Resume - I have vast experience in pipeline engineering & integrity involving smart pig, ...

Misco Jobs

Resume #26303

CONTACT INFORMATION:
View contact information...

Qualifications
M.Tech (Chemical Engineering), Rivers State University of Science & Technology, Port Harcourt. Nigeria. 2002.
B.Tech (Chemical/Petrochemical. Engineering), Rivers State University of Science and Technology Port Harcourt. Nigeria. 1998.
National Diploma in Production Metallurgy, Federal Polytechnic, Idah., Nigeria. 1986
Member, Professional Pipeliners Association of Nigeria (PLAN).
Senior Member, National Association of Corrosion Engineers (NACE) International, USA.

Certifications:
a) Welding Inspector (CSWIP 3.0), The Welding Institute (TWI), Cambridge, UK.
b) Enhanced Contract Management Course (Module 1), SPDC, Nigeria.
c) Pipeline Pigging & Maintenance Course, SPDC, Nigeria.
d) HSE Level 3 Competency Course, NISP, Nigeria.
e) Advanced HSE Course, NISP, Nigeria.
f) American Society for Non Destructive Testing (ASNT) Level II on Magnetic Particle Testing (MT).
g) American Society for Non Destructive Testing (ASNT) Level II on Liquid Penetration Testing (PT).
h) American Society for Non Destructive Testing (ASNT) Level II on Ultrasonic Testing (UT).
i) American Society for Non Destructive Testing (ASNT) Level II Radiographic Film Interpretation (RFI).
j) Certificate of Competence in Practical Visual Inspection of Welds, TWI, Cambridge, UK.

Background
I amassed 16 years of experience working as contract staff for the Shell Group and Chevron Group in Nigeria, where I completed my Shell career as Project Engineer (static equipment maintenance) and Inspection Engineer in Shell E&P Company in June 1997/ March 2007 respectively.
An experienced, diligent and meticulous engineer with excellent Surface Engineering and Project Management capability. My attitude to work is a challenge seeking one with the ability to motivate and influence others.
16 years of experience in the area of material selection, integrity assessment and corrosion management related technical field in upstream and downstream Oil & Gas industries.

* Selection, review of Material of Construction (MoC) for Oil & Gas handling facilities.
* Design, review of Cathodic Protection (CP) systems and Corrosion Monitoring (CM) facilities for Oil & Gas projects.
* Corrosion Management / Integrity assessment of Oil & Gas upstream and down stream pipelines, piping, flow lines, pressure vessels and storage tanks etc.
* Review of Intelligent Pigging (IP) reports and engineering assessment of identified pipeline defects (Site dig verification) and defect repair.
* Review of material specifications for various equipments used in Oil & Gas handling facilities.
* Monitoring and integrity assessment of cathodic protection (ICCP & SACP) of pipelines, tank farms and offshore structures.
* Selection and performance evaluation of corrosion inhibitors /biocides for Oil & Gas equipment application.
* Inspection and testing of static equipment such as heat exchangers, pressure vessels, columns, storage tanks, pipelines, piping, relief valves etc.
* Shut down, routine inspection of plant equipment and recommendation of integrity improvement measures.
* Evaluation of WPS, PQR, welder qualification and welding inspection.
* Preparation of inspection procedures, work instructions and local (internal) standards.
* Selection & monitoring of external coating and insulation systems.
* Good knowledge of LNG, LPG, Oil & Gas production technology, storage, services, material selection, corrosion and materials technology.
* Have good experience of working with multinational teams.
*Conducting and managing FEED work scopes including preparation and evaluation of invitations to tender.

Working Experience
Snr. QA/QC Inspector. Moody International, Nigeria. Jan, 09 – Date
Participate as Company representative specialist for TOTAL Nigeria on OCTG inspection and performance testing at Vendor's threading plant. OCTG Inspection of threading/coupling of 10 ¾'', 60.7#, P110, TSH BLUE casings and pup joints in line with associated specifications, recommended practices and standards such as API 5CT/ISO 11960, API 5B and API 5A5 involving Visual Thread Inspection (VTI), Wet magnetic fluorescent particles inspection and Dimensional inspection on End finishing on TENARIS Connection (Tenaris Blue), NDE, Tubular heat treatment process verification for USAN Project. Validation of dimensional inspection reports of threads inspection and review the make up charts.

Lead TPI Engineer. Moody International, Nigeria. Oct, 08 – Dec, 08
I worked as company site representative for Addax Petroleum Nig Limited supervising the laying of 6inch diameter bulk line Maintenance / replacement from Izombe flow station to Ossu 3 location which the activities involves independent monitoring and verification of work items delivered by the various CONTRACTORS to the Addax. Clearing of Right of Way and Excavation, Fabrication of Spools and pig launcher / receiver at Izombe, Installation of approximately 4.8 km long GIJ delivery line that run through the existing ROW. Heat-shrink sleeve coating of field joints, Installation of a pig launcher at Izombe Flow Station and a pig receiver at Ossu 3 location on the captioned 6" GIJ pipeline, Installation of sacrificial anodes as designed to protect the 6-in line. Third party inspection supervision for supervised activities involving parent material / welding consumables identity, fit up and weld preparations, preheating, post weld visual inspection, welding procedures establishment, welders approval verification and In process welding surveillance.

Snr. QA Inspector. Moody International, Nigeria. Jan, 08 – Oct, 08
Participate as Company representative specialist for CHEVRON on OCTG inspection and performance testing at Vendor's threading plant. OCTG Inspection of threading/coupling of casings, tubing and pup joints in line with associated specifications, recommended practices and standards such as API 5CT/ISO 11960, API 5B and API 5A5 involving Visual Thread Inspection (VTI), Wet magnetic fluorescent particles inspection and Dimensional inspection on End finishing on different types of connections - API thread (BTC) and Premium thread (Atlas Bradfort connection), TENARIS Connection(Tenaris Blue, AMS etc), Hydril premium connection etc), NDE, Tubular heat treatment process verification.

Marine Warranty Surveyor. Moody International, Nigeria. Oct, 07 – Dec, 07
Warranty survey of winches and mooring system on Venture offshore barge for INTERSHIP at Amenam Koop (Total Offshore field). Coordination of single lift load out and sea fastening of Oron west south offshore well head platform for ADDAX Petroleum (Nigeria). I executed warranty survey on DB Dolphin offshore barge and towing vessel as operator role (ADDAX Petroleum) and supervised the installation activities involving parent material / welding consumables identity, fit up and weld preparations, preheating, post weld visual inspection, welding procedures establishment, welders approval verification and In process welding surveillance of Oron West south topside module platform and subsea anode clamp (bolted type) at ADDAX offshore field. I carried out review of vendors HSE plan, Quality plan and NDT reports on the project.

Snr. QA Inspector. Moody International, Nigeria. July, 07 - Oct, 07 Participate as Company representative specialist for CHEVRON on OCTG inspection and performance testing at Vendor's threading plant. OCTG Inspection of threading/coupling of casings, tubing and pup joints in line with associated specifications, recommended practices and standards such as API 5CT/ISO 11960, API 5B and API 5A5 involving Visual Thread Inspection (VTI), Wet magnetic fluorescent particles inspection and Dimensional inspection on End finishing on different types of connections - API thread (BTC) and Premium thread (Atlas Bradfort Connection), TENARIS Connection(Tenaris Blue, AMS etc), Hydril premium connection etc), NDE, Tubular heat treatment process verification. Quality assurance and quality control, monitoring and compliance of threaded pipes and related products in line with the Quality Control Plan (QCP) for CHEVRON by Tenaris Global Services. Validation of dimensional inspection reports of threads inspection and review the make up charts.

Snr. Welding/Coating Inspector. Moody International, Nigeria. March, 07 – July, 07
Supervision & inspection of fabrication of 14'', 12'', 10'' & 8'' riser clamps ( bolted & welded to jacket type), knee brace clamps, risers and long spools for Addax Petroleum Company by Maritimex Offshore Nigeria limited for ADRP1 and Oron WHP offshore Integrated Field Development (IFD) Upgrade Project. Verification for the correctness of welding consumables and dimensions, fit up and weld preparations are in accordance with drawings for the production of 14'', 12'', 10'' & 8'' riser clamps ( bolted & welded to jacket type), knee brace clamps, risers and long spools. Qualification of Welders and the welding qualification procedure and review or evaluation of NDT reports (radiographic films and MPT results). Enforcement of health, safety and environment (HSE) policies and quality control procedures. Coating inspection of 36 joints of 36'' X 1'' carbon steel pipe and Oriri 2 Offshore wellhead substructure platform for Goland Petroleum Development Company by IPES at Neptune Marine Base, Port Harcourt. Monitor and audit Project quality related activities to ensure correct and effective implementation of the project quality plan. Co-ordinate the preparation, establishment and implementation of the Project QC and administration procedures as well as the inspection & test plans as referenced in the Project quality plan.

QA (Mechanical) Engineer, SPDC, Nigeria. Jan, 99 – March, 07
I worked as contract staff supervising and implementing corrosion control activities on pipelines, vessels, heat exchangers and other equipment in SPDC's onshore /offshore facilities. Participated in project execution of corrosion control programs involving coating, routine pigging / intelligent pigging, corrosion inhibition and cathodic protection systems on SPDC's onshore/ offshore pipelines. Co-ordination of online gel de-sanding of crude oil pipelines & retrieval of stuck pigs in crude oil pipelines. Supervised Mechanical maintenance of the pigging traps and associated equipment. SPDC's Site Representative on field trial application of drag reducing agent of SPDC's Nembe Creek Trunk Line (NCTL) using Flow Improver. Supervision of the integrity assessment of crude oil lines by non-destructive testing involving in-line inspection or intelligent pigging.
My responsibilities or job description also covered facilities engineering and mechanical engineering activities in support of oil and gas production facilities, such as Gas compression and injection facilities, flow stations, pipelines and as well as crude oil loading Terminal facilities upgrade and revamps.

Completed Projects
* Retrieval of stuck pig in 14'' diameter Okordia –Rumuekpe crude oil pipeline for SPDC.
* Chemical /mechanical de-scaling and cleaning of 28'' diameter San Barth – Krakama (NCTL) for SPDC.
* On stream inspection involving intelligent pigging (using various TD Williams and Rosen Inspection tools) of SPDC's 3No. Trunk line and 6 No. delivery lines.
* Hydro - test of 10'' diameter KCA offshore platform to Bonny tie in manifold delivery line.
* Corrosion and bacteria control (application of biocide and corrosion inhibitor) on 20'' Kolo Creek – Rumuekpe pipeline (Weekly) for SPDC.
* Intelligent pigging digs verification on 20'' Kolo Creek – Rumuekpe and Rumuekpe – Nkpoku pipeline and 12'' diameter Imo River 1- Ogale M/f pipeline for SPDC. Routine pigging of over 246 km crude oil pipelines monthly and de-sanded 12'' diameter Adibawa-Okordia crude oil pipeline using gel technology.
* Soil resistivity survey for the design and construction of 3 Nos. cathodic protection ground beds.
* Field trial of drag reducing agent or flow improver chemical injection on Nembe Creek trunk line (NCTL) in Nembe field for SPDC.

Project Engineer - Static Equipment Maint. (PRIE/24), SPDC Nigeria. Jun, 94 – Jul, 97
Supervised all maintenance painting / scaffolding projects for SPDC's bonny tank farm and onshore/offshore facilities (KCA/KCB and BCLP). Instigated new coating applications / inspection for SPDC (East) Onshore/Offshore facilities such as flow stations, pipelines and manifolds. Provision of static equipment maintenance support service to SPDC (East)'s production department involving relief valves / process valves change out, statutory inspection on pressure vessels, heat exchangers, re-boilers and heaters, and minor mechanical structural repairs for on-shore / off-shore facilities. Team member for the decommissioning of crude oil production flow stations and its preservation of the idle static equipments. I ensured enforcement of health, safety and environment (HSE) policies, and maintenance and operation procedures/standards in the field by contractors in line with SPDC's HSE policy. Developed, reviewed and evaluated contractors' competencies to do their work safely and without adverse impact on the environment. Preparation of project execution plan (PEP) involving cost estimation, work scope, strategy and schedule. Ensured the desired level of quality of work and materials are delivered on schedule time as per specifications. Review and co coordinated daily Inspection reports of the Painting Inspectors, Pressure Vessel Inspectors and Mechanical Inspectors attached to static equipment maintenance unit of SPDC Eastern Division.

Completed Projects
* Maintenance painting of 35 inshore, onshore and offshore crude oil production flow stations for SPDC.
* Maintenance painting of 28 pipeline manifolds & offshore production platforms.
* Maintenance painting of 4 Nos. surface Bonny Terminal crude oil storage tanks and tank farm's transmission pipelines for SPDC.
* De - commissioned 2nos. crude oil production flow station (Opobo South & Utapate of SPDC.
* Statutory inspection of 165 pressure vessels / heat exchangers /scrubbers and change out 967 relief valves / 1690 process valves.
* Turn around maintenance of 4Nos. Gas production plants (Alakiri, Afam, and Obigbo & Oguta) for SPDC.
Repair/replacement/modification of facilities/equipment in flowstation, gas compression stations, gas processing plant equipment.
Maintain and upgrade of facilities integrity.

Coating/Painting Inspector, SPDC Nigeria. March, 90 – May, 94
Participated in the inspection of Bonny terminal crude oil storage tanks rehabilitation by visual and NDT techniques. I executed quality control and inspection (visual, NDT and DT) involving the maintenance painting programme of SPDC's crude oil production facilities (flow stations, manifolds and well heads) using different painting systems and blasting abrasive medium in line with NACE, BS, DEP, EMEP or ISO standards. I inspected and certified erected / dismantled scaffolds (independent fixed and mobile type) used within SPDC facilities. I had inspected structural and painting refurbishment of petroleum gas well heads. I supervised installation of cathodic protection system anodes and maintenance of Transformer rectifier / thermoelectric generator. I had executed cathodic protection monitoring involving Close interval potential survey (CIPS) and soil resistivity survey. I did provide technical supports for the load testing/certifications of lifting equipments within SPDC's facilities.

PROFESSIONAL EXPERTISE:
Good knowledge and experience with the international codes and standards such as NACE, API, ASME, AWS, ISO etc. as well as Shell DEP`s specifications.

COMPUTER SKILLS:
Familiar with use of PC (MS Office – word, excel, power point, Email, Internet etc.), familiar with PACER (computer aided maintenance management tool), monitoring of trends Corrosion Models (Shell Hydrocor) and pipeline toolbox.

Training/ Courses Attended:
1988 - Fire fighting and safety course, NNPC. Nigeria. 1wk.
1992 - Paint inspection course, TWI/SGS. Nigeria. 1wk.
1992 - Welding inspection (Steels), TWI/SGS. Nigeria. 1wk.
1993 - Basic site construction safety, (SGS). Nigeria. 1wk
1994 - Unsafe Act Audit course, SHELL. Nigeria. 1wk.
1994 - Security Awareness course, SHELL. Nigeria. 1wk.
1994 - General Safety Course, SHELL. Nigeria. 2wk.
1995 - Permit to Work Competence course, SHELL. Nigeria. 1wk.
1995 - Quality management Individual Awareness, course, SHELL. Nigeria. 1wk.
1995 - Occupational Health Management Seminar, SHELL. Nigeria. 2days.
1995 - Scaffold Inspection course, SHELL/ISI. Nigeria. 1wk.
1996 - Environmental Protection course, SHELL. Nigeria. 1wk.
2001 - HSES Competency course, SHELL. Nigeria. 1wk.
2002 - ISO 14001Awareness course. SHELL Nigeria. 1wk.
2002 - Enhanced Contract Management (Module 1), SHELL. Nigeria. 2wk.
2004 - Pipeline Pigging & Maintenance Course, SHELL. Nigeria.1wk
2004 - Advanced Safety Course, Nigerian Institute of Safety Professionals, SHELL. Nigeria. 1wk

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1520)

Go to Search Parameters...

Brief Description

Looking for swamper or labourer work ASAP

Well versed in contracts formation and administration, project management, claims mitigation and resolution, contract negotiation, subcontractor mangement, quality assurance on major projects thoughout the world. Results-oriented, with an ability to see any assignment to successful completion.

Multi Dsicpline Insepctor with working experience in both onshore and offshore fabrication/Installation/Hook-up

JIB

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

Dynamic, hands-on international oilfield operations Finance & Administration Manager

OBJECTIVE I am a dedicated worker looking for an opportunity for advancement. I am willing to go the extra mile to get the job done.

Experience in QA/QC documentation procedures and processes in a petro-chemical plant construction set-up covering various disciplines i.e. civil, structural, mechanical, electrical and instrumentation. Monitor and ensure that all required documentations are followed as per approved project quality

Control and Participate in the operations undertaken in the Telecommunication Centre on an assigned shift and to act as focal point for the gathering & dissemination of information communicated by the Radio, Telephone and Hotline communication channel. To effectively implement the Contingency plan

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Bsc Geology from the university of Ghana I am currently working with Newmont Ghana gold ltd as an Ore control Geologists.I have 2 yrs experience in both MIneral Exploration and Mine gelogy.

HR Management, Project Management, Consultant

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Leadership, Technical, Organizational, and Computer Skills.

Oilfield Managment / Technical Advisor / Sales / Light Well Intervention Engineering

Reliable & Independent MS Windows (all versions)

I have vast experience in pipeline engineering & integrity involving smart pig, pipeline cleaning, coating. Also, I have experiences in decommisioning of pipelines and skills in engineering maintenances involving static equipment, Corrosion & OCTG.

Landman

I'm Ahmed Mohammed Mousa Gaad with an Egyptian nationality working as Applications Senior Developer looking for the honor of joining an organization that has a reputation of excellence in its field such as your company.

Professional contract negotiator & administrator

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

HSE Learning/Development Professional seeking position in an industrial setting.

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level

Challenging business financial management position specializing in accounts and budgeting

Experience in Oil and Gas Industry, Marine, Certifications, and more

Communications skills, Team player, Document Control, Information Management, Archivinng, Scanning & EDMS

I am currently the ESP / VSD Supervisor for Encana-Ecuador in the Tarapoa field. I have extensive ESP experience with all lines of equipment and most lines of surface equipment.

I have served as the catalyst for successful Operations, Production, Projects, Technical Support, Client Relationship Management and Team Management, complimented by Bachelor’s Degree in Engineering (B.E) – Electrical & Electronics , Bachelor of Science (B.Sc) in Physics & Six sigma –Green belt

Experiences as QA/QC inspector and Welding in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Floating Production Storage Offloading FPSO (Offshore), Platform Modification (Offshore), Refinery and Pressure

- Most Recently, Over 2 years experience as a E&I and Piping Buyer for a Japanese EPC Contractor. - 11 months experience as a Buyer for a Japanese EPC Contractor - Over 3-1/2 years experience as a Junior Buyer/Spares Co-Ordinator

B.Sc. HONS with 7 years of expe. in HSE field in oil & gas secter

Project Coordination

Accounts Payable & Receivables, Bank Reconciliation, Debtos and Creditors Reconciliations, Corporate Taxation, Defereed Taxation, Part of Reporting, Inter Companies balances

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

Teamwork, analysis, attention to detail, relationship building, customer service, time management, motivator, leader, work-driven, practice good ethics, and bilingual (Spanish). 100% independently funded through college.

Drilling Supervisor - 17 years Drilling Experience - 7 years International Experience - Safe and Efficient

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Hydroblaster

Proficient or familiar with a variety of engineering/design softwares and office tools including Flexcom, Mathcad, Autocad,Abaqus,FS2000, Windows, UNIX, Linux, Sun Solaris, Microsoft Office tools, Open-office tools, C,C++, Java, Fortran and Perl

Cost Controller - B.Sc. Degree in Commerce Accounting Branch

DEPOT OPERATIONS,LOGISTICS,ACCOUNTS RECEIVABLES/PAYABLE,PROCUREMENT-6YEARS

Free! Qualifications - 500 Ton Master Oceans Inspected- 1600 Ton Master Fishing Vessels Oceans - 3000 ITC Master Fishing Vessels Oceans - Able Bodied Seaman Unlimited -ARPA STCW Certified HazWoper TWIC

Oil and gas lawyer with in-house experience

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

Junior Petrophysicist and Well Log Analyst, Geophysicist

Over 7 years experience in Quality Control Inspection related to the Oil and Gas industries, of which 6 years have been spent in the Sultanate of Oman as a Senior Pipeline or multi-disciplined inspector, acting as a Third Party inspector on numerous onshore projects.

I have 7 years experience onshore Australia with an accident free work history. I am a very safety conscious person looking for an international position to enhance my knowledge and experience in the oil industry.

RPL Certified* Landman with an MBA and background in Project Management

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out