Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #1865 next resume »»
CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

PERSONAL DETAILS

DATE OF BIRTH : 1st October 1966

NATIONALITY : Permanent Resident of Canada

LANGUAGES : Bangla (Bengali) - Mother Tongue
English - Fluent in Speaking and Writing.

Objective- To contributes and expands my knowledge of Physical, Inorganic, Analytical, Environmental Chemistry, Environmental Geochemistry and Mineralogy and Physics, Solid State and Condensed Matter Physics, Material Sciences, Synchrotron Radiation, Surface Sciences (UHV), Optical, Semi conducting Interface, Thin Films and Microscopic Physics, Polymer Physics and Chemistry through research and teaching.

PRESENT OCCUPATION
November 2001 - Present

Post Doctoral Research Scientist supervised by Prof. Dr. E. D. Crozier on Environmental Project (Floc, Oyster, Sand and Sediments (Fe, Mg, Si, Pb, Mn, Zn and Cd)) at the Department of Physics, University of Simon Fraser, Burnaby, BC V5A 1S6, Canada. Specially this work is involved in characterization of metals in the Floc, Sand and Sediments from Boundary Bay beach, BC in Canada by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) at the Department of Physics, Simon Fraser University and Fluorescence Spectroscopy, EXAFS (Extended X-ray Absorption Fine Structure) and NEXAFS (XANES (X-ray Absorption Near Edge Structure)) at the Advance Photon Source, (USA National Synchrotron Radiation Center), PNC-CAT, Argonne National Laboratory, Chicago, Illinois, USA.
QUALIFICATIONS:

1992-1996

Ph.D. (Doctor of Philosophy), Department of Chemistry, University of Manchester Institute of Science and Technology (UMIST), Manchester, UK.

Title of Thesis: Surface Chemistry of High Temperature Superconducting Oxides, Specially, this has been involved in the synthesis and characterization of a range of ceramic in the Bi2Sr2Ca1-xYxCu2O8+? (x = 0-1.0) system. Samples characterization techniques were SEM, EDAX, XRD, VSM carried out at the Department of Chemistry, University of Manchester Institute of Science and Technology (UMIST), Manchester and UHV resonant photoemissions, EXFAS and XANES at Synchrotron Radiation Source (SRS) CRCL, Daresbury Laboratory, Warrington, Cheshire, UK

1991-1992

M. Sc. (By Research), Department of Chemistry, University of Manchester Institute of Science and Technology (UMIST), Manchester, UK.

Title of Thesis: Surface Chemistry of High Temperature Superconducting Oxides. Specially, this has been also involved in the synthesis and characterization of a range of ceramic in the Bi2Sr2Ca1-xYxCu2O8+? (x = 0-1.0) system. Samples characterization techniques were SEM, EDAX, XRD, VSM and UHV XPS at the Department of Chemistry, University of Manchester Institute of Science and Technology (UMIST), Manchester, UK.

WORK EXPERIENCES

November 2000 - October 2001

Position: Post Doctoral Research Scientist

Supervisor: Prof. Dr. G. A Sawatzky and Prof. Dr. H.T. Jonkman

Address: Department of Solid State Physics
University of Groningen

Project: Investigation of Oligo Polymer (Polythiopenes), C60 and other Organic Materials. Especially this was involved on deposition and characterization of Oligo Polymers.

Characterization Techniques: Scanning Tunneling Microscopy (STM), Atomic Force Microscopy (UHV) and Optical Absorption Spectroscopy

January 2000 - October 2000

Position: Post Doctoral Research Fellow

Supervisor: Prof. R. Szargan

Address: Wilhelm-Ostwald-Institut of Physical and Theoretical Chemistry
Department of Chemistry & Mineralogy

Project: Investigation of Semiconductor interface. Especially this was involved on the deposition of epitaxial ZnS layers on GaP substrates and layer preparation technology (ESCALAB).

Characterization Techniques: XPS, UPS, LEED, STM, XES and AFM at the Wilhelm-Ostwald-Institut of Physical and Theoretical Chemistry, Leipzig and BESSY II (Berlin Electron Storage Ring Company for Synchrotron Radiation) in Berlin, Germany.

1997-1999

Position: Post Doctoral Research Associate

Supervisor: Prof. H. C. Ku

Address: Department of Physics
National Tsing Hua University
Hsinchu, Taiwan
Republic of China

Project: Synthesis and Physical Properties of New Superconducting / Magnetic System, Especially, this had been involved the synthesis of the growing single crystal and poly crystal (Bi2Sr2Ca1-xRxCu2O8+d (R= Pr, Gd and Y doped) and Bi-doped Gd2-xBixCuO4 Cuprates) by Self Flux and Travelling Solvent Floating Zone (TSFZ) methods.

Characterization Techniques: SQUIDS, XRD, EDAX, SEM at the Department of Physics, National Tsing Hua University, and at the Synchrotron Radiation Research Center (e.g. EXAFS, XANES and Angle Resolved Photoemission (ARUPS) Techniques) in Taiwan, Republic of China

1996-1997

Position: Post Doctoral Research Associate

Supervisor: Prof. T. J. Chuang

Address: Synchrotron Radiation Research Center (SRRC)
Science-Based Industrial Park, Hsinchu
And Institute of Atomic Molecular Sciences (IAMS)
Academia Sinica, Taipei
Taiwan, Republic of China.

Project: Design and Construct the beam line of Synchrotronised Soft X-ray Scanning Photoemission Spectromicroscopy (PESM). Especially this was involved design and constructs the beam line for X-ray photoemission microscopy (PEMS) and with the combination of XPS, UPS, AES, STM and AFM techniques for analysis of semiconductors, metals and metal clusters (No experiments were carried out during this project).

1992-1996

Position: Post Graduate Research Student for Ph. D. degree.

Supervisor: Prof. Dr. W. R. Flavell (Ex Reader in Chemistry, Presently Prof. of Physics)

Address: Department of Chemistry
University of Manchester Institute of Science and Technology (UMIST)

Project: Surface Chemistry of High Temperature Superconducting Oxides. Specially, this has been involved the synthesis and characterization of a range of ceramic in the Bi2Sr2Ca1-xYxCu2O8+? (x = 0-1.0) system.

Characterization Techniques: SEM, EDAX, XRD, VSM at the Department of Chemistry, University of Manchester Institute of Science and Technology (UMIST), Manchester and UHV resonant photoemissions, EXFAS and XANES at Synchrotron Radiation Source (SRS) CRCL, Daresbury Laboratory, Warrington, Cheshire, UK.

1991-1992

Position: Post Graduate Research Student for M. Sc. (By Research) degree

Supervisor: Prof. Dr. W. R. Flavell (Ex Reader in Chemistry, Presently Prof. of Physics)

Address: Department of Chemistry
University of Manchester Institute of Science and Technology (UMIST)

Project: Surface Chemistry of High Temperature Superconducting Oxides. Specially, this has been also involved the synthesis and characterization of a range of ceramic in the Bi2Sr2Ca1-xYxCu2O8+? (x = 0-1.0) system.

Characterization Techniques: SEM, EDAX, XRD, VSM and UHV XPS at the Department of Chemistry, University of Manchester Institute of Science and Technology (UMIST), Manchester, UK.

1992-1996

Position: Lab. Demonstrator (Part-time)

Address: Department of Chemistry
University of Manchester Institute of Science and Technology (UMIST)

Responsibility: To the Supervising the Experiments of Post Graduate (M. Sc. Course) Students.

1992-1996

Part-time waiter, Kailash Indian and Nepalese Restaurant, Charlton Street, Manchester, UK.

March 2002 - Present:

Sales Representative (Part-time), Great Northern Security, ADT Authorized Local Dealer, North Vancouver, British Columbia Canada.

Computer Experiences:

I have used Personal Computer and Macintosh (especially Microsoft word 95, 97, 98 and 2000, XP and Millennium window):

For Personal Computer:

1. AutoCAD 13 and 14, TOPDRAW (For Design)
2. Microsoft Excel 5.0 (Data Analysis)
3. Microsoft Power Point and Presentation (For Presentation)
4. Origin 4.1, 5.0, and 6.1 (Data Analysis)
5. Unifit 3.1 (Data Analysis),
6. Netscape, Internet, Telnet
7. Photo-Paint (For Presentation)
8. Corel Draw and Corel Photo Paint 7, 8, 9, 10 (For Presentation)
9. Eudora,
10. EXCURVE92 and 98 (For Data Analysis)
11. APL (Computer Language)
12. WinXAS 2002 (Data Analysis)
13. PCW (Crystal Determination)
14. Feef7, 8 for EXAFS data Analysis
15. C++, Java and Visual Basic (Computer Languages)
16. Principal Component Analysis (PCA).

Macintosh Computer (Mac Power) (especially Microsoft word 95, 98 and 2000)

1. Aldus (For Drawing)
2. Chemdraw (For Drawing)
3. Igor (For Graphing and Data Analysis)
4. MacDraw (For Drawing)
5. Super paint (For Drawing)
6. Kaildagraph (For Data Analysis)
7. Cricket graph and etc. (For Data Analysis and Graphing)

Extensively and have operational expertise (instrumental set up) in analysis technique of surface science and solid state chemistry (e.g. SQUIDS, SEM, EDAX, XRD, VSM and other UHV (XPS) techniques) and design and construct for the PESM and U5 Microscopy Beam Line at SRRC, Taiwan, Republic of China.

I have carried out work at the Synchrotron Radiation Source (SRS) (e.g. X-ray Absorption (EXAFS, NEXAFS or XANES), Resonant Photoemission and Angle Resolved Photoemission) at DRAL, Dares bury, Cheshire, UK and also Synchrotron Radiation Research Center, Taiwan, Republic of China.

I have performed work at BESSY II (Berlin Electron Storage Ring Company for Synchrotron Radiation) in Berlin, Germany, (e.g. UHV X-ray absorption (EXAFS, XANES or NEXAFS, Angular Dependent NEXAFS), X-ray Emission Spectroscopy (XES), X-ray Photoelectron Spectroscopy (XPS) and UPS for Semiconductor Interfaces with Organic and Inorganic Substrates).

I have carried out work at Advance Photon Source, Argonne National Laboratory, Chicago, Illinois, USA (e.g. Fluorescence Spectroscopy, EXAFS, NEXAFS and XANES) to characterization of Metals (Fe, Zn, Mn, Mg, Pb and Cd) in the Floc Sands, Oyster and Sediments.

Experimental Techniques:

UHV and Surface Science Techniques:

1. X-ray Photoelectron Spectroscopy (XPS)
2. X-ray Emission Spectroscopy (XES)
3. Angle Resolved Ultra Photoelectron Spectroscopy (UPS or ARUPS)
4. Lower Electron Energy Diffraction (LEED)
5. X-ray Photoelectron Diffraction (XPD)

Microscopic Techniques:

1. Scanning Electron Spectroscopy (SEM)
2. Transmission Electron Spectroscopy (TEM)
3. Atomic Force Microscopy (AFM)
4. Scanning Tunneling Microscopy (STM)
5. Scanning Probe Microscopy (SPM)

Synchrotron Radiation Techniques:

1. Resonant Photoemission Spectroscopy (RPES)
2. Extended X-ray Absorption Fine Structure (EXAFS)
3. X-ray Absorption Spectroscopy (XAS)
4. Near Edge X-ray Absorption Fine Structure (NEXAFS or XANES)
5. Angle Resolved Ultra Photoemission Spectroscopy (ARUPS)
6. Fluorescence Spectroscopy

Solid State Techniques:

1. X-ray Diffraction (XRD)
2. Energy Dispersive Analysis X-ray (EDAX)
3. X-ray Spectroscopy

Magnetic Measurement Techniques:

1. Superconducting Quantum Interface Devices (SQUIDs)
2. Vibrating Sample Magnetization (VSM)

Optical Techniques:

1. Optical Absorption Spectroscopy (OAS)


Sample Preparations:

1. Solid State Reaction Methods. (Single and Poly Crystal)
2. Solvent Floating Traveling Zone (SFTZ) (Single Crystal)
3. Molecular Beam Epitaxy (MBE) (Thin Films)
4. ESCLAB

Materials:

1. High Temperature Superconductors ((Bi2Sr2Ca1-xRxCu2O8+d (R= Pr, Gd and Y doped)
2. Bi-doped Gd2-xBixCuO4 Cuprates
3. YBCO
4. BaPbBi Superconductor
5. Semiconductor Interfaces (GaP/ZnS, InP/CdS and InP/PbS)
6. Polymers (Oligo Polymers)
7. Quantum Dots (InP/PbS)
8. Floc and Sediments (Environmental), Oyster (Feces and Guts).

Work in Synchrotron Radiation Centers:

1. CRCL lab. Dares bury, Warrington, Cheshire, UK (1991-1996)
2. Synchrotron Radiation Research Center (SRRC), Hsinchu, Taiwan, R.O.C (1996-1999)
3. Berlin Electron Storage Ring Company for Synchrotron Radiation (BESSY II) (2000)
4. Advance Photon Sources (APS), Chicago, USA (2001-Until Present).

LIST OF PUBLICATIONS

1. Surface Chemistry of High Temperature Superconducting Oxides.
M. M. Sarker, M. Sc. Thesis, University of Manchester Institute of Science and Technology (UMIST), Manchester, UK, 1992.

2. Surface electronic structure of complex B-metal perovskites.
W.R. Flavell, D.R.C Hoad, M. Mian, B.C. Morris, A.J. Roberts, M. M. Sarker, P.L. Wincott, D. Teehan and P. Bailey, DRAL Annual reports 1993/94

3. Photoemission study of the electronic structure of BaPb1-xBixO3.
W.R. Flavell, D.R.C Hoad, M. Mian, B. C. Morris, A.J. Roberts, M. M. Sarker, P. L. Wincott, D. Teehan, D. S. Law and Changkang Chen, Physics C, 235-240, (1994), pp 1041-1042.

4. Surface electronic structure of complex B-metal perovskites.
W.R. Flavell, D.R.C Hoad, M. Mian, B. C. Morris, A.J. Roberts, M. M. Sarker, P. L. Wincott, D. Teehan, and P. Bailey, Surface Science, 307-309, (1994), pp1166-1171...

5. Metal-to-non-metal transitions in complex oxides.
W.R. Falvell, A.G. Thomas, M. M. Sarker, M. Mian, J.F. Howlett, H.R Aghabozorg, Z. Hashim, S. Squire, J. Hollingworth, S. Warren, P.L. Wincott, L. Leonyuk, D. Teehan, S. Downes and K.C. Cheung, DRAL Annual reports 1994/95.

6. Resonant Photoemission from complex cuprates and nickelates.
W.R. Flavell, J. Hollingworth, J.F. Howlett, A.G. Thomas, M. M. Sarker, S. Squire, Z. Hasim, M. Mian, P. L. Wincott, D. Teehan, S. Downes and F.E. Hancock, The Journal of Synchrotron Radiation, 2, (1995), pp 264-271.

7. Angle-resolved photoemission of Y-doped Bi2Sr2CaCu2O8+x.
W.R. Flavell, A.G. Thomas, S. Squire, M. Mian, M. M. Sarker, J. F. Howlett, Z. Hashim, H.R. Aghabozorg, P.L. Wincott, S. Downes and L. Leonyuk, Surface Science, 352-354, (1996), pp 788-792

8. Surface Chemistry of High Temperature Superconducting Oxides.
M. M. Sarker, Ph. D. Thesis, University of Manchester Institute of Science and Technology (UMIST), Manchester, UK, 1996.

9. Electronic Structure, Reactivity and Solid State Chemistry of La2-xSrxNi1-yFeyO4+?.
J.F. Howlett, W.R. Flavell, A.G. Thomas, J. Hollingworth, S. Warren, Z. Hashim, M. Mian, S. Squire, H. R. Aghabozorg, M. M. Sarker, P.L. Wincott, D. Teehan, S. Downes, D. S-L. Law and F.E. Hancock, Faraday Discuss., 105, (1996), pp337-354.

10. EXAFS Studies of SrSn1-xSbxO3 and BaPb1-xBixO3.
W.R. Falvell, M. Mian, A.J. Roberts, J.F. Howlett, M. M. Sarker, P.L Wincott, R. L. Bilsborrow and Gert van Dorssen, J. Mater. Chem., 7(2), (1997), pp 357-364.

11. Anomalous Magnetic properties of the 2212 type rare earth cuprates Bi2Sr2RCu2O8+? (R= Pr, Gd and Y).
T.I.Hsu, Y.Y. Hsu, J.U. Lin, Y.H. Toh, M. M. Sarker, and H. C. Ku, Proceeding of the 12th Conference on Magnetic and Magnetism Technology, Taiwan, July 1997.

12. Review of Application of High Temperature Superconductors.
M. M. Sarker and W. R. Flavell, J. of Superconductivity, 11, (1998), pp209-211.

12. Magnetic Properties of Bi-doped Gd2-xBixCuO4 Cuprates.
H.C. Ku, H. M. Luo, Y. Y. Hsu, M. M. Sarker and T. J. Lee, J. of Appl. Physics, 85, (1999) pp1-3.

14. XAFS Study Of Iron Oxides In Oyster Digestive Processes
M .M. Sarker, R. A. Gordon, E. D. Crozier, L. Bendell-Young, G. Kruzynski, Advance Photon Sources, Argonne National Laboratory Activity Report 2001.

15. Investigation of Oxidation of a ZnS Deposition on GaP(001) Substrate
M. M. Sarker, A. B. Preobrajenski, K. Grebhardt , T. Chassé and R. Szargan (manuscript in preparation).

References will be provided upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 51 to 100 of 1352)Go to Search Parameters...
Brief Description
Exploration geophysicist with 26 years experience in both exploration and development prospect generation. Major strength in 2D, 3D depth imaging, seismic interpretation, integration, and team management. Excellent communication and presentation skills.
Highly technical sales experience with a history in government as well as emerging technologies. I am fluent in several languages, but conversational in many others. I am looking for a company that will not mind that I am located in Austin, TX and do not wish to re-located at this time.
Ph.D. in Geophysics (2005), C++, Fortran developer, geomodeller, processor. 5 years of industrial experience, 10 years in academy - geophysics and applied mathematics.
Experienced In Construction & Commissioning Of Oil & Gas/ Petrochemical/ Refinery/ Fertilizer And Power Projects Both In Offshore & Onshore.
Senior Geologist 16+ years experience, small and large companies, exploration, A&D member of professional body.
Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India
About 11 Years Experiece working in the Oil and Gas Sector as Document Controller/Turnover Document Controller/Turnover Engineer. I have worked for some of the reputed multinational Constrcution Companies like Chiyoda, Foster Wheeler and Toyo.
Occupational Health Specialist / Emergency Medical Doctor / Physician
Experienced Occupational Health Physician with MOH (UAE) certification and a wide range of hands-on exposure in industrial and hospital set up. Proven healthcare skills, excellent interpersonal & IT skills & experience of working effectively with a wide range of people. Able to manage & motivate.
Working capacity, dedicated to respect program and to act in the benefit of the Company. Language skills. Experience 6 years in Mangistau region. Worked with local people. Contacts with several Companies ( BJ, Baker Oil tools, Baker Hughes, Weatherford, Baker Atlas, MI, etc).
Skills and Work Experiences
Qualified electrician; award for best driver over 7yrs avrage 45000km a year at eskom
Experienced Operations Geologist, with some play generation experience, M.Sc. level education, familiar with LWD/MWD logging and all petrophysical tools. Well versed in report generation, well supervision/monitoring and well able to QC and convey all relevant drilling and geological data.
Free! Senior Procurement Advisor with 25 Years Experience in Purchasing / Expediting / Logistics /
Hse Engineer, I have a total of 10 years of exp in drilling fields
Seeking a challenging career with a progressive organization which will utilize my skills, abilities, education in Geology and working experience (10 plus years) in Oil and Natural gas exploration.
Free! a person of unusual dedication, efficiency and drive. With my vast experience in the oil industry, I know I can contribute to your company.
Over 32 years experience as a Geotech in the oil and gas industry using many different programs to assist Geologists and Geophysicists for data retrieval, loading and map generating for all types of data except seismic.
Registered Nurse, more than 15 years experience. looking for medic job in offshore industry. highly experienced in emergency care, Trauma management, Advanced life support, and general medical treatment of employees.
Environmental Health and Safety Consultant with overseas experience and extensive background in plant constructions, plant pre-commissioning and commissioning projects, plant expansions, major repairs, routine maintenance in refinery complexes, upgraders gas complexes and power plants.
FROSIO Certificate level 3. 28 years experience in oil & gas industry as coating/insulation inspector
Sale and marketing experiences.
IBM-Maximo Senior Consultant , Oracle eAM & ERP Consultant
21 Years Onshore and Offshore experience in the through knowledge in Welding and painting Heat treatment, hardness and NDT testing, Hydro testing of process piping in various construction projects and industries the Refinery projects Gas and oil separation project, Gas power and desalination plan
Over 17 years experience in Production & Planning Control. We r undertaking 250 shop floors.Currently I am working Manager in Europlastics-Malaysia.
Overall I have 19 years of experience in the field of Project Management, Administration, Secretarial, Document Control, Personnel and Procurement. For the last twelve (12) years I am working with Saudi Aramco and Petrokemya?s various GAS EPC projects.
My skills are developing training plans & tracking using SAP, managing training records, training technicians developing CBT modules. Creating operating procedures, training modules. Word proc & Tech writing, Power Point, Outlook, Excel, SAP, Front Page. Inc/Acc Invest, TDC3000 & DCS operating, SWP
Bachelor of Engineering in Instrumentation Technology working as DCS Engineer with 13 + years experience
Accountant , invoicing good literacy computer
Sr. Interpretation Geophysicist w/exploration & reservoir development experience
18 YEARS AS SAFETY SUPERVISOR IN IAF, 02 YEARS AS A WORK SAFETY MANAGER,06 MONTHS AS A SAFETY OFFICER
Open-Hole / Cased-Hole Well Log Analysis - Clastics and Carbonates
I have worked for multinational oil companies in Supply Chain Activities. BP Exploration Colombia: 7 Years and Exxon Mobil in Colombia: 25 years. My areas of expertise: Purchasing and Contracting, logistics and inventory Management.
Twenty-four years experience in onshore and offshore oil and gas law, land management and land services, including titles, contracts, acquisitions and divestitures, due diligence, litigation support, legislative review, environmental and regulatory issues and management of land personnel.
I am a QHSE individual but can crossover to other areas. The resume covers my international experience and gives information on my skills.
Expert Mediator and Problem-Solver
I'm a graduate of Bachelor of Science in Accountancy, class of 1996, at Polytechnic University of the Philippines, gained total of 12 years experience in Accounting with a combination of Administrative task.
Use my skills and experience for your mission critical UNIX Infrastructure
I am interested in helping to improve the workplace morale of oil rig workers by conducting highly interactive and motivational workshops.
International Geophysicist with over 23 years experience in all facets of petroleum exploration, created and promoted prospects through use of seismic and well data. Expertise in use of Geoquest and LandMark geophysical software, experience in both 2D and 3D data acquisition and processing.
20+ years in oil industry with extensive international exposure. Most part in drilling rigs management, but also human resource management, general management and more recently a training coordinator and Instructor for well engineers.
A material analyst with a strong ability to plan and execute build schedules that support material requirements and maintain manageable inventory target levels. Develops and manages the inbound and outbound flow of materials and parts.
To obtain long-term employment with an organization that will allow me to utilize my sales, management, and organizational skills in order to achieve company objectives. An honest approach that has resulted in exceeding set goals in the petroleum industry for the past 22 years.
Environmental professional with a solid background and experience in environmental projects and permits under CERCLA, RCRA, OSHA, FERC, NESHAP, CAA, and CWA regulations. A highly motivated project manager and effective communicator.
Chemical Engineer with 15 years of Safety, Environmental, & Transportation regulatory experience in oil, gas processing, chemical distribution, and trucking industries, including design, construction, operations and policy and procedure development compliant with regulatory requirements.
Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering
Geologist graduated at University of La Plata, Argentina. Mudlogger at Exlog, data Engineer at Exlog/Baker Hughes Inteq, Argentina. Mudlogging Coordinator at Baker Hughes Inteq, Argentina. Ops. Manager at Datalog, Argentina. Wellsite Geologist in Argentina and Venezuela.
“To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working”
I am Chemical engineer backed by MBA with 15 years of proven track record in the field of marketing & sales of specialty chemicals to wide range of industries. I have worked for & trained with some of the largest multinational chemical companies.
Twenty-two years in geologic research and preparation of reports on coal and coalbed methane resources in Virginia. Experienced geologic mapper. Microsoft Programs, Earth Vision, Arcview GIS 3.2, ARC/INFO, SPSS, and Adobe PageMaker. published.
1   [ 2 ]   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27  
Seach Parameters

Change search parameters...
CATEGORIES: Other;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com