Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #87568
next resume »»
CONTACT INFORMATION:
View contact information...
OBJECTIVE
To obtain a long-term challenging career in international Oil and Gas industry where I can grow professionally and be rewarded financially.
PREFERENCE
Exploration/Development Reservoir Geophysicist
KEY COMPENTENCIES
* Twelve years of experience in Exploration/Development reservoir geophysics.
* Substantial experience as a Seismic Interpreter as well as broad geophysical experience, both 2D and 3D.
* Good understanding of petroleum systems, basin analysis and prospect evaluation.
* Extensive experience in reservoir characterization in carbonates and clastics environments.
* Good technical knowledge of qualitative and quantitative geophysical evaluation technologies.
* Broad knowledge in computation technology and its application in E&P.
* Have the ability and confidence to work with minimum supervision and support.
EDUCATION
B.S, Geophysical Engineering, Geology Department, Bandung Institute of Technology, Indonesia.
PROFESSIONAL EXPERIENCE
PTTEP International Ltd (November 2007 – Now)
Senior Exploration Geophysicist – Bangkok, Thailand
* 2D/3D Seismic Interpretation and Multi-Attribute Analysis using Landmark Applications Softwares for Block B, offshore Cambodia, Gulf of Thailand, targeting miocene fluvial channel sands of sequence IV and top of oligocene. This exploration project is involving other partners: Singapore Petroleum Company (SPC) and Resourceful Petroleum (Malaysia).
* AVO and Fluid Modeling Analysis
* Data Room analysis. Study all geophysical related data in offshore Cambodia Block-B to seek an opportunity of farming-in within the concession area.
* Proposed 4 wells locations. Two wells approved to drill. One well drilled. Result: not economic, but the progonosed petroleum system worked in the area of interest.
* Mentoring on daily basis to local junior geoscientists.
PETRONAS CARIGALI Sdn Bhd (May 2005 – October 2007)
Exploration/Development Reservoir Geophysicist – Kuala Lumpur, Malaysia
* 2D/3D Seismic Interpretation and Multi-Attribute Analysis using Schlumberger's PETREL, Veritas Hampson-Russell and Landmark Applications Softwares for various development/exploration project fields: Resak-Beranang (Peninsular Malaysia), PC4 (East Malaysia), Ledang-Anoa (Peninsular Malaysia), Malong (Peninsular Malaysia), Calub-Hilala (Ethiopia, Africa)
* Velocity Modeling using Veritas Hampson - Russell, Landmark Depth Team Express and Schlumberger's PETREL for Time-Depth Conversion
* AVO - AFI (AVO Fluid Inversion) analysis on the above Fields.
* Elastic/Acoustic Inversion on pre-stack (the output volumes are acoustic impedance, shear impedance and density) and/or post-stack seismic (the output will be a volume of derived acoustic impedance). The final results are then used to predict logs from other logs, predict porosity from logs, or to predict sonic log from inverted seismic volumes.
* FRM (Fluid Replacement Modeling) on Malong Field.
* Always use Neural Network method as the ultimate algorithm to calculate qualitative and quantitative correlation among Rock Properties and Seismic Attributes.
* Time-lapse seismic analysis using Pro4D on fields: Resak, PC4, Malong.
* Analysis and interpretation of Multi Component (MC) seismic data (PP and PS reflectivity) to help study on Malong Oilfiled on fracture detection, imaging through gas clouds, lithology definition and fluid identification. Also to improve time lapse interpretation by helping to resolve non-uniqueness between pressure and saturation changes.
* Mentoring on daily basis to 7 junior geoscientists.
LANDMARK GRAPHICS Indonesia - Halliburton Inc. Ltd (November 2002 – April 2005)
G&G Consultant, Jakarta – Indonesia
- Achievement: Contribute more than 150% of individual revenue target set by company.
* Full Field Review of Malong-Sotong-Anding of Petronas Oil Field
- The work includes: 3D Seismic volume-based Interpretation and detail mapping, Velocity Modelling, Time to Depth domain conversion.
* Data Migration Project from Schlumberger's Geoquest Database to Landmark's Openworks Database:
1. Pertamina Balikpapan – Indonesia
2. ConocoPhillips Indoneisa
* Instructor for Landmark Application suites Courses series: OpenWorks, Seisworks, GeoProbe, Depth Team Express (DTE), StratWorks.
* Data Room Support for Texas-based El Paso farm-out oil fields.
* Onsite Project Consultant for Medco Energi and ConocoPhillips Indonesia
* Application Support for Pertamina Donggi Study
CHEVRON INDONESIA Inc Ltd (August 1997 – Dec 2002)
Geoscientist, Riau, Sumatera - Indonesia
* 2D/3D Seismic Interpretation using Geoquest Software
Results:
* 28 successfull infill wells, with oil production ranging from 500 to 1500 BOPD
* Helping Drilling Engineers to land on best target on deepened wells
* Velocity Modelling using Chevron's Velocity Toolkit
Results: Better Time to Depth domain conversion, successfully identify bypassed zones
* AVO and Seismic Inversion using Hampson-Russel Software
Result: Successfully delineate shallow gas distribution to help drilling team reducing drilling cost by using 2 strings instead of 3 strings
* Well Logs Database Management and QC using Finder Software
Result: A solid, ready-to-use and updated well logs database for subsurface team members
* Earth Model Building using GOCAD Software
Result: The Model can be used to be an effective tool to help reservoir engineers to make a surveillance study in waterflooded field and to aid production technologist engineers in designing well completion strategy.
* Wellsite Geologist for more than 30 Development/Directional Wells. The work included:
1. Performing wellsite works i.e.: identify lithology and hydrocarbon show from cutting/sidewall core/core chip samples, control MWD/LWD, supervise mud logging unit and wireline logging job, performed coring job, correlation – set casing / TD.
2. Post drill well reporting and development well evaluation.
MAXUS SouthEast Sumatera Inc. Ltd (May 1996 – August 1997)
Geophysicist, Jakarta - Indonesia
* 2D/3D Seismic Interpretation
* Well Logs Database QC & Data Management
WRITING SKILL:
* Poster on PTTEP 12th Technical Forum 2008: Seismic Data Compression Methodology
* Computer Network Vulnerability: Security Risk – CPI Internal Team
* New Method of soft-Digitizing Old Hardcopy Maps for Annual Reserves Book Preparation – CPI Internal Team
* Using Neural Network for Time-Depth Conversion and Extracting Rock Properties – CPI Internal Team
* Preparing Digital Images for an Efficient Presentation – CPI Internal Team
EDUCATIONAL EXPERIENCES:
* June 1993
Field Geological Mapping at Karang Sambung District, Igneous- Metamorphic-Sedimentary Area, Central Java, Indonesia.
* September 1993
On the job training in Seismic Data Processing, Nusantara Sistem Informasi (NSI) – Western Geophysical, Bandung, Indonesia
COURSE/TRAINING:
* Integrated Interpretation in Landmark Environment, Kuala Lumpur Malaysia
* Building Earth Model using GOCAD, Duri – Riau, Indonesia
* Geophysics School by Dr Peter Morse, Duri – Riau, Indonesia
* Geoframe: IESX and CPS3 for Advanced User, Jakarta Indonesia
* Reservoir Geomechanics: Earth Stress and Rock Mechanics Applied to Exploration, Production and Wellbore Stability, by Dr David Castillo, Duri – Riau, Indonesia
* Geolog for Formation Evaluation, by Dr Robert Gulco, Pekanbaru Indonesia
* Seismic Stratigraphic Interpretation and Modeling, by Prof. Norman S. Neidell, Jakarta Indonesia
* Subsurface Mapping Technique, Duri Riau, Indonesia
* Geostatistics for Reservoir Characterization by Dr Mohan Kelkar
* Coring & Core Analysis by Dr. Robert A. Skopec, Duri Riau, Indonesia
* 3-D Seismic Interpretation Advanced Technique, Duri Riau, Indonesia
* Voxelgeo Introduction & Workflow, Duri – Riau, Indonesia
* Sequence Stratigraphy Workshop, Duri – Riau, Indonesia
* Seismic Attribute for Reservoir Characterization, Bandung Institute of Technology, Bandung Indonesia
* Seismic Inversion for Reservoir Characterization, Bandung Institute of Technology, Bandung Indonesia
* Seismic Sequence Stratigraphy, Bandung Institute of Technology, Bandung Indonesia
* Jason Geosystem: Generating Acoustic/Elastic Impedance Map, Jakarta, Indonesia
* Decision Analysis, Duri – Riau, Indonesia
* Technical Writing, Duri – Riau, Indonesia
* Test of English as a Foreign Language (TOEFL), Grade 570
* Total Quality Management, Duri – Riau, Indonesia
* Presentation and Facilitation Skill, Pekanbaru - Indonesia
PROFESSIONAL
Member of SEG (Society of Exploration Geophysics)
LANGUAGE
Indonesian, English, Sundaneese
NATIONALITY
INDONESIAN (passport number: P686679)
BIRTH DATE
15 August 1971
MARITAL STATUS
Married with 2 children
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1 to 50 of 1482)
Go to Search Parameters...
Brief Description
Free!
Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free!
Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR
HVAC FOREMAN
Rigging & Lifting Specialist
Document Controller with 10 years experience in Oil & Gas industry
Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie
Driller with 9 years experienc on land rigs and 24 yrs. total exp. in drilling field
I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.
Drilling Supervisor with directional, horizontal experience .
Have more than 13 years of experience in log interpretation
Document Controller - Certification Supervisor cum Math/Physics/Computer Instructor
ITI(NCTVT)ELECTRICIAN) with liecence
Level III vibration Analyst with electronic and mechanical background
Instrument Pipe fitter / supervisor
More than 15 years working experience in Electrical/Electronics & Telecommunication.
Instrument Technician Radio technician Scada-moscad
My strengths lie im my ability to manage available resources and communicate with others
Driller / Tool Pusher (Onshore / Offshore)
Experienced PROJECT MANAGER with 10 years experience training and leading development teams to
Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.
Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic
Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.
15+ years of IT experience and 6 years of SAP BWv7 and SAP R/3 ABAP experience. I would like to introduce myself as a Consultant, having an Attitude & Aptitude for Analysis, with range of skills in Technical arena. I do have solid Experience in Conceptualizing, Developing.
Master Electrician
Qualified Welder / Fitter / Mechanic
Piping superintendant with 35 years experience in the oil and gas industry
Diagnose and repair engines, transmission and final drive systems including manual and automatic transmissions
Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w
Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).
Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician
Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen
Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion
I have worked in the Oil & Gas industry for over 20 years
Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard
Senior Welding Inspector QA/QC
20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.
been welding for 25 plus years...
Industrial Electrician
Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.
I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.
I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing
Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience
39 years experience running both surface & mineral titles & preparing reports
Expert Exploitation / Development Geologist w/ up-to-date computer skills. Directly responsibile for generating and executing over 500 projects including 167 development wells, 72 step-out exploration wells and 285 recompletions in 39 oil and gas fields worldwide, with 92% economic success rate.
Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.
I am seeking a long term employment contract within a company as Rigger.
Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.
Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.
23 years of sales experience including positions as a sales representative, sales trainer and sales manager. I work very well with the public. I know how to close the client and get the answer I am looking for.
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Seach Parameters
Change search parameters...
CATEGORIES:
Trades/Skilled;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com