor/ Project Manager

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

I have worked over in iraq working 12 hours a day seven days a week straight for tree months at a time in all types of conditions.....worked as a V S C Manager for 2 1/2 years over in Iraq

Driller/Toolpusher looking for over seas position,has cyber, Top drive & directional experience, 7 years drilling , 15 years derricks, 6 years work over , 1 year geothermal experience. 27 total years experience.

Development Geologist in a clastic reservoirs, integrating Seimic, wire line logs and Core Data. experince in basic petropysical analysis and geocellular models

DRILLING SUPERVISOR , 22 YEARS EXPERIENCE IN OIL & GA INDUSTRY ,OFFSORE & ONSHORE AS A SUPERVISOR FOR 18 YEAR ,DRILLER ,TOOLPUSHER, RIG MANAGER AND DRILLING CONSULTANT

I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET

Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.

Free! Over 25 years experience both Hands On, Inspection and Management

Marine electrical fitter, 20 years experience, trade qualified, was a foreman in the field. Skilled in mechanical / hydraulic servicing as well.

Mud Engineer

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

at present working on cyberbase rig totally computerised

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out