Resume - Experenced equipment mechanic currenty working for a Caterpillar dealer

Misco Jobs

Resume #88035

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
I am seeking a mechanic position with good and professional company with a rotating schedule. I am a certified Caterpillar mechanic with troubleshooting, diagnostic and repair ability. I am highly motivated and dedicated to my work. I am used to working long hours in harsh conditions to get the job done.

MAJOR ACCOMPLISHMENTS:
I have operated, oiled and repaired most Caterpillar and related machines for the last 14 years. I have worked for a Caterpillar dealer for the last 2 and a half years and I have worked for 2 other construction companies the 12 years prier.

EXPERENCE
3/2007-Present Wagner Equipment Company Grand Junction, Co.
Journey Field Equipment Mechanic/Power Systems
I have worked for Wagner Equipment Company, Caterpillar dealer for the last 2 and a half years as an earth moving field mechanic. While being employed at Wagner I have attended many training classes such as electrical troubleshooting, transmission and various engine classes. The last classes I attended were natural gas engine 1 and 2 for 3500,3600 and GMA gas engines. Most experience I have learned has been from on the job training in the last several years. I mainly work on dozers, motor graders, loaders, haul trucks and excavators. However lately I have been working with the power systems group repairing engines and performing overhauls.

5/2003-3/2007 Sema Construction Denver, Co.
Oiler/Heavy Equipment Mechanic
When I started working for Sema Construction I was mainly an equipment oiler. I fueled and serviced Caterpillar and Komatsu equipment and also serviced Mack and Kenworth trucks. After a year of oiling and servicing equipment I began to troubleshoot, diagnose, and repair machines in the field. In 2006 I moved to Grand Junction Colorado where I managed all of the maintenance for a 50 million dollar road job. I left Sema in 2007 to work for the local Caterpillar dealer to gain experience and knowledge. When leaving I gave notice and left on good terms.

5/1995-4/2003 Ames Construction Carlin, NV. And Denver, Co.
Equipment Operator/Oiler
I started working for Ames directly out of high school. When I began, I operated scrapers, dozers, compactors, motor graders and haul trucks. I mainly worked on mine sights building roads and stripping top soil for the new waste dumps. While working for Ames I traveled to many states following the work, such as Nevada, Utah, Wyoming and Colorado. In 1999 I changed positions from an operator to an oiler. I fueled and serviced many different kinds of equipment such as Caterpillar, Komatsu, John Deere, Mack and Kenworth to name a few. I left Ames Construction and went directly to work Sema Construction. When leaving I gave notice and left on good terms.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1485)

Go to Search Parameters...

Brief Description

Journeyman Electrician looking to advance

I am a trained and experienced Steward with excellent Floorhand training. Security Clearance Canadian Government Enhanced Security Clearance *willing and able to relocate *Marine Medical completed March 3 2004

I am working as Plant Operator in Refinery & Petrochemical Units since last 08 years Reliance Industries Ltd. [Petroleum Division, 650 KBPSD crude processing capacity]

Senior/DCS Operator or supervisor Position.

15 years experience in construction, labor, maintenance and natural gas industries, holding positions such as Derrickman, Floor Hand, Motor Hand, Driller, Mason, Top Laborer, Sheet Metal Fabricator/Installer, Duct Board Fabricator, HVAC Installer, Roofer, Landscaper and Handyman.

Training in various safety, survival, and drilling courses to become a valuable asset to the oil and gas industry.

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Deck officer with five years of work experience on board of AHTS’s, OSV’s, Container, Con-Ro and other vessels as Cadet/OS, 3rd Mate, 2nd Mate, Chief mate and Relief Captain.

15 years experience of Finance Analysis, Cost Control, Finance Reporting and Internal control experience / OIL AND GAS INDUSTRY ‘ KEY PERFORMANCE INDICATORS - KPI expert performer and designer.

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

* Stand watch and fire boilers kept logs, made reports as required.

Fully qualified Diesel Mechanic. NVQ Level 3 in Heavy & Light Commercial Vehicles. HGV C+E Licence. ADR Licence. 13 years experience with Mercedes Benz. Numerous Mercedes Benz Certificates held.

Profile: A qualified Senior Geological Observer who has gained over 15 years experience in offshore basin analysis, subsurface analysis and diamond exploration with De Beers Marine, the company leading the search for offshore diamonds in the world.

Total of 7 years Experience. I am familiar with all kinds of fire fighting systems and fire detection system and safety equipments in offshore.

Develop, implement, supervised and monitor continual safety and training programs. Work successfully with client representatives to manage compliance with Loss prevention, Environmental, Project Management and client requirements satisfactorily.

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

Drilling Supervisor - 17 years Drilling Experience - 7 years International Experience - Safe and Efficient

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Hydroblaster

Maintenance in PLC,DRIVES,Instrumentation Field

M.Sc Energy Economics and B.Sc Petroleum Engineering. Currently working as a Petroleum Economist, have a cumulation of 7 years in the Oil and Gas industry, 3 years + in the Upstream sector and 4 years in the Downstream Sector. Strong spreadsheet skills and intermediate level PEEP user.

Lead Instrumentation Technician

Free! Qualifications - 500 Ton Master Oceans Inspected- 1600 Ton Master Fishing Vessels Oceans - 3000 ITC Master Fishing Vessels Oceans - Able Bodied Seaman Unlimited -ARPA STCW Certified HazWoper TWIC

Pipe Fitter, Foreman, General Foreman.

Prepare all tools for next program,such as Bit.Bit Sub.Cross Over.DC.DP.Slips.Casing.Etc. maintenace and stored back properly.Watch all Equipment work properly and if something we don't expect occure I have to fix it or mentioned it to autorizhed person.Give hand to driller and manage all crew.

11 years of heavy equipment operation and supervisory experience

I am a qualified Heavy Duty Vehicles driver, Crane Operator as well as a mechanic. I have a vast eperience of 21 years in managing heavy equipments including cranes, Trucks, Trawlers and Bull-Dozers. I had been working working as a workshop incharge in UAE Armed Forces.

experience for 20yrs in electronic instrumentation, telecommunication , fire and gas, and electronics

5 years of experience as a instrument technician in oil and gas process plant

Experienced Directional Drilling Consultant

I am a surveyor looking for a rewarding job.

30 years experience in the industry and a seasoned expat, last position held was the turnover coordinator for the Washington Group in Northern Alberta, Canada. Also spent 4 years in Baku, Azerbaijan as the senior electrical commissioning eng.

Instrument Technician / Qc

20+ yrs experience surface and DTH

Mechanic - desire employment opportunities.

M.Sc Geology + PG Dip in exploration and production of oil & gas+ 3 years exp in mudlogging

Knowledge in operating the electrical equipments

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Technical Author, Trainer, Project Manager

Rigger Certificate, Crane Certificate - experience in handling crane

Experenced equipment mechanic currenty working for a Caterpillar dealer

Process/Operations Engineer, with four years of Refinery (FCC) experience.

Retired from PAF as “Chief Technician”

Certified Welder, Forklift/Crane Operator

Laboratory Techniques, computing skill, creativity, communication skill.....

Aviation expert with 21 years in the maintenace arena. Track record of increasing productivity, improving quality while reducing cost and meeting customer needs. Skilled in scheduling, supervising &evaluating over 50 personnel. Successful in developing & executing operational policies and procedures

Professional in Quality and HSE

Heavy equipment operator

Crane specialist. Heavy duty mechanic, mobile crane operator, trade licences. Towercrane ticket, and presently apprenticing as milwright to further my skills. Operate and repair many makes models of hoisting equipment. Rigging, inspection, supervision skills + more 20yrs exp with industry leaders

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out