Resume - QualificationsI have worked in the repair related field for over 23 years. I own...

Misco Jobs

Resume #9059

CONTACT INFORMATION:
View contact information...

Objective
I would like to obtain a position working in the international market place as a mechanic or a working supervisor doing fleet maintenance, generator repair or heavy equipment repair.

Qualifications
I have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business. I worked in the shop as well as in field repairs. I have worked up on the North Slope in Alaska's oil fields doing on site repairs as well as many other sites around Alaska. I am up to date with the use of the latest diagnostic equipment scan tools and lab scopes. I have used M.P.S.I., SNAPON and O.T.C. scanners doing on board computer repairs. I have done all types of electrical repairs and extensive wiring. I am a self starter and work well without supervision. I am very accustomed to working long hours each day and working until my task is completed. I am a very good problem solver and work well under stressful conditions with others. I worked in a Kuwait in a D.S. maintenance shop for K.B.R. until March of 2004. I then transferred to Iraq to to work in the generator dept. in at Babylon. In April I was made a Forman and was then promoted to acting supervisor for all the coalition sites in June. I in this position was required to aid all the mechanics of the other sites in the repairing and the maintenance all generators as well as the ordering of required parts.

Education
I completed high school then attended Denver Institute of technology in Denver Colorado. This was a two year trade school. It was a gas and diesel technology course with heavy electrical classes. I then attended the University of Alaska; there I took many general education classes with a emphasis in math and science. I have taken numerous trade classes in computer diagnostic, air-conditioning, and fuel injection repairs as well as the use of lab scopes and scan tools. Each year I would try to take 3-5 classes in order to stay current.

Relevant Experience
I have worked as a mechanic for over 23 years. I have worked in both heavy equipment repair as well as more complicated fuel injected computer controlled systems. I have lived and worked In many remote parts of Alaska as well as Iraq and Kuwait and fully know what to expect while working in remote locations as well as other countries. I have spent a great deal on my working time a lead person at my job and have no problem interacting with others.

Work history
2-01-04 to present I went to work for KBR in Kuwait in a D.S. maintenance unit for the United States Army working on light to heavy wheeled vehicles. I did electrical repairs motor installs transmission replacements, fuel injection repairs and on board computer repairs. I was transferred to Iraq at the end of March and at that time I went to work in the generator dept as a mechanic/Forman. I maintained and repaired generators in the range of 5 kw up to 1250 kw prime power units. I order all the required parts for the dept as well as new generators. I set up a maintenance program for all seven sites in the coalition sector and assist in repairs at other locations if the mechanic at that location is unable to complete the required repair. We work on Perkins,Volvo, Cats and Cummins diesels generators.

10-01-91 to 1-31-04 I worked and owned Palmer Repair. I did light and heavy line repair work. I did all types of repairs to include fuel injection, motor replacement, transmission replacement, electrical repairs, and computer systems repairs. I worked on both gas and diesel engines minor and major repairs. I was I.M. certified to test and repair emission systems as well as air-condition repairs. I reprogrammed computers on late model trucks and cars to include both gas and diesel vehicles. I also worked on a variety of different equipment to include generators, and tractors. I have extensive experience with the use of lab scopes in the commission of derivability repairs to include power stroke diesels, 6.5 international diesels, and other manufactures to include Chevy, Dodge, Ford, and International.

02-15-89 to 9-15-91 I worked at R&R Repair in Alaska. I did all types of general repairs on both gas and diesel engines. I did all types of heating and air condition repairs. I did I.M. testing and repairs which includes fuel injection, computer diagnoses and electrical repairs. Most of the work at this shop was light line with a few transmissions and engine overhauls.

Personal information
I am 42 years of age and in very good health. I am single with no children. I like to travel, I do not smoke or use drugs of any kind.

Reference:
Will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 1485)

Go to Search Parameters...

Brief Description

Worked service rigs for 2.5 years

Instrument technician

Versatile, knowledgeable, exploration geologist

An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm

Account Management. Contract negotiation with clients, proposal preparation and follow up. Market analysis and account development identifying prospective customer needs and developing innovative solutions to satisfy their requirements

Highlights of Qualifications: Diploma in Electrical Engineering from Maharaja Sayajirao University of Baroda, Gujarat, India. Registered license holder of Industrial Electrician from Ministry of Training colleges and University, Ontario, Canada (Licenced 442A), Applied for C.E.T. certification to OC

Scaffolding & Safety

Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.

Instrument Technician with 19 years experience, trade and some college. Computer literate. Can do any of maintenance, planning, construction, installation, supervision, pre-commissioning, QC, calibration, documentation, faultfinding, wiring, loop checks, and more.

There are three distinct areas to my trade & training in the R.A.F, Mechanical, electrical and corosion fault finding.

Total Experience of Eighteen, encompassing as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

To find a position where I can improve my pick, packing, Inwards goods, Despatch skills and operate as an effective team member to bring Success to myself and my team.

Oilfield Electronics/Instrumentation technician; excellent troubleshooting skills, analytical, hardworking, willing to learn new skills.

Heavy Lift / Rigging Superintendent, Rigging Engineer, Rigging Supervisor

Work well with others, Willing to become a leader, Able run Electrical Tools

Operation Manager for Corrosion Engineer & Inspector

My career within the Oil and Gas Industry has enabled me to develop experience in dealing with and handling clients, market research, project development, and maintaining business relations. Initially working in instrumentation, followed by process engineering.

Coiled Tubing Supervisor

Experienced Offshore Rigger

I have been working in the Petro-Chemical Busines for 25 +years( construction and maintenance.) I 've been a Supervisor, Superintendent & Project Manager. Heavy expirence in Piping ,Fabrication, Rigging, I have with all disciplines.I have worked in the U.S. and abroad.

Directional Driller w/ 13 years experience

Mechanical commissioning Engineer. HNC & ONC Mechanical Engineering. Experienced Project Manager,Supervisor and Technical Engineer.

Seeking a challenging position as a diesel technician and/or service technician in the Oil Field Services industry or other industries that require my technical and mechanical skills. To obtain more knowledge and room for advancement in this field, while working with a team that will continue to ch

Hold a valid Class 3 Singapore Driving licence, Hold a valid STCW 95 VI/1 Basic Safety Training for Fire Prevention and Fire Fighting, Fluent in written and spoken English, Proficient in Microsoft Office

Heavy Equipment operator/ Supervisor ready for a new challange

Crane Operator, worked offshore for 8 years. Qualifications include HLO, Rigging, First Aid, etc. I am confident & reliable with a flexible outlook to my work & a strong commitment to safe work practices. Extensive travel has given me the ability to develop a good rapour with local people

Refer below

"External foreign trade", English, French, native Russian, Norwegian, Business Correspondence, 2 years experience, advanced PC user, typewriting, purposeful.

•BSc in Engineering with 8 years of experience in Oil & Gas EPC and Communications industry. •Field support and Loop test coordinator for Petro-Canada RCP project site in Canada. •Excellent interface abilities with client/vendor management teams •Experience in preparing as-built data sheets, ins

I have multiple abilities varying on the job at hand. I have a high intelligence, combined with mechanical aptitude, it is easy to learn virtually anything. The ability to be sincere and read both vocal and body language helps me to communicate with the people I meet.

Offshore Production Operations & Offshore Construction Operations

Mechanical maintenance equipment of all types

Seeking for a position for a Ordinary Seaman where my skills, knowledge, training, and great work experience can help improve your company.

JIB

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

I have 8 years of mechanical/electrical maintenance in heavy industrial settings.

Qualified and Certified NCCCO Operator with all endorsements willing to travel

In-House/Field Landman/DOA/Lease Analyst/ROW Agent/Acquisitions-Divestitures

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

Completed grade 12 diploma, 2 months experience construction(framing), 2 months experience welding with aluminum, 9 months experience working at local Chevrolet dealership(oil changes, tire repaires, basic maintenence duties)

Experience on Natural Gas Drilling Rig

Qualified heavy diesel machanic

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

6G Coded Pipe Welder T.I.G.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Degree of Bachelor of Computer and Communication Engineering, and computer literate in windows and microsoft.

Oilfield Managment / Technical Advisor / Sales / Light Well Intervention Engineering

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out