Resume - Instrument Supervisor

Misco Jobs

Resume #87756

CONTACT INFORMATION:
View contact information...

FIELD OF INTEREST:

To work in the field of Process Instrumentation and Controls, Fire and Gas detection system, Process operation and Electrical & Instrumentation engineering works.

JOB OVERVIEW:

* 14 years experienced in the field of Instrumentation and controls works.
* Recently worked as Instrument Loopcheck Supervisor in Dung Quat Refinery project.(Vietnam)
* Experienced in supervision and inspection in Instrumentation Installation works.
* Supervised in calibration of process variable instruments, loop checking and commissioning of process controls with extensive experienced in troubleshooting loop control faults and carry out logic sequence check of a process controls that interface with (DCS) Distributive Control System and (PLC) Programmable Logic Controller automation equipment.
* Supervised during commissioning and start-up of Oil and Gas plant, Water treatment plant and Power plant, responsible for rectifying all instrumentation and controls troubles. Also involved in warranty period, performing some maintenance job.
* Experienced as Fire and Gas Supervisor maintenance in Gas plant.
* Worked as Instrument and Controls Engineer in Power plant project.
* Worked in Oil and Gas, Power and Petrochemical plant process instrumentation and controls.
* Well verse in the interpretation of Instrument loop diagrams, piping and instrument diagrams, Signal flow diagrams, wiring diagrams, Panel drawings, PLC ladder diagram and Wire lists.

EDUCATION, TRAINING & SEMINAR:

* Graduate of Bachelor of Science in Electrical Engineering
Cebu Institute of Technology (Cebu City, Philippines)
June 1986 to October 16, 1993

* Total Quality Management Orientation Seminar
EEI Corporation (Quezon Power Plant Project) November 20, 1998
* Training on Instrumentation & Control of Electrical Equipments
Don Bosco Training Center (Cebu City) June 15 to Oct. 17, 1992
* Seminar on Electrical Machines & Equipment
Cebu Institute of Technology (Cebu City) December 16, 1992

OTHER SKILLS:

* Involved and experienced in Carbon Dioxide gas processing generation, Water demineralizer operation and process in Drinking water treatment.
* Knowledge in Microsoft Windows (Word, Excel, Access and PowerPoint).

WORK EXPERIENCE:

October 23, 2008 to April 30, 2009
Position: Instrument Loopcheck Supervisor
Employer: Technip Consortium
Project: Dung Quat Oil & Gas refinery project (Vietnam)

Job Description:

* Coordination with the Instrument QC inspectors related to the instruments installed that are ready for loopchecking.
* Preparation of documents related to loopchecking such as loop folder.
* Responsible for assigning loop to technicians that are ready for loop checking.
* Recording number of loops that done in a particular system.
* Giving technical advice to technicians if there is a trouble in loops.
* Coordination with DCS engineers and system specialist if a loop is related to the DCS logic.
* Acknowledge and resolve punchlist items that arise during loopchecking such as system and construction punchlist items.

August 10, 2007 to June 30, 2008
Position: Instrument Supervisor
Employer: Foster Wheeler Italiana (World Services Italia)
Project: Ethylene Glycol 2 Project (EQUATE) Kuwait

Job Description:

* Responsible for the monitoring of subcontractor works including issuance of instrument materials during installation.
* Update the progress of instrumentation works done by subcontractor.
* Decide as built Instrumentation installation works as per design standard.
* Prepared and update new revision of instrumentation design drawing.
* Planning and scheduling of instrumentation works according to the priority system.
* Coordination and supervision of instrumentation installation works at site.
* Anticipating all the problems that may come out during the instrument installation especially issuance of materials and making sure all are available in terms of completion schedule of the priority system.
* Checking the quality of instrumentation erection works.
* Raise Extra Work Request for changes to contractor scope of work.
* Proactively participate in all safety matters affecting the construction of the project.

May 23, 2007 to July 18, 2007
Position: Electrical & Instrument QA/QC Inspector
Employer: Chicago Bridge & Iron (CBI)
Project: Ras Gas Common Offplot Project
Ras Laffan, Doha, State of Qatar

Job Description:

* Assigned in Butane, Propane and Condensate tanks, responsible for inspection the quality of electrical and instruments materials before it is installed and it should conform to E&I method statement and quality control procedure.
* Review the specifications and project standards for the installation of Electrical and Instruments materials and making sure it must conforms of the said project specifications and standards.
* Performed inspection and witness the quality of Electrical and Instruments installations done by Electrical & Instrument subcontractor.
* Attend minutes of meeting discussing the Electrical and instrument work progress and other E&I work matters.
* Giving some advice and comments to Electrical and Instrument subcontractor works in relation with the quality of their works before handover to the clients for final acceptance.
* Preparation of documents for inspection works purposes such as Inspection request documents for electrical and instrumentation works.
* Interfacing with the subcontractor and client for the final acceptance of electrical and instrumentation works.
Dec. 07, 2004 to January 11, 2007
Position: Instrument/Fire and Gas maintenance supervisor
Employer: Tyco Fire and Security U.A.E
Client: GASCO (Habshan) Abu Dhabi Gas Industries Ltd.

Job Description:

* Performed and Supervised preventive maintenance of PLC (Allen Bradley) based fire and gas detection system such as UV/IR, Flammable, H2S and SO2 detectors in different areas of gas plant.
* Rectify faults or troubles on fire and gas detectors installed in turbine gas compressor which is controlled by HOW panel fire detection system.
* Performed preventive maintenance of smoke, heat detectors and manual call points in substation and control room includes checking of deluge system installed in the plant.
* Performing preventive maintenance of CO2 and Inergen gas extinguishing system control installed in substation, Instrument Equipment shelter and in Turbine enclosure.
* Performed preventive maintenance and fault rectification of SIMPLEX panel based fire detectors.
* Performed call out duty if there is any trouble in fire and gas system in Gas plant.

July 2, 2003 to Dec. 28, 2003
Position: Senior Instrument Technician (Commissioning)
Employer: Industrial Maintenance International Ltd. (IMI)
Project: Chad/Cameroon Oil Development Project (Chad, Africa)
Main Contractor: TChad Cameroon Constructors (TCC)

Job Description:

* Involved in calibration and commissioning of monitoring instruments installed in oil pump station such as Vibration monitor (Bently Nevada), winding temperature of the electric motor, includes commissioning of Lube oil controls of pumps and motor.
* Assigned in metering skids responsible for calibration of flow transmitter and control valves.
* Carry out logic sequence check that checks against the cause and effect diagram to make sure that logic is correct before starting the motor oil pump station.
* Also, assigned in Central treating facility, Responsible for calibration of pneumatic control valves and loop checking of process instruments that is controlled by (HONEYWELL) DCS.
* Commissioning of process instruments and controls installed in different skids such Vapor Recovery skid, Heating & Wash module skid and Produced Gas Compressor skid, all these skids are using PLC (ALLEN BRADLEY) controls.

December 06, 1999 to Oct 30, 2002
Position: Senior Instrument Technician
Employer: Engineering Equipment Inc. Corp. (EEI)
Project: Phase 2 Power and Desalination Plant Project
Saline Water Conversion Corporation (SWCC) (Jeddah, K. S. A.)
Main Contractor: Saudi Arabian Bechtel

Job Description:

Assigned in water treatment plant area that consists of CO2 gas plant, Deminiralizer skid, Water filter plant for drinking purposes and Chemical dosing skids for Boiler and Desalination plant.

My main duty is to calibrate, loop check and commission all the process instruments and analyzers to prove the instruments accuracy and loop integrity. After all the system is ready for operational I am also involved in start up of those plants with the operation personnel and during on start up, I am responsible for rectifying loop control faults and assist for fine tuning on the controls of the plant. Controls of those plants are interfaced with ALLEN BRADLEY (PLC) and ABB PRO CONTROL P (DCS)

Assigned also in five units of Boiler plant with a capacity of 118 MW per unit. I am involved in loop checking of process instruments also rectifying loop control faults that interfaced in ABB DCS.
After all the plants is in operational I am involved in warranty period of those plants that doing some maintenance job before it is finally turn over to the client.

July 08, 1998 to July 1999
Position: Instrument & Controls Engineer
Employer: Engineering Equipment Inc. Corp. (EEI)
Project: Quezon Power Plant Project (Coal Fired) (Quezon Province, Philippines)
Main Contractor: Bechtel Overseas Corporation

Job Description:

* Take off materials for instrumentation installations with reference to installations details.
* Coordination with the other Field Engineers on construction engineering matters in relation of instrumentation installations and works scheduling.
* Perform field inspection of instruments installed & responsible for recording at computer database for production report.
* Responsible for the supervision and development of work packs for technicians.
* Analyze and interpret control system of the plant in preparation for the logic cause and effect check.
* Perform field as built design of instrument installations during construction.
* Provide technical documents to technicians such as wire list, panel list, loop diagrams and P&ID for reference in pre commissioning and commissioning works.
* Rectify punch list works as per Client comments.

July 07, 1997 to April 20, 1998
Position: Senior Instrument Technician
Employer: Engineering Equipment Inc. Corp. (EEI)
Project: Petron Refinery Expansion Project (Bataan, Philippines)
Main Contractor: DAELIM

Job Description:

* Assigned in refinery expansion unit, performing bench & field calibrations of process instruments.
* Functional check & calibration of pneumatic controllers & control valves (Fisher & Masoneillan)
* Perform loop checking of instruments installed for the preparation of start up.
* Attend troubleshooting on instruments & loop control faults during start up.
* Assist equipment vendor in commissioning the control system of oil pump station unit of refinery expansion.

March 06, 1996 to April 1997
Position: Instrument Technician
Employer: M. Al Mojil Group
Project * Methyl Tertiary Butyl Ether Plant Project (Jubail. K.S.A)
* Petrokemya Plant (Petrochemical Plant Rehabilitation project) (Jubail, K.S.A)
Main Contractor: Brown & Root Saudi Limited

Job Description:

* Participate in setting up of Calibration shop, includes lay outing of pneumatic tubing for pneumatic calibration purposes and list down all calibration equipments to be used in calibration shop.
* Responsible for bench calibration & testing of all incoming instruments before turnover to construction group for field installation.
* Later on assigned in field for loop checking and testing of transmitters, indicators, control valves & recorders for proper setting of instruments.
* Assigned in Petrochemical plant for instrumentation rehabilitation & responsible for reconditioning of all process instruments.
* Perform field calibrations in accordance with the new instrument location such as Differential pressure & Flange type installation of level transmitters.

Jan. 1995 to Jan. 1996
Position: Instrument Technician
Employer: Engineering Equipment Incorporated Corp. (EEI)
Project: *PETRON (Petron Refinery Expansion Project) Jan. 1995- March 1995
*Qatar Gas LNG Plant Project (Ras Laffan, State of Qatar)
(March 1995 -Jan 1996)
Main Contractor: CHIYODA

Job Description:

* Assigned in Gas & Oil desulphurization unit at Petron refinery expansion project performing testing & calibration of process instruments.
* Responsible for testing & calibration of all pneumatic controllers & valves for the Gas & Oil desulphurization unit of the plant.
* Involved in loop check out of process instruments based on YOKOGAWA DCS control system.

* At Qatar project, Assigned in Nitrogen plant, Boiler & Air compressors assisting equipment vendors in calibration and commissioning process instrumentation.
* Assist in DCS logic sequence check of process instrumentation based on FOXBORO DCS.
* Perform setting up of vibration monitor of air compressor unit of the plant (Bently Nevada).

Feb. 1994 to Nov. 1994
Position: Instrument Technician
Employer: Trigon Management & Industrial Corporation
Project: SHELL Refinery Expansion Project (Batangas, Philippines)
Main Contractor: Fluor Daniel Pacific Inc.

Job Description:

* Undergo training on Basic Instrumentation & Control system for duration of one month conducted by the company.
* Assigned in Pilipinas Shell Petroleum Corp., performing bench calibration of electronic transmitter, pressure gauges & testing of pneumatic control valves.
* Assist YOKOGAWA (DCS) vendor in commissioning of plant control system.
* Involved in loop checking on process instrumentation.
* Marking up of instruments calibration sheets after work has been completed.
* Other duties & responsibilities taken upon the request of my Immediate Superior.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1484)

Go to Search Parameters...

Brief Description

Rig Electrician with over 10 years of service in the oil Industry.

willing to travel, would find it a bonus to any contract or in house petroleum land man position.

Well test supervisor

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Machinist- licenced

COATING INSPECTOR CV

Instrument Supervisor

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Turbine tech.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Experienced Floorhand/Roughneck

I wish to work in a challanging environment of the oil industry

Attorney and Landman with excellent tract record of acquiring Oil and Gas Leases. Over 10 years title experience, with specialized training in probate and non-probate transfers of property interests; including trusts and all matters relating to the administration of estates. Diversified experience

I’m extremely interested in obtaining a post either as Geophysicist / Geologist / Petrophysicist or any relevant position that fit my education back ground. I have outlined some working experiences and developed talent in geology (Geocience) about myself in the Resume attached for consideration

• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Senior Mechanical Draughtsman(MEP)

Asset Management Application Support

To Become employed as a Instrument Tech, Instrument Designer, or Process Operator

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

sales, marketing, business development general management

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Welder

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

Worked service rigs for 2.5 years

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out