Resume - Analyze and perform petrophysical evaluation, reservoir characterization, volume...

Misco Jobs

Resume #42560

CONTACT INFORMATION:
View contact information...

EDUCATION
* 2004 M.Sc. (thesis based) in Petroleum Engineering, from University of Alberta,
Canada.
* 1994 M.Sc. in Geology with "First Class Fourth Position", from University of
Karachi, Pakistan.
* 1993 B.Sc. (Hons.) in Geology with "First Class Second Position", from University of
Karachi, Pakistan.

PROFESSIONAL EXPERIENCE
2004 – To Date Reservoir Engineering Department - Pakistan Petroleum Limited

Working as Petroleum Geologist in the Reservoir Engineering Department of Pakistan Petroleum Limited. My job responsibility is to analyze and perform petrophysical evaluation, reservoir characterization, volumetric reserve estimation and economic feasibility of new exploration blocks as well as carry out sequence stratigraphic modeling of reservoirs in order to provide geological backup services to Reservoir Engineers.

Duties And Responsibilities As Petroleum Geologist

* Perform petrophysical evaluation (Processing and Interpretation) to analyze the well log data for hydrocarbon evaluation.
* Perform volumetric reserves estimation (deterministic and probabilistic) by using wireline logs, petrophysical data, DST data and depth structure map.
* Prepare economic evaluation of new exploration blocks to take decision for the bidding of new blocks or drilling wells in the new exploratory blocks.
* Conduct Sequence Stratigraphic Studies of the reservoirs to depict the aerial distribution of reservoir quality formations, using log and seismic data.
* Build 3-D geological models for reservoir characterization / static model using Roxar Irap-RMS 3-D geological modeling software for efficient reservoir development and improving recoveries.
* Participate in field development and well planning working/discussions and provide suggestions to take decision for the location of perforation zones/new development wells based on geological and engineering data.
* Supervise core analysis studies and well logging jobs for various exploratory and development wells.
* Communicate with servicing company's engineers / geologists as well as with the company's wellsite geologist, during the logging job at the well site, to acquire data properly. Occasionally visit well site to witness the wireline logging job.

* Perform technical evaluation of bids submitted for particular softwares as well as for the evaluation of wireline logging service company's capabilities to run the job for the assigned wells or field.
Participate in Joint Venture Partners' OCM/TCM to present results and to discuss and finalize commitments related to exploration and field development planning.
Work on Strategic Plan for future ten and twenty-five years, which includes the estimation of production profiles and Work Programme of existing and exploratory fields.

SOFTWARE SKILLS
* Excellent command on the Reservoir Description Module of Petroleum WorkBench which is utilized in wireline log processing and interpretation as well is in mapping and simulation.
* Excellent command on Surfer Mapping Software to be utilized in contour area / rock volume estimation as well is in the preparation of various types of maps and cross sections.
* Excellent command on Reservoir Evaluation Program (REP) utilized in volumetric reserves estimations. Equally good in utilizing Crystal Ball for volumetric reserves estimations.
* Utilizing in-house spreadsheets in economic feasibility evaluation.
* Awareness of various modules of Roxar 3-D Geological Modeling Software.

1996 – 2000 Mud Logging Section - Baker Hughes INTEQ

* Worked as Data / Pressure Engineer in Doha, Qatar (Offshore) from April 01 to August 07, 2000 for Maersk E&P.

* Worked as Data / Pressure Engineer in Pakistan from August 25, 1996 to March 31, 2000. During this job I have worked with the following clients: Union Texas Pakistan (UTP), Pakistan Oil Field Limited (POL), OMV Exploration Pakistan, Tallow Exploration Pakistan and Premier Exploration Pakistan. Following are the overseas operations, where I worked,
* In the Gulf of Thailand for Unocal Oil Thailand Limited and Maersk Oil Thailand (Off Shore - Directional Drilling).
* In the "South Sea of China" for Shell China Petroleum Development. Offshore, directional drilling.
* In the "Penghu Basin Offshore Taiwan" for CONOCO Taiwan E & P B.V. Offshore, directional drilling.
* In the "North-East part of Malay Basin" for Fina Exploration Minhi Vietnam. Offshore, directional drilling.

Duties And Responsibilities As Data / Pressure Engineer

* Operate and maintain the logging unit and equipment.
* Evaluate lithology samples and report any hydrocarbon shows.
* Produce and participate in the study of well logs e.g. Formation evaluation Logs, Pressure Logs, Temperature Logs, Drilling data logs.
* Participate in geological studies, interpretation and correlation while drilling.
* Estimation of Formation Pore Pressure on the basis of DXC plot, Temperature Log, Formation Evaluation Logs, Drilling Data Logs, Shale-cuttings i.e. pressured cavings, and mud properties.
* Writing of drilling summary and calculation of mud hydraulics using XLbase software on daily basis.
* Bit optimization on client request.
* Monitor rig functions, operations and downhole conditions for formation evaluation, drilling efficiency and safety at the rig site.

1995 – 1996 University of Karachi, Pakistan
* Worked as Lecturer in the Department of Geology, University of Karachi, Pakistan

PAPER PRESENTATION / PUBLICATIONS
* A paper was presented by co-author on "An Investigation of Extensional Viscosity of Polymer Based Fluids as Possible Mechanism of Internal Cake Formation" in SPE International Symposium and Exhibition on Formation Damage Control Lafayette, Louisiana, U.S.A., 18-20, February 2004. The same paper is being published in Journal of Energy Resources, 2005-6.

* Read a research paper on "An Investigation of Formation Damage Characteristics of Xanthan Gum Solutions Used for Drilling, Drill-In, Spacer Fluids and Coiled Tubing Applications" at CIPC (Canadian International Petroleum Conference) as a Principal Author on June 10, 2003, held in Stampede, Calgary, Canada.

PROFESSIONAL COURSES AND TRAININGS
* Attended a course on "Block Evaluation and Volumetric Reserve Estimation" from April 3-7, in Islamabad, organized by PPEPCA. Course was conducted by Mr. Garret Maure, President, MaurOil International Calgary, Canada.
* Attended an in-house 5-days (March 13-17, 2006) course on Orientation and Introduction to Roxar Irap-RMS 3-D Geological Modeling Software. Worked on demo data to build a complete 3D Geological Model.
* Attended a course on Wireline Log Interpretation, 23-27th May 2005, in Islamabad, arranged by PEPCA.
* Attended a course on "Fundamental of Core Analysis", 26th-28th April 2005, in Islamabad organized by Core Lab Pakistan.
* Attended a five days course on " From Reservoir Characterization to Flow Simulation: Including Fracture Network" in July 2004, arranged by Beicip Franlab in Islamabad, Pakistan.
* Attended an Advance Safety School from March 05 – 09, 1999, organized by Baker Western Geophysical Pakistan in Dadoo, Sind (Pakistan). Mr. Peter from FRONTIER MEDICAL, United Kingdom conducted this five days course.
* Attended a safety training school from December 01 – 06, 1997, at ALERT DISASTER CONTROL SAFETY AND SURVIVAL TRAINING CENTER, Singapore. This course included, Personal Sea Survival, Helicopter Underwater Escape Training, Breathing Apparatus H2S Awareness, Hand Portable Extinguisher, Fire Fighting & Emergency First Aid / CPR.
* Six weeks attachment with the Hydrocarbon Development Institute of Pakistan (HDIP) Karachi Laboratories, February 26 to March 10,1996. During this attachment performed various IP & ASTM Standards Tests of crude's oils, fuels oil, lubricants, asphalt and greases.

COURSES In M.Sc. PETROLEUM ENGINEERING
* Oil Well Drilling & Completion
* Fundamental Of Well Test Analysis
* Well Log & Formation Evaluation
* Applied Reservoir Engineering
* Fluid Mechanics Natural Gas Engineering
* Modeling In Petroleum Reservoir
* Advance Clastic Sedimentology
* Petroleum Geomechanics
* Reservoir Simulator Development
* Petroleum Production Techniques

COURSES In M.Sc. GEOLOGY
* Petroleum Geology
* Engineering Geology & Geophysics
* Sedimentology

PROFESSIONAL MEMBERSHIPS
* Society of Petroleum Engineers (SPE).
* Geological Society of America (GSA).

REFERENCES
References will be available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1522)

Go to Search Parameters...

Brief Description

can apply any job which you think I am fitting for

Interdisciplinary exposure to sciences and arts: Engineering-Business-IT-environmental (which is a very rare profile). Highly developed set of skills: Coordination skills, Pedagogic skills, and Critical evaluation skills

Welding Inspector

Welder Tig Mig Mag Arc welding wet welding under water diver 5G 6G 6GR

Workover and well services superintendent

Analyze and perform petrophysical evaluation, reservoir characterization, volumetric reserve estimation and economic feasibility of new exploration blocks as well as carry out sequence stratigraphic modeling of reservoirs in order to provide geological backup services to Reservoir Engineers

I did SSC in 2002 and Intermediate in 2004. I did Msc/BS Geology from the University of Peshawar,Pakistan in session 2008. I have field experiences in structure, sedimentalogy and stratigraphy.

Asset Management Application Support

See below.

Excellent analysis and problem solving skills and able to multi task in industrial sites, factories and refineries. Have knowledge of electrical utilities and power. Expert ability to resolve conflicts during all stages of a project.

Maintenance Manager with BSEE degree & current MSHA electrical cards with hands-on experience in all aspects of mechanical, electrical, and hydraulic systems.

27 years experience primarily in oil & gas EPC/EPCM Project controls, Contracts, project management and engineering.

I am a qualified analytical chemist, possessing extensive experience in international aspects of operations (U.S. EPA regulations, ISO 9001/14001/17025 standards, Project Safety Management PSM/OHSAS) with a wide range of technical proficiency in Health Safety Environment, waste management and docume

Mercahant marine

Fully certified including First Aid and ready to begin Oil & Gas Career as a Labourer. Ready to commence work immediately.

I am retired from the Royal Canadian Mounted Police (R.C.M.P.), having left in July 2006 with almost 25 years of service. Since then, I have obtained my P.I. licence and conducted investigations for different firms

M Tech with 10 years exp in Instrumentation& Control field of Fertilisers, Utilities and Power

Good experience in the field of computer works by using operating, installation and

Currently employed through Nabors Drilling as Motorhand. Previous experience as Derrick hand, rough neck, and lease hand. H2S ticket through Pitts, Nisku Alberta. Presently studying for my first line ticket.

Aplly for rigger foreman

Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs

Pipeline Integrity Engineer with over 10 years of experience and expertise in pipeline and asset integrity management, pipeline inspection, MFL technology, corrosion diagnostics, pipeline integrity assessments, pipeline integrity program development, and project management.

With excellent communication and coordination skills, I have the ability to lead a team to success and deliver projects in the given time frame. I am confident that my positive approach towards my work will benefit the organisation. My strength lies in my hardworking nature, sincerity and the willin

Please Look closely at my Resume I am in Dire need of a job and will relocate immediately for a job.

job in geology

There are three distinct areas to my trade & training in the R.A.F, Mechanical, electrical and corosion fault finding.

Former Australia SF; SAS Regt. 19 yrs int'l experience, 3 yrs Regional Manager China & Sth EA. Strategic planner drawing on yrs in difficult & demanding environments.

8 yrs experience in oil and gas industry, looking to start career in offshore or allied industry, available immediately

Administration skills; Easy to work with Windows, MS Office, Internet, Outlook; Many years experience on various vessels

I was completed b.sc. in chemistry and also completed diploma in industrial fire and safety.Iam having 7 years 6 months experience as a safety officer.In this experience 5 years in Indian and 2 yaer 6 months gulf countries.

Coiled Tubing Supervisor

GRADUATED WITH MBBS DEGREE (FIRST DIVISION) FROM SSR MEDICAL COLLEGE,UNIVERSITY OF MAURITIUS,IN 2005,COMPLETED INTERNSHIP FROM St STEPHENS HOSPITAL,NEW DELHI,PRESENTLY WORKING AS A MEDICAL OFFICER WITH HIMACHAL PRADESH STATE GOVT.

Driwer of hard machine , Field officer , translating - English , Russian , Serbian ,Croatian , work on oil platform , Drilling etc.

Directional Driller w/ 13 years experience

B. Sc. - Dissertation in Polymetallic Ore

I am a power plant proffessional having more than 16 years operation experience in various field of plant like errection, commissioning, steam blowing, alkali boilout and chemical cleaning of boiler and lines, trouble shooting in Boiler/steam turbine/gas turbine and other power plant auxiliary.

Executive Assistant/Office Manager

6 Year experience in the field of Health Safety & Environment in different Construction Projects (especially Oil & Gas Plants); Working as HSE In-Charge (Plant Services) in DESCON Engineering Qatar L.L.C; Worked as HSE In-Charge (CTJV Camp Project ) in DESCON Engineering Qatar L.L.C(Qatar)

Accounting

5 years experience of project document management with both Vendor & Design Document Control experiences. Considerable overseas work experience in Onshore & Offshore documentation, records co-ordination and archive practice including multi-discipline in the oil/gas industry. Knowledge of IDMS, EDMS.

Painting, Insulation & Fireproofing

Roustabout

A competent professional with around 11 years of experience in the areas of Information, Physical security, ability to design, execute, implement and impart training on security systems. Possess consultative orientation and ability to deliver a broad range of innovative and value-added services. Abi

Free! I have 16 years post qualification experience as a Project Engineer, project Controls engineer, Cost Engineer, Planning and Scheduling engineer. I have worked both on opeerator's team and contractor side. My experience spanned through deepwater projects in oil and gas industry, EPC projects etc

HSE Manager On An Oil And Gas Construction Project With Over 1000 Employees; Construction Safety Officer Designate; Occupational Health, Safety And Environmental Leadership Diploma Near Completion

Entry level, I have skills in shiping,and 4 years experience in army. Have skils in painting, tractors etc.

•BSc in Engineering with 8 years of experience in Oil & Gas EPC and Communications industry. •Field support and Loop test coordinator for Petro-Canada RCP project site in Canada. •Excellent interface abilities with client/vendor management teams •Experience in preparing as-built data sheets, ins

Experienced Engineer (Quality Assurance, 6 Sigma, Design V&V and Leadership)

Obtain a position utilizing my degree, knowledge and skills where applicable, especially in a support role in the areas of Information Technology and Systems

Looking for swamper or labourer work ASAP

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out