Resume - I have 12 yrs cementing experince in UK and worldwide with the same company work...

Misco Jobs

Resume #88353

CONTACT INFORMATION:
View contact information...

PROFILE.
A flexible, adaptable and reliable person with supervisory skills in the Oil and Gas industry. Have a practical approach to work. Always likes a challenge and appreciates a job well done.

HISTORY
September 85' - January 93'
I was in the British army for 8 years has an Infantry soldier. I served around the world in different locations and also Northern Ireland for 2 ½ YEARS.

February 93' - February 94'
I was employed by Ellis and Everard. This company was based in Nottingham, Nottinghamshire, England. I dealt with driving and transporting chemicals to different customer locations. I had my ADR, forklift, and HGV 2 license to do this job

February 94' - March 96'
I was employed by Atlas Haulage Ltd. This company was based in Chesterfield, Derbyshire, England. I was employed to drive different HGV 1&2 vehicles all over the UK and Europe carrying various different items to different customers.

March 96' - November 97'
I joined an agency called Sawley Industrial. This agency dealt with HGV 1&2 drivers.
I dealt with a various amount of companies that wanted my services has an agency driver. I drove different types of HGV's and travelled all over the UK and Europe.

November 97' - December 00'
I was employed with BJ Services UK LTD. They where based in Tuxford, Newark, Nottinghamshire, England. I joined the company has an Equipment Operator 1.
While I was in Tuxford I learnt how to run cement bulk plant and cement bulk trucks which carry the cement to customer locations. After 6months I was learnt how to use the mobile cement truck. This system was called JET MIXING. I learnt how to do all the necessary paperwork that goes with the job. After 2years I progressed to an Equipment Operator 3 and had enough experience to complete a full cement job, which covers all the calculations and the pre post and post job work.

December 00' - February 01'
I joined an agency called Coiltec. This company employs different personnel for the Oil and gas Industry and is based in Gt. Yarmouth, England. I did not get any work from this agency.

February 01' - October 02'
I re-joined BJ Services UK LTD in Aberdeen, Scotland. I was employed has a Senior Equipment Operator 4(Offshore Cementer). I continued to learn the different aspects of an offshore cementer. I went to several offshore locations doing different cementing jobs. In October 2002 I was promoted to Service Supervisor 1.

October 02' – November 04
I have gained a lot of supervisory skills.
I have a good understanding of the H.S. & E offshore and participate in the STOP programs that are in place on all the different locations. I have done several permit to work programs. I have worked for Shell, B.P, CNR, Kerr McGee, Enterprise Oil and Nexen.
I have got reasonable computer skills.

November 04' – August 05
On November 16th I transferred to BJ Baku, Azerbaijan.
I have been working on an ACC II unit on land rigs for a company called Karasu Operating Company. I have the responsibilities of looking after all the cement equipment and equipment operators. My role also includes all the pre and post job paperwork and liaises with the company rep.

August 05' – June 06'
I transferred back to BJ Services UK LTD. I was promoted to Service Supervisor 2.
I was sent to work for Nexen and Kerr McGee on the Semi-submersible RIG JOHN SHAW on rotation 2weeks on/2weeks off. The equipment was a 35-8-5 ACC II RAM unit.

June 06' – May 07
I was promoted to Senior Service Supervisor.
I have been working for Nexen, Kerr McGee, CNR, and Lundin on several different oilrigs. I work with Halliburton, Dowell and BJ cementing equipment. On different rotation periods.

May 07 – Present
I left BJ Services Ltd on 4th May 07. I started a new job with Roemex Ltd as a Well Bore Clean up Engineer. My job includes supervising the cleaning of the well, mixing the required chemicals. My main responsibility is to make sure the well is cleaned to the correct specification. Also to follow the correct procedures for collecting and testing samples of chemical and completion fluid to a particular specification of the operating company. Also to complete the correct paperwork and all relevant equipment and samples are returned onshore.

DUTIES AND RESPONSIBILTIES
* Responsible for health and safety.
Ÿ Supervisory and training to operators.
Ÿ Writing reports and service tickets.
Ÿ Implementation of all HSE procedures.
Ÿ Responsible for the maintenance of all equipment.

EDUCATION AND TRAINING

June 80' - July 85'
I was in the Dukeries Comprehensive School, New Ollerton, Mansfield, Nottinghamshire, England. My subjects were Math's CSE grade 3,
English CSE grade 3, Biology CSE grade 3, and Home Economics CSE grade 2.

September 85' - January 93'
Infantry soldier. I served in Northern Ireland for 2 ½ Years. I did two tours of Cyprus.
I did 2years on home defense. I did 6months in the Falkland Islands on peace tour.

January 93' - February 93'
I learnt how to drive a HGV 2 truck.

January 96' - February 96'
I learnt how to drive a HGV 1 truck.

April 98'
Basic Cementing level 2 course in Aberdeen. This course covers basic calculations and formulas.

November 01'
Cement Level 1 (Engineering Handbook). This course covers all the aspects that detailed in the BJ Engineering Handbook.

January 02' - February 02'
I went to the Houston, USA to do the following courses:
Offshore Skid Maintenance Operation 1 to 3. This covers all the aspects of the BJ 35-8-5 ACC unit and the maintenance program.
Offshore cementing level 3 (Advance cementing). This covers the complicated part of cementing including squeeze jobs and absolute volumes.

January 03'
I completed the downhole tool course in Aberdeen. This course covers the different type of packers, bridge plugs, and cement retainers.

January 04'
I completed a Leadership Safety Excellence course in Aberdeen.

June 04'
I completed a STOP awareness course.

May 07'
I Completed the Pan European Offshore Survival Course.

THE ABOVE COURSES COME WITH CERTIFICATES.
ALSO I HAVE FULL SVQ FOR PUMPING AND DOWNHOLE TOOLS.

HOBBIES AND INTERESTS
I am a very active person and like to keep myself busy. I like to do DIY at home.
I like to go swimming and occasionally go to the gym.

ADDITIONAL INFORMATION
I am a non-smoker and in good health.
With my current work I keep quite fit.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 1485)

Go to Search Parameters...

Brief Description

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Crane Operator/Deck Foreman, Level III, HLO, Supervisor, Safety Rep

I am looking to expand my knowledge and experience in the oil and gas industry, I have 5 years exp. as a well service floorhand and relief derrick hand. I am interested in Offshore drilling or related jobs.

I am looking for entry level offshore work.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

I would like to find a diversified employment opportunity where I can continue to learn and grow in both the drilling and completion/work over aspects of the oilfield.

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Looking to obtain Employment in the Oil & gas indusrty

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

I have 12 yrs cementing experince in UK and worldwide with the same company working with different Oil companies. I also have well-bore cleaning experince for 2 years. I have dealt with Mud, brines and different cemeting fluids.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

11 Years experience in oilfield

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Performing the day-to-day maintenance activities of the oil and gas plants in coordination with DCS Technicians and Sr technicians.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Sales, Engineering Project Manager

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Sir,I have about 18 years of experience in operation of various Chemical plants, oil refineries and oil and gas gathering stations in India and Arabian Gulf Onshore and Offshore. I am also having experience of operation on Modern DCS belonging to HONEY WELL TDC 3000 of USA, CENTUM of YOKO GAWA

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

I have more than 5 year of experience under valve manufacturing company.I worked with gate, globe, ball, NRV valves mostly with forged steel, cast steel, and stainless steel. But I have a experience of manual valve only.

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Pipefitter with supervisory and training facilitator experience

A professional LNG Technician/Engineer is looking for a position where his skills and education will add value to operations.

I have been in the oil and gas industry for the last 24 years. I have been in maintenance as a Supervisor and in Operations as a Supervisor. I am presently an Offshore Installation Manager (OIM)

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out