Resume - Electrical Technician Electrical instructor

Misco Jobs

Resume #87194

CONTACT INFORMATION:
View contact information...

Gender                        :            Male
Birthdate                     :            December 03, 1970
Marital Status              :            Single
Health                        :            Physically fit for work
Place of Residence:            No. 354 Bagong Nayon Layunan Binangonan Rizal

Personal Skills
Electrical Technician Electrical instructor
Work in Team Environment secondary school teacher
Participate in Workplace Communication
OTHER CERTIFICATE AND LICENSE.(authenticated and seal)
Technical Education and Staff Development Authority.(TESDA)
NATIONAL CERTIFICATE II (Building Wiring)
Certificate number: 070410020665
Issued on: November 4, 2007
Valid until: November 4,2012
LICENSURE EXAMINATION FOR TEACHERS
License number: 0019415

WORK EXPERIENCE
TAMAS ENGINEERING AND TECHNICAL CONSULTANT
Abu Dhabi united Arab emirates LLC
Start date: August 25, 20008 at present.
Position: industrial electrician / building electrician
DUTIES AND RESPONSIBILITIES:
-         Installing airport lighting cable, coming from transformer and logitrac.
-         Installing secondary cable coming from logitrac.
-         Terminate primary cable using male and female socket which have voltage rating 5000 v or 5kv.
-         Terminate secondary voltage using male and female socket
-         Analyze the cable run, see to it it that the circuit is RWEC, TCC, TEC, PAPI, RWC, RGLC, APC. SBC, AND THDZ CIRCUIT, for insuring right connection.
-         Meggering the airport ligthing cable using megger tester for insuring if it is good condition.
-         Testing and commissioning all lighting circuit.
-         Inform engineer, foremen if the task was done.
DAESUN ELECTRIC AND COMMUNICATION COMPANY
SOHAR OMAN, PETRO CHEMICAL REFINERY PROJECT.
Date started: May 13, 2008
Date end; July 13, 2008

DUTIES AND RESPONSIBILITIES Meggering all types of cable
Cad welding cable
Terminates all types of cable
Install the cable tray

FRANCISCO P. FELIX MEMORIAL NATIONAL HIGH SCHOOL.
Cainta, Rizal Philippines

Start date: August 5, 1998
End Date: April 10, 2007
Position: Secondary School teacher
DUTIES AND RESPONSIBILITIES

teaches students through the presentation of lesson materials, discussions, workshop and laboratory sessions and the use of audio-visual aids and other classroom resources prepares, administers and marks activities to assess students competencies provides feedback and maintains records of students progress liaises with industry to keep up to date with current practice vadvises students on courses and related matters consults with Librarians, Student Counsellors, Education Managers and other support staff may be involved in curriculum development and the preparation of teaching resources

-Maintain and check the condition of lighting, equipment of the building
-teaches basic computer repair.
-installing software and hardware
-teaches the students all electrical topics.

UNIVERSITY OF RIZAL SYSTEM
2nd Floor Star Valley Bldg. Junction Cainta Rizal

Start Date  : June 3, 2007
End Date   : Oct. 3, 2008
Position     : Electrical Instructor (part time)

DUTIES AND RESPONSIBILITIES:    Conduct Lecture and Discussion and Demonstrate the following core of competencies.

Wiring Installation. NC2

-         Interpret technical Drawing and Plans
-         Perform Menstruation and Calculation
-         Maintain tool and Equipment
-         Prepare electrical power and Hydraulic
-         Perform Rough - in Activities for communication and Distribution System -
-        Wiring Devices for Floor and GFCI
-         Install Electrical Protection System auxiliary outlet and lightning fixture
-         Install electrical protection system for lighting and grounding
-         Commission Electrical System

Industrial Machine and Control NCI and NC2

-         Use test measuring instrument
-         Connect motors
-         Installing / Connecting motor for full voltage starting
-         Identify transformer polarities
-         Bank three phase transformer
-         Connect dual voltage three phase motor
-         Install full voltage reversing starter
-         Install reduce voltage starter

Small Electrical Appliances Repair

-         Troubleshoot and repair lighting appliance
-         Troubleshoot and repair motor driven appliance
-         Troubleshoot and repair Heating Appliance

EDUCATION

Institution         :            Mari kina Institute of Science and Technology
Now Mari kina Polytechnic University
City/Country    :            Mari kina City, Philippines
Qualification    :            Bachelor of Science in Industrial Education
Specialize in Electrical Technology
Completed      :            1991

Institution         :            Janosa National High School
City/Country    :            Binangonan Rizal, Philippines
Qualification    :            High School Graduate

Life Goal         :            To have continues career, professional and economic advancement

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1470)

Go to Search Parameters...

Brief Description

Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industries as Lab Technician, Chemist, Operator. Last 9 years working as a Marine Surveyor (Petroleum Inspector) at Kuwait. Can Run & set independent Lab for Petroleum Products. Liecenced driver with ISO Quality system knowhow

Installation of electrical and instrument equipment, commissioning and pre start up, layout plc panel and install plc parts, wiring of motor controls in mcc, and construction works.

Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities.

Computer and management skills, mechanic supervisor, diesel performence and diagnosis, inventory quality and control, have worked in middle east and Africa.

Storeman, Expediter, Roustabout, Clerk

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

Pipe Welder+Metal Fabricator+Iron Worker

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Boilermaker for 15 years petro and power

Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world.

19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Driller/Directional Driller experience, looking for either, and will travel anywhere.

Senior Directional Driller Offshore/Land Domestic International 25+years

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate.

I am a Chemical Engineer by qualification. In my professional career spanning over nineteen years, I have worked in the Marketing function of leading players in the petrochemical industry in India, with regional responsibilities spanning across Asia, Western Europe and Africa.

Electrical Technician Electrical instructor

Applying Insulation and Sheet metal Cladding.

1st class welder fitter i have six full years expierience in this field

Welder ****16 Years Experience***

Skills are; mechanic, HVAC, heavy equipment etc.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

I HAVE 11 YEARS EXPERIECE AS MOTERMAN ,I AM HOLDING PANAMA THIRD ENGINEER UNLIMITED C.O.C

Millwright/Safety

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

Certified CSWIP 3.1 Welding Inspector / Radiographic Interpreter (level 2) and CSWIP / BGAS Site Coating Inspector, seeking an interesting, challenging, fast paced position in the inspection / QC field. Eager to share my experience and knowledge with a position that allows growth and development.

10 plus years as an inspector

DIPLOMA IN MECHANICAL ENGINEERING

Experienced, over 10 years as an instrument control technician commissioning start-up Hydro carbon, fertilizer and petrochemicals plants

Oil field experience in a variety of areas, Supervising drill crews.

I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Professional Experience Mainly related to Industrial and Oil Jobs

Extensive experience in the Electric Sumbersible Pump Industry

15 years experience in the Machinist trade on both CNC and manual machine tools.

Nace 1 Coatings Inspector

Experianced offshore rigger and AB seaman, 200t captain, With US work visa, DSV, AHTS, Supply vessels, jackup barges

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Heavy Equipment Operator

Senior Civil / Structural Designer

I have had both mechanical and condition monitoring experiences which will make me a very competitive candidate to fulfill condition monitoring and/or mechanical position. I have had ISO Cat-II vibration analyst for condition monitoring.

Journeyman Heavy Duty Technician

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out