Resume - Experienced derrick operator, floor hand, roustabout, and driller

Misco Jobs

Resume #87788

CONTACT INFORMATION:
View contact information...

Objective: To obtain a drilling position where my hard work, extensive knowledge, skill and aptitude to learn can be tested and utilized

Education:
* Whittier Christian High School
* Cypress College (General Education)
* Computer Career Connection (Computer Repair A+Certification)
* East Los Angeles Occupational Center (Electrical)

Qualifications:
* RCO certification
* I have received safety awards for hours worked without accidents and injuries.
* Able to operate a forklift and backhoe
* I have many years experience in the oilfield industry and construction field.
* Have extensive knowledge of tail-gate meetings.
* I have trained floor hands and derrick operators
* I have qualifications to be floor hand, derrick operator and driller

BC2 Environmental Drilling 11/27/06 – 2/12/08
Helper
* Loaded trucks with cement, concrete, sand, gel and asphalt.
* Assembled and positioned machines, augers, casing pipes, and other equipment,
* Operated forklifts to move pellets of various materials.
* Changed the drill bits according to the type of strata, using hand tools.
* Cleaned trucks, work areas, and drill rigs
* Followed and enforced safety procedures.
* Perform other duties as may be assigned.
* Inspected core samples to determine nature of strata, and gave samples to geologists for analysis.
* Cleaned and prepared sites for excavation and boring.

KENIA DRILLING 12/13/01 - 04/21/03
Floor Hand
* Get equipment together for that day's projects.
* Cleaned up work areas and removed debris after extraction activities were completed
* Perform other duties as may be assigned
* Organized materials in order to prepare for use
* Drilled or bored holes in rock for blasting, grouting, anchoring, or building foundations.
* Used tongs to connect and disconnect drill pipe, equipment maintenance, assisting in lay casing after well is drilled, assisting other members of the crew as needed
* Changed drill bits

NABORS DRILLING 06/02/01 - 12/03/01
Derrick Operator
* Control the viscosity and weight of the drilling fluid and pumps.
* Inspect derricks for flaws, and clean and oil derricks in order to maintain proper working conditions.
* Supervise crew members, and provide assistance in training them.
* Retrieved and ran pipe in to holes

POOL WELL SERVICES 04/26/99-06/01/01
Floor Hand/Derrick Operator
* Guide lengths of pipe into and out of elevators.
* Steady pipes during connection to or disconnection from drill or casing strings
* Control the viscosity and weight of the drilling fluid and pumps.
* Retrieved and ran pipe in to holes
* Changed drill bits
* Used tongs to connect and disconnect drill pipe

BEYLIK DRILLING 0- 08/01/96-4/25/99
Floor Hand/Driller
* Drove or guided truck-mounted equipment into position, level and stabilized rigs, and extended telescoping derricks.
* Placed and installed screens, casings, pumps, and other well fixtures in order to develop wells
* Worked on a double stage drilling rig
* Tightened and loosened pipe in and out of hole and got samples for casing builders
* Operated a back hoe to retrieve materials and clean out pits
* Also learned to drill under supervision of Mike Hart.

VECO DRILLING -01/95-07/96
Roustabout
* Assigned to an offshore rig site on Thumbs Islands on a 7 day on 7 day off schedule. Was also assigned to rigs on Island White and Grissom in Long Beach
* Worked on platform harvest in Santa Barbara
* I put pipe on cat walk for floor hands above, greased all moving parts to ensure proper working condition
* Cleaned up drill rig work areas
* Loaded and unloaded all supplies using forklifts
* Put fuel in rigs and relieved floor hands when necessary
* Made sure while picking items up all slings were good stayed out of pinch point areas and made sure shackles were tight.
* Assisted other members of the crew as needed, and "general housekeeping"

ARCO REFINERIE - VECO INC. 05/94-12/94
Electrician's helper
* Primary duties included assisting electricians to install, repair, replace and maintain electric systems, appliances, and equipment
* Tasks ranged from reading meters in dimly lit areas to working in areas of hot temperatures with poor ventilation, using hand tools and saws to cut conduit and wires, and carrying tools and equipment up and down stairs.
* Assists electricians in cutting, bending and in the assembly and installation of electrical conduit.
* Install conduit, wiring and related devices for refineries
* Pull wires through raceways and conduits, mounting outlets and switches
* Trace out short circuits in wiring, using test meter.
* Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets
MOBIL REFINERIE - IRWIN INDUSTRIES -01/92-3/94
Fire watch
* Stayed at work areas for 30 minutes after crew to ensure that fires did not ignite
* Measured toxicity levels to ensure that workers were safe to enter work area
* While crew was working, manned the area with fire hose and extinguisher

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1484)

Go to Search Parameters...

Brief Description

Over 28 years professional experience IT and SAP SECURITY

Master Electrician with Millwright experience

32 years exp in seismic data processing. QC and interpretation

Instrument technician

Rotating Equipment Specialist/Vibration and industrial Balancing experiences

(PRODUCTION MANAGER)

I have experience as a tool pusher and driller.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

Automotive Painter

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

Experienced derrick operator, floor hand, roustabout, and driller

I have been working as a mechanical technician for 19 years. I also have welder and fitter skills and a qualification in Engineering.

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

QA/QC Coating Inspector NACE Certified # 10362

Driller-15 Years Toolpusher-3 Years Oilfield Experience 30 Years

I have practiced my knowledge and expertise in these fields: Gas Measurement, Gas Plant and Gathering Operations, Management, Safety and Environmental awareness.

14 years of oil&gas,petrochmical QC and construction experience

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Seeking mechanical supervisor/mechanic position

Extensive experience in power, petrochemical and utilities plant startup, operation and training

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

14 yrs experience in general welding and fabrication. I have been passed the TESDA (Technical Education And Skill Development Authority) National Competency Test II of 6G SMAW,6G GMAW, and 6G GTAW. Competent of high pressured pipe welding and blueprint interpretation

I have worked in th Alberta and Saskatchewan oilfield since 1983 doing a variety of work. From labour jobs to shop forman to managment.

SAFETY AND FIRE TRAINING OFFICER AND ALSO A QUALIFIED PARAMEDIC.

Free! I have been in the Oil & Gas industry for the last 19 years. I have worked my way up the ladder from floor hand up to Rig manager and the last seven years as Well Site Supervisor.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

Have surveyor, title abstractor, draftsman, networking and landman experience.

Piping supervisor/ Project Manager

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

I have worked over in iraq working 12 hours a day seven days a week straight for tree months at a time in all types of conditions.....worked as a V S C Manager for 2 1/2 years over in Iraq

Driller/Toolpusher looking for over seas position,has cyber, Top drive & directional experience, 7 years drilling , 15 years derricks, 6 years work over , 1 year geothermal experience. 27 total years experience.

Development Geologist in a clastic reservoirs, integrating Seimic, wire line logs and Core Data. experince in basic petropysical analysis and geocellular models

DRILLING SUPERVISOR , 22 YEARS EXPERIENCE IN OIL & GA INDUSTRY ,OFFSORE & ONSHORE AS A SUPERVISOR FOR 18 YEAR ,DRILLER ,TOOLPUSHER, RIG MANAGER AND DRILLING CONSULTANT

I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like

I posses about 19+ yrs. rigorous, qualitative experience having been associated with leading Oil Exploring Companies. I have experience in directional drilling & under balanced.

SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET

Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.

Free! Over 25 years experience both Hands On, Inspection and Management

Marine electrical fitter, 20 years experience, trade qualified, was a foreman in the field. Skilled in mechanical / hydraulic servicing as well.

Mud Engineer

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

at present working on cyberbase rig totally computerised

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out