Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87752 next resume »»
CONTACT INFORMATION:
View contact information...

Objective
To take my skills and talent that I've acquired as a craftsman and business owner and put them to use for a highly respected, reputable company. To put my natural leadership skills and ability to supervise to work for a company that takes pride in it's quality and attention to detail.

Qualifications
Most recently I have owned my own framing business for the last 9 years. I have continued to work on the job sites to ensure my product is nothing less than exceptional. With my experience in the construction industry being so varied, I have gained my Class A to operate various tractors, trailers, trucks, and pieces of equipment. I have always maintained and worked on my own equipment and vehicles, my skill and experience in mechanics dates back to when I was a teenager working out of our own garage. My skills are diverse, as I have worked in many areas of construction, including roofing, siding, block, plumbing, stucco, demolition, and general remodeling. I have also worked both residential and commercial, single family and multi-family projects. I work well with others, possess strength in leadership, and communicate well with homeowners/ clients, contractors, inspectors, and other subs alike I have experience in heavy equipment operations including- skid steers, many all terrain fork-lifts (Petty bone, Lull, Ingersol-Rand, New Holland), dump trucks, day cab tractor trailer, doc trucks, clam trucks, mini track hoes, and a variety of tractors. My driving record is clean and health card current.

Relevant Experience
7/2008-1/2009 Ice O-Metric Contracting Inc., Big Lake, MN
General laborer. We worked on the St. Cloud Army National Guard helicopter base addition. I installed a foam insulated steel panel system and commercial grade steel trim. Misc. steel framing. All Commercial.

2/2003- 6/2008: Morlock Construction, Zimmerman, MN
Owner and supervisor for framing crew. I read blueprints, created bids, and framed new construction and remodel, while acting as the job superintendent for the builders that I worked for. Jobs have included both single family and multi-family projects.

9/2005-7/2005 Brylock Contractors, Gulf Port, MS
Partner/ owner. This was a partnership that was formed by myself and another individual in response to the need for workers in MS after Katrina. Most of our work was non-profit, and when I say non-profit, I mean we did not charge for our services. We did demolition and rebuilding both residential and commercial.

7/2001- 2/2003: MBM Construction, Zimmerman, MN
Partner/ owner. A three way partnership of a new home construction framing company.

Other companies employed with:
CSN Construction: Zimmerman, MN
Remodeling and additions.
Chad Nasby, owner, 763-286-7322

Bakken Builders: Big Lake, MN
Sub-contractor, framing, remodeling.
Commercial and residential.
DJ Bakken, owner, 763-263-3900

Palmer Homes North: Ramsey, MN
Framing and remodel.
Jason Palmer, owner 763-464-2511

Cairnes Construction: Elk River, MN
Lead carpenter, crew supervisor. New home framing.
Rob Cairnes, owner, 763-238-7340

Sierra Corporation: Blaine, MN
Lead carpenter, new home framing.
John Likum, owner, 763-783-9616

Mark's Stucco: Ramsey, MN
Stucco laborer
Mark, owner 763-427-7344

Anderson Plumbing: St. Francis, MN
Out of business, number not available

All Home Remodeling, Greenfield, MN
Framing, general construction.
Ray Schreckenghaust, owner, 612-685-2676

Viking Pattern and Mold, Blaine, MN (1990's)
Mold maker
763-746-4004

Carley Foundry, Blaine, MN (1990's)
Mold Maker
763-780-5123

Certificates/ Licenses
Class A CDL, MN.
Forklift certified
Permit to carry a concealed weapon, MN.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1001 to 1050 of 1485)Go to Search Parameters...
Brief Description
Water Survival, Safe Gulf, Trained in CPR and First Aid, Rigging Certifications
Precision Millwright w/ Machinst and Electrical Background
Welding and electrical and management and mining class 32 hour certified fork lift operator
Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration
In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.
Hardworking, easy learner,..... Bachelor of engineering in instrumentation
Piping and Welding Supervisor QA
Prventive check-up/fixin Pump of diverse kind/calibrate labs instruments/operates main instruments in a water plants
Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management
A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.
Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan
Operations Supervisor - Overseas experience
I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS
I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial
HSE Specialist
BSc in Economics(First Class), ACICMN, AICEN
Geoscientist. I am a highly qualified, versatile geoscientist with 7 years of Petroleum industry experience, 2+ years in Processing Geophysics with a major global energy company.
Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical
Senior Instrumentation Specialist / Designer
In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.
been in oil field for 2 years, been in some type of managment for over 7 years
35 + year mechanic
15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop
Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management
Logistics, Technology, Transport and Management Professional
Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)
International Business Development - Africa/Europe/Middle-East
Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.
Power Generation Technician
Unlicensed Engineer, Diesel Mechanic
Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3
Maintenance, HVAC, MAnagement and Supervision, Safety
Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering
Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer
I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.
Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as
Good at learning and implementing, target oriented, flexible and can work under any conditions
30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !
Fitter Including Machining and Diesel Fitting
Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in
Landman - Full Title, Curative Work, Draft Clearance, Due Diligence and Leasing Experience
Construction manager, laborer, Class A CDL Drivers license, mechanic
Maufacturing Automation
Mechanical, electrical, structural maintenance & repair, estimating, project supervision.
Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager
My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
NACE Level II Certified Coating Inspector, Certified Welding inspector
MWD/LWD Specialist with 3 years of Professional Oilfield Experience, Associate Degree holder in Mechanical Engineering, Got Specialised Trainings in Academy from SCHLUMBERGER & BAKER HUGHES for "MWD Technology"
10y in National Oil company, HND Mechanical, 4y Artifical lift pumps Technican, 4y Drilling & Wellservices information mangment Engineer
Free! Industrial construction electrician with two years maintenance in open pit mine
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   [ 21 ]   22   23   24   25   26   27   28   29   30  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com